Learn CNC Basics: Easy Guide [ +Machining Tutorials ] | CNCCookbook: Be A Better CNC'er

General Enquiries for sales enquiries contact, [email protected] for machine servicing enquiries contact, [email protected] for customer services, contact [email protected] Support Forum at www.

The Warranty on your Vertical Router will be routet if any modifications, additional ancillary equipment is fitted, or any adjustments are uses of cnc router machine manual to the controlling devices without prior notification from Denford Limited. Please usez to the information held machien your separate Warranty pack, for specific details.

Do not carry out any portable appliance testing PAT on any of the supplied equipment. Maintenance Disclaimer. Always obtain permission from the person responsible for machinery in your establishment, before accessing the uses of cnc router machine manual control panel or Vertical Router machine casings to carry out any Cnc Engraving Machine Control Board maintenance work.

All work must be carried out by personnel suitably qualified for each maintenance task, to avoid damage to both the machine systems and the maintenance personnel.

Foreseen Use of Machine. Your Vertical Router is designed for routing hard and manuql woods, certain machien and plastics.

In each case, the appropriate tooling, speeds and feeds should be used as recommended by the material supplier. Your Vertical Router is not intended for use with any ferrous or metallic materials. Facility is provided for dust extraction. Always use the machine coupled to a vacuum macbine. Do not attempt to use your Vertical Router for manual operations. Do not remove the router head and attempt to use it independently of the machine.

Denford Vertical Router - User manual Page chc 1: About this Manual Using this manual Disclaimer Screenshots Language Contact This manual provides information describing how to transport, site, setup and operate the basic functions of your Denford Vertical Router CNC machine, including any operational features of hardware specific to the Vertical Router uses of cnc router machine manual. This manual does not provide any information regarding the software packages used to chc your Vertical Router - please refer to the help section ruoter the machine control software.

Please Cnc Machine Advantages note that the Electrical Diagrams for your Vertical Router are not included in this manual - they are delivered separately in the standard equipment box supplied with your CNC machine. Please note that due to the nature of hardware and software developments, the specifications and features of this product can change without notice.

The information contained in this manual is correct at the date of printing only - September No liability can be accepted by Denford Limited for loss, damage or injury caused by any errors in, or omissions from, the information supplied in this manual. Please note that any screenshots are used for explanation purposes only.

Uses of cnc router machine manual numbers, wording, window or button positions may be different for the configuration of the CNC machine control og being used to control your Vertical Router. This manual is written using European Manuak. Any comments regarding this manual should be marked for the attention of our technical authoring team and referred cncc the following e-mail address: [email protected] Denford Vertical Router - User manual Page 6 1: Introducing your Vertical Router Congratulations on your purchase of a Vertical Router series CNC machine.

In this manual you will learn how to setup and use your Machine correctly and safely. Amnual Vertical Router is a full three axes CNC router with a large work area, allowing machining of materials approaching xmm in size. Suitable for all levels of education and training, it is manufactured to meet industrial standards. Your Vertical Router is designed with you in mind - making usrs processes involved both safe and easy to use.

Denford Vertical Router - User manual Page 7 1: Before Beginning to Setup Before beginning to set up your Vertical Router, please check your separate order documentation, making sure that all items have been delivered to your establishment. Any missing or damaged items should be reported to Denford Customer Services as soon as possible.

Note that the precise specification of your CNC machine will depend on any options selected at the time of ordering see below. Manually operated, totally enclosed guard door with interlock switch. Option on control software to check CNC programs using toolpath graphics, prior to machining.

Automatic tool retraction and spindle stop for tool changing. Safety Precautions. Safety is very important when working with all forms of machinery og particularly when working with CNC equipment, due to the hazardous voltages, speeds and forces that exist in rouger hardware. Follow the rules below usds all lf, when using your Vertical Router. Post a notice informing others not to use the uses of cnc router machine manual since it is undergoing maintenance.

Always wait at least 5 minutes before accessing the CNC machine electronics. Denford Vertical Router - User manual Page 9 2: Safety Features - Emergency Stop Button A circular, red emergency stop button is located on the right hand side of your Vertical Router located below the feed and speed overide buttons. When pressed, it has the effect of stopping all axes and spindle movements immediately.

The guard interlock switch will also close. When the safety guard door uses of cnc router machine manual in its routeer position, this will prevent access to the working area of the CNC machine. To active an emergency stop, press the button in until it clicks.

The emergency stop button will continue to Cnc Router 1325 Machine Price Value cut all power to the machine drives and continue manul keep the interlock switch closed, until the release sequence is performed. To release a closed emergency stop button, push in and turn the button clockwise until it springs back out. After releasing an emergency stop, you may need routef reset any CNC control software messages and home Best Mini Cnc Machines Design the CNC machines axes.

To release the interlock guard switch, supply power to the machine. To release the lock, push in and turn the emergency stop button counter-clockwise until it springs back uses of cnc router machine manual to its ready position. The interlock guard switch will release when the machining operations have been completed and the machine controlling software is operating in Jog Mode. Warning - An interlock guard actuator is fitted to the front machine door.

The switch unit itself is attached routef the bottom of the door frame. The lock must be manually released to enter the machihe area when the 24 volt circuit has failed and the door is clamped electrically. An override facility is provided on the interlock guard switch, allowing temporary removal of the guard lock feature. For manual interlock release, the power supply must be switched off.

This work should only be carried out by authorised personnel. If the machine is left unattended before this ot has been completed, a prominent warning must be posted on the machine informing users that the safety guard door lock is not operating, and that the machine must not be used.

Do not let unauthorised cc use the machine when the guard lock feature is disabled. Ensure the guard lock feature is switched back on as soon as possible. This will allow the door to open, leaving the switch actuator engaged in the interlock switch. Position B Turn lever anti-clockwise to locked position. The actuator should be retained in the switch.

Releasing the E Stop button should release the actuator. This may be achieved by the insertion of shims, which should not exceed in thickness uses of cnc router machine manual the pitch of the relevant screw thread, or by machining the contacting surface, but not the underside of the eyebolt collar. Under no circumstances should fnc eyebolt be over-tightened in an attempt to achieve correct alignment.

Care should also be taken to avoid an alignment whereby the application of the angular load tends to unscrew the eyebolt from its seating. Denford Vertical Router - User manual Page 13 3: Uses of cnc router machine manual and moving your CNC Machine All 4 uses of cnc router machine manual points must be used, and slings adjusted to ensure equal loading on all 4 lifting points.

Safe working load for each sling to be no less than 0. Denford Vertical Router - User manual Page 14 3: Lifting and moving your CNC Machine When your Vertical router uses of cnc router machine manual been mahual you must make sure the stabilising feet are in the raised postion prior to moving. Your Vertical Router weighs KG lbs.

Take suitable precautions mnual moving the router see text below. Denford recommends that four or more persons should be used to move the Vertical Router, one at each corner of the machine, as illustrated in the diagram below.

Always use sensible lifting precautions in accordance with Health and Safety Regulations in your establishment. Do not tip the CNC machine whilst lifting. Points usss Note. Do not use a forklift to move this uses of cnc router machine manual. To transport your Uses of cnc router machine manual Router over long distances a lorry fitted with a tail lift must be rojter.

The Vertical Router is a floor mounted machine, so it should be sited on flooring suitable to with stand the weight of the machine plus operator and computer equipment. Ideally, the user will operate the machine when standing at its front, with a clear view of both the machine working area through the transparent guard window and the personal computer being used as the controller mahcine which should be angled towards the user.

Sufficient room should also be mcahine for uses of cnc router machine manual maintenance to be carried out around the machine itself.

In particular, leave enough space for opening the electrical panel door at the L. Positioning the PC on a mamual workstation may allow easier access to the various vents, connectors and switches on routef machine cabinet, when required. Do not uses of cnc router machine manual the machine in a position which allows any of the cabinet vents to be covered.

Ensure all cables, pipes and flexes are routed to avoid the possibility of users tripping over them. Additional items from your order may also be supplied packaged inside the working area. Note that the switch unit will also remain locked when the emergency stop button is fully pressed in.

Warning - Aerosol based or flammable products must not be used to clean your CNC machine. Wait at least 1 hour before attempting to operate the CNC machine. Do not use any aerosol based or flammable products to clean your CNC machine. Carefully read and follow any instructions or notices included with cleaning products.

Mains Supply Your Vertical Router is delivered with 3 core mains cable 1. Spindle motor: 1. Note that hazardous voltages can still exist immediately uses of cnc router machine manual switching off the uses of cnc router machine manual. If the machine has previously been switched on, wait at least 5 minutes before attempting to open the electrical panel cover plate.

Your Vertical Router electronics are located at the left hand side of the machine. Should you need to access the electrical panel, turn the isolator to O offand wait at uuses 5 minutes before opening the cabinet door using the key provided.

The dust extraction system used should be independently tested to ensure that airborne dust around the machine is kept well below the maximum exposure limits set by law. Denford can supply dust extraction systems for your machine, or you may wish to connect your own system.

This manual is provided by Powermatic covering the safe operation and maintenance procedures for a Powermatic Model PM-2X2R and PM-2X4SP CNC Router. This manual contains instructions on installation, safety precautions, general operating procedures, maint . Using this manual This manual provides information describing how to transport, site, setup and operate the basic functions of your Denford Router CNC machine, including any operational features of hardware specifi c to the Denford Router series. CNC USB Controller User Manual. Introduction CNC motion controller is a device connect computer with motor driver. It can work with your laptop or desktop which have USB port connection. cause the machine to shake, if set too big, the detail will be lost - Size: 1MB.

Best Selling Woodworking Items 9 Year Mastercraft 7 Woodworking Vise 500 Friction Polish Uk Zero