In most cases this obviously isn t possible wood deck sanding machine rental news we only waited about 48 hours for most of our furniture. Means, you have to wash the wooden surface and sand it again. This website uses cookies to personalize your content including adsand allows us to analyze our traffic. Sometimes you can power wash or scrape the wood to the point where you can stain. Sign up to join this community. Sander type: You will be working on a wooe, so we would recommend the belt sanders as they are powerful and fast.

Pressure wash: The first step is the pressure washing of the deck. Be careful with the settings of the pressure washer. If the deck is made of softwood like cedar, pine or spruce, use a wide wan and decide the distance between the wand and surface. If you see that the wood fibres are lifting as you wash the floor, stop right away.

Take a hidden spot on the wooden floor to test the pressure and wand distance. After the wash, let the deck dry for a couple of days. Prepare the surface: Check for every screw and nails.

Use a nail punch to countersink every one of them otherwise they will damage the sander. Make sure that all the nails or screws are countersunk for at least a couple of millimetres below the wooden surface.

Sanding the deck surface and board edges: Here comes the part where you have to patient, especially if you are working on a large area using a handheld sander. Make sure that you are not using the sander with any rough grit as it can excavate Wood Deck Sanding Machine Rental Us the deck if it is made of any softwood. Wear safety glass and particle mask as the dust spread by the sander is hazardous if you inhale it. For better comfort and ease, you can also use a hearing protector and kneed pads.

Check the weather for rain, if it rains while you are sanding wood deck or after sanding, then you will be back to level one.

Means, you have to wash the wooden surface and sand it again. As explained earlier, you should use a belt sander as it will be convenient and fast. For removing existing paint or stain using an orbital sander, start with grit sandpaper and go over again with sandpaper of grit for a smooth finish.

Apply medium pressure and check for the evenness as you move forward. Use different sanding techniques depending on the surface of railings, deck area, and board edges. Sanding outer edges can be a difficult task, especially if you have a low bottom rail with a series of pillars. In case of an orbital sander, use a 60 to grit sandpaper and take care of the evenness as stains tend to get absorbed easily into uneven surfaces.

Sanding the railings: One of the most important parts of the process is to sand the railing in an even manner as it is the most visible part where people generally focus.

Moreover, it should be smooth and there should not be any splinters left to injure any hands. Use sandpaper with 80 to grit, but do not stain such smoothness that stains cannot penetrate.

Sand using your hands with sandpaper where the sending device cannot reach. Now you know the various types of desk sanders that can make your deck shine. Before you scroll down and check the top picks for the best sanders, we are mentioning some tips that will help you to choose the right model.

The idea is to leave no room in your mind for any doubts. Let us begin. Sanding area: We know that you want to sand the wooden deck. The question is, what kind of deck you are going to work on? If the deck has variable surfaces or corners, you need a versatile sander that can work on all of it. Otherwise, if you see that the deck is flat, then all you should look for is — speed and power.

Sander type: You will be working on a deck, so we would recommend the belt sanders as they are powerful and fast. Orbital sanders look attractive but they are built for precision and control. They lack the power and ability to cover big areas in short time. Power input: There are two types of deck sanders — wired and battery operated.

Wired sanders have high ratings over battery operated ones as the former are better to work for long hours. By chance you have to buy a battery operated sander, then look for those coming with Lithium-ion batteries.

Price: It is not necessary that you have to pay a high price for a good sander. If deck sanding is the only job that you are going to perform with the sander, then it is quite possible that you get a fine working model without paying hefty price. All we mean is that you should compare all the features as well price, then make the purchasing decision. Dust extraction: Sanders create a lot of dust and debris while doing its job. It is better to have a sander that has an inbuilt dust collector, otherwise, you will be the one who has the clean the area.

Cleaning can be tiring. Above all, wood dust can create a lot of health problems. Dust particles spread while sanding can cause some serious health troubles including allergic reactions and lung damage.

Use a sander with a dust collection bag or always wear a face mask or respirator while sanding. If you will take precautionary measure then it is not. Wood dust is a known human carcinogen that can cause irritation, breathing problems and allergies.

Use respirators and dust masks always while working on the wood. No, you will not be able to. The sanders will not work on a wet surface. Let it dry for a couple of days if is wet, then sand the deck. Belts used in the sanders are thick, last longer and are costly. On the other hand, an orbital sander also known as random orbital sander works with a sanding pad or disc of 5 or 6 inches and different grits varying from 60 to Dicks used in orbital sanders are cost-effective but needs frequent replacement.

Here you can get more info about the disc sanders. Overall, belt sanders are more powerful and work better then orbital sanders but the former is difficult to control for beginners and can harm the wood if not used properly. As we come to an end, we would suggest using belt sanders, Makita is the best of all. Table of Contents. View On Amazon. Check Price On Amazon. Home Rent Equipment. We've been doing this since Floors—that's it. Read this before you rent.

Which machine do I rent? When all else fails, read the manual. Come to the store! We d recommend using a stain and then a clear varnish on top. We ve seen a few floors where a coloured varnish has been used which over time inevitably wears away and gets the odd chip and scratch. As the colour chips away, any marks are then really visible. If you stain and then varnish the floor, for the most part only the varnish will wear away leaving any chips less visible.

Your floor is essentially unprotected after sanding. You should aim to get it varnished or oiled as soon as possible. The manufacturer s guidelines will vary, but as a rough guide around 3 coats for normal traffic areas and an extra fourth coat for high traffic hallways like hallways is what you should be aiming for.

You shouldn t move your furniture back till the varnished is entirely cured, which depending on your varnish can take up to 14 days! In most cases this obviously isn t possible and we only waited about 48 hours for most of our furniture. Timescales Don t underestimate the amount of time it will take to sand your floor. If you had just one room the same size, it probably wouldn t take as long, as you d have fewer edges and less manoeuvring to do.

Varnishing the floor was surprisingly quick. I d say it didn t take us much longer than an hour to varnish all rooms once. The sanding paper price varies per sheet, depending on the Grit, but the max price is R25 per sheet. You will only be charged for the paper that you take, so better to take more than less.

The Belt sander for the edging costs R per day incl Vat, and R for a weekend.

Free Router Projects Plans On Mac Tape Measure Digital Readout Letter Full Extension Side Mount Drawer Slides Over