This DIY Under-Desk Organizer Is Easy to Build, Even in Small Spaces

Do you need DIY desk plans? My daughter had been begging for her own desk ever since she saw the Desk with Hidden Wireless Charging. I under desk drawer diy to make her a DIY desk with eye-catching details like tapered dgawer, cove molding, and a chamfered hardwood top. Before we get started, make sure to follow me on YouTube djy, Facebook and Instagram to keep up with all my latest builds!

Affiliate links are used on this page. See my disclosure page for info on affiliate deawer. First I started by cutting the legs for the DIY desk to size and using my stop block drsk my miter saw stand which is great for repeatable cuts.

Using layout marks to keep the legs in order, I marked the bottom of the legs for a small taper. The taper will be on the inside two faces of each leg. To cut the tapers I used a simple jig. The edge represents the cut under desk drawer diy, but keep an eye on which taper you cut first.

Always think about the second cut before making the first. After clamping down the DIY desk leg and running it through I flipped it over and took a second pass for the other face.

Finally I finished up the leg tapers on the other draser using my layout lines for guidance. Back at the workbench I used the reference lines to reorder the legs. You can see how the tapers will look when assembled. When considering how to build a desk you under desk drawer diy use a floating or solid side panel. I under desk drawer diy to go for a solid side with a faux floating panel look.

First I cut the plywood to size and then added pocket holes to the edges of the panels with my K4 jig. Then I moved on to drawet the side panels. I laid out two legs making sure under desk drawer diy tapers were oriented correctly for the outside facing down. This will give a flush surface for the drawer slides later. Clamping the parts tightly helps keep them from moving as the screws go in.

The outside of the side has a faux frame and panel look. Then I attached them with glue and brad nails. I wanted a nice finished look for the desk with drawers so I used cove molding around the inside of the panel.

To fit the molding I cut a miter on one end of the trim then took it to the panel and marked it for the second cut. I continue this approach all the way around the panel.

Next I secured the molding in place with glue and pin nails then came back and filled all the nail holes with wood putty.

I needed to hide the pocket holes on inside left panel to prep for painting later, so I glued small sections of wood dowels into the holes. Then I tapped the dowels in with a hammer then after the glue has a chance to setup I cut them flush with a pull saw. Next I cut the full sized idy back to length on my table saw then drilled pocket holes on the edges. I clamped the under desk drawer diy in place and attached it with pocket screws.

The front stretcher of the DIY desk is cut to the same length and is also given pocket holes for assembly. I attached the front stretcher with pocket under desk drawer diy. I cut the parts for the box that holds the drawers from my sheet of plywood. I cut the strips long and used glue to attach the edge banding. After the glue dries I cut the under desk drawer diy strips flush with my pull saw.

Next I cut the panels to proper length on the table saw. The vertical panel needed a notch for inder front stretcher. This cut can be made with under desk drawer diy bandsaw like I used or with a jigsaw or hand saw. I assembled the two panels together first, then attached them to the desk side and back. I attached the panels to the side first then to the top stretcher. This establishes the squareness of the front of the box then I worked my way around the rest of the box.

A desk with drawers obviously needs a place for them to go so I added couple of dividers to establish the openings for the drawers. These are cut to size to fit the openings and attached under desk drawer diy pocket screws. I started with rough lumber and took it through the milling process to get dimensioned boards for my top glue up.

With all the boards dimensioned to size but left a little long Under desk drawer diy glue up the top. I used ddiy good amount of wood glue to get a solid connection then clamped that top within an inch of its life. The more clamps, the better. Nuder I took the top for the DIY desk out under desk drawer diy the clamps.

I knocked down the glue joints and got rid of any excess glue then under desk drawer diy finish sanding. Then I put a chamfer on the underside of the front and sides of the top for the DIY desk. I used my compact router and made multiple passes to get to the size chamfer I under desk drawer diy. After a final sanding I applied a coat of oil based polyurethane. I ended up doing 3 coats in total to withstand the wrath of a 6 under desk drawer diy old girl.

I have a whole post and video on How to Make Drawers in 6 Easy Steps so for more information check that out. But these new corner clamps from Kreg really work great to align the drawer. I made the boxes and attached the bottom just like I show in the post referenced above.

Then I apply veneered edge banding to the tops of the drawers to give them a little cleaner look. Each drawer will also get an inset false drawer front.

Each slide is pre-drilled and attaches with screws to the sides. Before installing the drawers I used a biscuit joiner to cut slots into the sides, back and front stretcher. Then I pulled the drawer and slides out and attached it to the box. For the upper drawer and the under desk drawer diy drawer I measured where I wanted the slides to hit on the drawer then drew a line across the side of the drawer.

To mount the false fronts on the drawers I drilled two holes in the front of each drawer a few inches from the side. Then I drilled the holes for the drawer hardware on the drawer fronts. Drawrr positioned the drawer fronts using my favorite playing card spacing method and put screws through the drawer pull holes into the box. This holds the drawer perfectly and you can secure it from the inside through the holes drilled earlier.

Now draweer the screws from the front, drill through the box and install your drawer pulls. This desk has just enough details to set it apart and my daughter is going to enjoy it for a long time to come. Check out my other Furniture Projects for more builds!

All opinions are my own and are not filtered by the sponsor. Log in to leave a comment. Fix This Build That. Create the Side Panels for the Desk When considering how to build a desk under desk drawer diy can use a floating or solid side panel. The cut face is rough afterwards and can be cleaned up with a chisel. Create the DIY Desk Top I started with rough lumber and took it through the milling process to get dimensioned boards for my top glue up.

The clips undfr under desk drawer diy the slots and get screwed to the top. I predrilled and attached the slides on the line making sure they were flush with the front.

Feb 25,  · Turning some boxes I made years ago into some drawers to go undera table in my www.- : Matthias Wandel.

Telescopic Slides For Drawers Guide Carpenter Tool Vector Limited Fein Turbo Ii Dust Extractor Jacket 10 Table Saw Blade For Ripping Line