It is my poor-man's version of coplector stationary shop dust collection system. Diablo Tools. This is after clogging filter after filter when using it without the dust deputy. Not the best option for small, indoor shops. Kristin Hitchcock is passionate about an array of DIY topics - from blacksmithing to making children's toys. I bought a second one for my woodworking. It is a bit difficult pulling the pail out to empty it and I am still working on a fool proof way to keep the hoses sust the input side slippery plastic but oneida cyclone dust collector 70 than that, I am a happy camper.

It is a bit difficult pulling the pail out to empty it and I am still working on a fool proof way to keep the hoses on the input side slippery plastic but other than that, I am a happy camper.

This Dust Deputy is wonderful. I works great to keep my shop cleaner. It eliminates the need to frequently clean the filter in the shop vac. I can work all day and only need to dump the contents once a day.

Love Love Love Great value at bargain price - I was dubious, but bought a 5 gal pail and top at my big box store, hooked it up in 2 minutes and was completely surprised with the improvement in my shop vac suction without a clogged filter anymore. Just make a 3 to 3. Hooked it in to my planer and it was very impressive seeing its vortex action. I am planning a combo cart to house it with the vac because it readily tips over.

My workaround was putting a drill press vice about 5 lbs and heaviest small item I could do without for awhile into the pail, so that it now strands up to the hose movement without tipping. Removed over sf of tile and thinset.

The DD captured all the chips and dust with barely any dust in the vacuum. Had a pro use it when he ground the surface smooth- he was so impressed he charged me half if I would give him the DD setup. Everyone who saw it in action now wants one, including the new-floor installers. Works good just need to make sure you have a good seal, air tight.

As far as I can tell, This unit uses the same cyclone geometry as one that I've built. Mine cost me approx. What a great device.

I make powder horns and belt sand them with a 60 grit and grit belt. After 6 horns, the shop vac filter is totally clogged. I used the Cyclone for the month of March and when I cleaned the shop vac filter at the end of the month, it looked like I had only used it on one or two horns.

This is great, wish I would have bought one of these years ago. It was pretty easy to mount it to a metal can I already had. Spent more time going to the hardware store to purchase bolts and silicone than actually putting it together.

Great item, wholeheartedly recommend. I love this device. It works great, but I've had to epoxy it back together twice.

Fix that and it will be dynamite! Like all small cyclones, this one is only for use with low-power 2 and less hp vacuums. Any more powerful unit will simply suck the dust from the inlet port straight to the outlet port, and you'll still end up with all the dust in your shop vac and its filter. I easily attached the dust cylclone to a 35 gallon plastic container and I bought the shop vac brand hoses 2.

The cyclone was sealed to the container lid with permatec silicone sealent and the rest is history. I wish I had bought this soonerand I will be buying another one in the future.

Also there was no perceivable dust getting to my shop Oneida Cyclone Dust Collector Uk Quote vac. The dust-deputy does remove most of the dust particles before they reach the dust collector. The plastic is heavy enough to support the vucuum even when the lines are blocked. It does have some distortions in the plastic base from mass production, but these did level out once bolted down to a plywood top, but may not if using a simple plastic lid.

Be sure you plan on building a heavy base or attaching everything to the dust collector. The device and bucket are so light that the weight of the hoses will cause it to tip over frequently if you do not. I have the DD hooked to a small shop vacuum.

It is so efficent that a new filter in the shop vac still looks new after several uses. The ports are tapered to allow various size hoses to be used. I wish that Oneida would include Oneida Cyclone Dust Collector Amazon Fr the copper grounding tape with even the basic DD as that would make grounding it easier. Still a great product! I built one of the carts I saw on Woodsmith Shop to hold my shop vac and the dust deputy. I also added a vacuum switch because I knew if it wasn't automatic, I wouldn't use it.

The cart and the vacuum switch work great. I should have less cleanup to do in the garage. This product goes between the source of dust and your shop vac. It is my poor-man's version of a stationary shop dust collection system. I attach it to my power tools and use it to vacuum my shop floor. This product does what is to me an amazing job of collecting dust.

I keep looking inside my shop vac for dust and it takes a close inspection to see any there. Before adding this product, my shop vac filter would quickly clog up, necessitating removal of the filter and a messy cleaning of the dust from the filter. With such an efficient particle trapping filter, I would have needed to clean the filter even more frequently to keep up the suction.

But with the cyclone, I can go a very long time between filter cleanings. Even then, there is barely any dust on the filter. When the cyclone is attached to a collection bucket such as a 5-gallon paint or drywall container, it is a bit top-heavy. You need to attach it to your shop vac by some means if you want the cyclone roll around with your vac. The manufacturer has some suggested ways to do this such as with a bungee cord or by an auxiliary platform. I highly recommend this product.

I mounted it on a 10 gal metal bucket with a bead of chalk between it and the lid, works great. I'm sure a more air tight plastic bucket would be even better. I'm an brazilian user. The oneida was what I needed. There are good videos about this product that are helpful. I installed it on a "big box" 5 gallon bucket and use my shop vac for suction.

The cyclone works, the shop vac is completely empty. The cyclone is easy to install,works as stated. I bought a Rigid shop vac and installed the cyclone. The vac was new,never seen dust. It still has't!! That is how well the cyclone works. If you want to control the dust in your shop get the cyclone. I used to be stingy about using my festool shop vac for anything other than collecting dust from my sanders, because I didn't want to fill up the bag.

Now I don't have to be. But best of all, with the bag not choking up with dust, I have far better suction. I attached it to a 5 gallon bucket with a wooden spacer and some caulk. It's very effective at keeping most of the sawdust out of the shop vac filter. The plastic bucket tends to tip over, but I'm going to fix that by putting an old brake disk in the bottom. The capacity of this unit is insufficient for the amount of sawdust I generate. The unit is too small in diameter and too short to effectively remove dust from the air.

Static electricity buildup also prevents dust from falling into catch bin, resulting in significant blow-by to my vacuum cleaner. I bought a dust deputy. The unit has no gasket and the local store said that I would have to make my own gasket, they do not have any. I bought I guess when you buy a car the tires might be extra, you need to check witch model you are buying it my not come with them. Part of my garage woodworking shop dust collection.

I use it on my cnc machine to avoid dust in the workshop. I put 4 wheels on my 5 gallon bucket, I had to change the wheels location cause it's top heavy. I've been using this for close to a year now in my shop connected to various power tools. Consequently, the filter on my shop vac stills gets clogged up pretty quick, just like before, with the fine stuff. This is after clogging filter after filter when using it without the dust deputy.

Great product. Nice unit for seperating big stuff before shop vac. Saves the expensive shop vac HEPA filter. Wish it was bigger and took 4 inch hoses. I built my own dust collector using the Dust Deputy. It does everything as advertised. I am happy with the product. I am in the process of doing up a small workshop and I plan to use the cyclone with a shop vac as well as the second stage filter after thein in a fixed system.

Tests to date have been spectacular. Once mounted, this contraption works like a Dyson vac to spool away all the dust and debris from the tool into the bucket below. I saw it on a few online videos, and the thing seemed to work well. In real life with a shop vac, it really does work well! Virtually nothing ended up in the shop vac. I've planed a bunch of boards and there's still nothing in the shop vac.

I ran it with the jointer, nothing in the vac. I chewed through some dusty fir on the table saw, nothing in the vac. I cleaned up the work area afterward, still nothing. A couple nagging issues that I can get over pretty easy. I would have liked to receive a gasket with the DIY kit. As it was, I just used some gasket maker goop, works well The port that connects to the shop vac didn't really fit my particular shop vac A Shop Vac very well.

So I wrapped the spout in blue tape and it fits snug now. A little more taper on this spout would have solved it. The dust deputy works as well as advertised but just like many others have said that's a lot of money for some molded plastic.

The molded plastic unit I received is not flat on the bottom so silicone was necessary, especially when trying to fit it to plywood even with a gasket. In as much as I probably spent just as much with the DIY as I would have with the whole kit I think I have a better finished product by buying higher quality materials than what others have said comes with the deluxe version.

Plus it's customized for my purposes which is what so many seem to have done regardless. Good product, overpriced, not real high quality plastic so be careful with it. I am very happy to have it connected to my shop vacuum to save my bags. It is pleasant to see the cyclone in action to know it is working. I did have some problems connecting the hoses. The fittings seemes an odd size as compared to the vacuum and hoses I have.

I finally settled on flexible plumping couplings and it is working very well. Makes me want to make more sawdust just to watch it work. Works very well as a dust precipitator. Should have gasket with the unit as bolts are not hard to find, but gasket would be a good thing to include. I overcame this by building a deep square box that is weighted down and on wheels for mobility. Also there was no hardware at all with the diy kit,so you have to provide that and I also cut braces from ply wood as the plastic mounting flange looks pretty thin to be tightening bolts against.

I can find nothing wrong with the dust deputy at all not one thing! I cant put into words how happy I am with this dust deputy I mean it I love it I am going to buy a few more. It actually works better than advertised. I have it hooked up to a shop vac with both a bag and a filter. Nothing makes it into the shop vac bag. All the sawdust goes into into the bucket. I have this set up on my chop saw vacuum and it works great.

The vacuum no longer gets full or a clogged filter and never loses suction because of this. Considering getting another one for my regular shop vac. At the price, you should supply a gasket with the unit. Coupled with a good vacuum, this is the answer to sawdust collection. Well, in my hurry to get going, I forgot to put the filter back in the shop vac. I bet I ran that vac for 20 minutes before I found the filter laying on the table.

There was no dust in the air at all. Now after replacing the filter and a full day of sanding, routing, planing, etc, the shop vac is still empty and sucking hard enough to collapse the sides of the 5 gallon bucket I have under the Dust Deputy. Very impressive! It can also damage your tools, especially those with sensitive motors. The only way to avoid these problems is to get an efficient dust collector. While there are many different dust collectors on the market, cyclone dust collectors are about as influential as they get.

They are very large-volume and they can separate heavy chips and fine dust from the air. Some are relatively low-quality. It is essential to choose the best option for your workspace and preference. It comes with one standard canister and one micron canister. Together, they can filter at This is the primary reason we recommend this dust collector so heavily — it can collect practically all the dust in your workspace.

Furthermore, it is not as expensive as most professional-grade options. The majority of large dust collectors are out of the price range for most homeowners. However, this one may be purchasable on the average budget. It also has a polyester spun bond pleated filter, which helps the airflow to remain very high. With that said, this dust collector is much more expensive than most homeowner options. It may be out of budget for some. It just depends on your budget and what you need.

However, this is, without a doubt the best model on the market. Pros Captures Check Latest Price For those on a budget, the Big Horn is the best cyclone dust collector for the money. It is very inexpensive compared to other options. Even those on a tight budget should be able to afford this. However, with that low price, this dust collector is very cheaply made.

It is a bucket and a lot of tubing. It is not made to last very long and is not very efficient. It is a budget dust collector if there ever was one! With that said, this dust collector is extremely easy to use. You do need a shop-vac, but you probably already have one of those lying around.

This is only really suitable for small shops, though, and homeowners. However, it is so cheap that you can purchase it again if it breaks. Plus, it also has a warranty. It is more expensive than most other options on the market. The two-stage filtration system has more working cubic feet per minute CFM than comparable horsepower HP. The filtration system is mostly the reason it is so much more powerful than other options. The heavy debris is pulled down into the collection bin before the debris hits the filter.

Then, the filter removes the smaller stuff. The direct mounted filter eliminates the common inefficiencies associated with tubing. Again, this helps the airflow stay high. The gallon drum that the heavy debris falls in a gallon drum is far more extensive than most other options currently on the market. If you spend a lot of time DIYing or are a professional, this is a huge plus.

The casters are also independent, so you can empty them quickly when they do get full. Pros 2-stage filtration system gallon drum Direct-mounted filter Independent casters Cons Expensive 4. It is a step down from our premium option. It is a bit cheaper, but also lower-quality. In our minds, if your budget prevents you from buying our premium option, your money is best spent on our overall option instead.

Similar to our last option, this one has a two-stage separation system. The larger particles like wood chips are put into the collection drum before they hit the filter.

Then, the filter handles the smaller particles. As you imagine, this helps the filter last longer and also makes it work better. Clogs are very uncommon because of this system as well. This system captures particles down to 1 micron. However, it may be enough for most small shops and homeowners. One small negative about this machine is that users say it is a bit noisy. The engine makes a weird whistling noise, which gets annoying very quickly.

Oneida Dust Deputy Cyclone Kit. The size of the dust it can remove is unknown — that stat is not provided by the company. This machine does not clog very often, which is always an excellent addition. We found this simple system very durable, which is not something we expected to say!

It can be used many times without breaking. Plus, it is so cheap that you can usually afford to purchase it again if you need to. The efficient design allows you to use it on wet and dry materials as well.

It is versatile and can be used with a variety of hoses and fittings. Plus, it is made in America if that is a metric that is important to you.

Check Latest Price While the Grizzly Industrial G looks professional and well-put-together, we found it a bit disappointing. It has a gallon capacity, which is a little smaller than other options. However, it is also a bit cheaper than comparative dust collectors. It has a filtration capability of down to 1 micron. However, it is decent. Most homeowners will find it suitable for their purposes.

It also has a wireless remote control, which you may find helpful in some situations. However, in general, we find this feature to be overvalued. The collection drum is straightforward to empty thanks to the quick-release handle, and the crank handle provides maximum airflow. We did find this dust collector to be a little less durable than other options. However, this also comes at a lower price.

Check Latest Price There is one significant downside of the Shop Fox W is that it can only filter out particles that are 2 microns and larger. The smaller particles do the most damage, so this is not good in the least.

This is one of the significant reasons this dust collector is rated so low on our list. The filter is pleated for extra durability, which is an excellent feature.

The viewing window is excellent, as it allows you to take the guesswork out of whether or not the drum is empty or not. This system is also easy to empty, so that is a plus!

The assembly of this machine is complicated, though. The bolts are very hard to get in, and the directions are sometimes unclear. It is also deafening, according to those that purchased it. Not the best option for small, indoor shops. Your money is better spent elsewhere, like in one of the other units we discussed earlier in this article.

It has a drum capacity of 20 gallons. This is smaller than most but is about average for the price point. It may even be big enough for some professional shops.

Sharpening V Carving Tools Crack Dresser Drawer Hardware Pulls Off Netgear Modem Router Sign In 01