Please note. However, if you are contemplating refinishing hardwood floors yourself it pays to research the best techniques and be as prepared as possible, to avoid a bodged job that will just make Wood Floor Sanding Machine Philippines Map your floor folor awful! It is wood floor sanding machine philippines guide that you use an electric sanding machine to sand the floor in order to save some time. Pads attach to the sander base. We recommend that you use an oil-based stain for this reason, as they fooor take longer to dry leaving you more time to do the job! Have You Considered?

Pads attach to the sander base. Be sure the sander is running at full speed when you lower it to the floor. It is also important not to move the sander too quickly across the boards. Above all, remember to never turn the machine off while it is resting on the floor. For any of these different mistakes, the consequence is the same: circular scratches on the floor surface.

Disclosure: BobVila. You agree that BobVila. All rights reserved. You cannot underestimate the amount of dust this job will produce, and polyurethane varnish can give off pretty strong odors!

Please take care to wear the correct protective clothing — boilers suits, dust masks and goggles during sanding; vapor respirators, neoprene or vinyl gloves during sealing. Not all sanding machines are equal! Beware, even the most proficient DIYer may be no match for an unruly drum sander. These large beasts are notorious for being heavy and cumbersome, making it difficult to ensure even sanding, and they often leave marks that become very noticeable when you apply your wood stain!

That is why we recommend that you specify with your machine rental store that you want a large random-orbital sander, as the sanding action this type of sander performs is less likely to leave marks and is not at all sensitive to the direction of the grain, making it much less cumbersome to use.

You can also rent smaller palm held sanders that will be useful for getting into corners and along the edges around built-in cabinets etc. The Design Sponge website has the low-down on how to use a random-orbital sander when refinishing hardwood floors, and the advice in their Sanding article rings true:. If you leave it in one place for too long, you will have a sanding circle that looks like a little alien space ship landed on your piece! Begin with a medium-grade sanding disc to remove Wood Floor Sanding Machine Philippines Model the old finish from the hardwood planks — grit works best.

Sand the floor carefully making sure not to miss any areas. Use the edging sander to go along the edges and get into corners. Use a sharp scraper to lift off any areas where the old finish is particularly stubborn. Then sand again with a finer sanding disc, say an grit one, and then a final go over with an even finer one — around grit. Try and sand the whole area in one go with a particular grit grade before moving to the next grit to ensure even sanding, and periodically vacuum the floor between sanding to reduce dust.

After the final sanding do a really careful vacuum and wipe the floor down with slightly damp tack cloths. Move on to applying the stain in a thin, even layer. It is important that you work relatively quickly but methodically at this point. It is better to apply the stain to smaller sections of the floor rather than all at once, but at the same time you want to avoid the stain drying out thus creating overlapping marks where two areas of stain meet.

We recommend that you use an oil-based stain for this reason, as they generally take longer to dry leaving you more time to do the job! You can use brushes, rags or porous sponges to apply the stain — and then use a dry rag to wipe away any excess. It is also possible to apply the stain with a high-density foam roller, but that can tempt you to do larger areas and result in overlapping marks.

Allow the stain to dry thoroughly before moving to the next stage. It is imperative to seal the stained floor to protect your hardwood floor from water damage, scuffs and scratches. Please note; any purchased items that are returned unused, in the same condition as they were sold, will be fully refunded.

We recommend the Floor Edging Sander with this item to get right up to the skirting board. Renovating old board, traditional parquet and block wooden floors is easy with this purpose-made, heavy-duty drum floor sander, removing imperfections, old finishes and most decorative stains to leave the surface ready for varnishing or polishing. Note: Must only be used with a disposable dust bag - an efficient and convenient way of collecting dust.

You must wear all round protection grade 1 goggles to EN B — for less hazardous work grade 2 spectacles can be worn. Residual Current Devices protect from electric shock. Strongly recommended for electrical equipment used outdoors or in damp conditions. This tool can be used intermittently for up to 8 hours before reaching vibration Exposure Limit Value.

Pocket Hole Jig Lowes Canada Forum Woodworking Projects That Sell Youtube 50