Woodwork shops are one of the obvious candidates for an air filtration system jet air filtration system remote knowledge there are many others that can benefit jet air filtration system remote knowledge a filtration system that removes dust and other particles from the air inside your shop. This unit was the first in the industry with remote control, timer and three speeds which have quickly become the fltration standard. Most woodworking shops will use dust extraction systems that are connected to the machine — usually dust collection bags attached to a vacuum system. It has a powerful 1A 0. Installing an air filtration system is not complicated. When it comes to air volume, your Cubic Feet per Minute CFM rating for the circulation fan is important in relation to the size of your shop.

The Jet AFS offers excellent filtration with a 5-micron outer filter and 1-micron inner filter. These filters can be cleaned several times before they need to be replaced.

This air filtration system is as easy and convenient to use as the best of them. It has a remote control and timer settings for 2, 4 and 8 hours. It also has carrying handles and eyes for hanging installation. It can be used as a standing unit with solid rubber feet. For hard working conditions, this machine is worth paying extra for and their 5-year warranty certainly beats all the others. The Powertec AF is an affordable and robust air filtration unit and is perfect for the home workshop, medium-duty professional workshop or for contractors that who will be using it on site.

Air filtration is on a par with all the others, it has two easy to change filters — one 5-micron filter and a 1-micron filter.

The powerful fan has three speed settings for , , or CFM. It has a similar remote control to the others and has timer settings for 1, 2, or 4 hours. The system is contained in a sturdy steel housing with 4 hanging eyes and a handle for easy transportation. The Powertec AF weighs It runs very quietly, which is something most users have commented on.

This is a quality item and matches the other two smaller air filtration system in every aspect. It would be a tough call to say which one is the best.

Your decision will probably boil down to brand preference or the price. The standard Powertec warranty agreement stipulates a period of 1-year for the warranty and a day money back guarantee. The Shop Fox is in the same league as the other two cheaper options and is also a robust little machine in a tough steel housing. It has basically the same performance as the other two, albeit from a slightly less powerful 0. The filters work in the same way with a 5-micron outer filter and a 1-micron inner filter.

It has a remote control and has timer settings for 1, 2, or 4 hours. It also has hanging hooks and a carrying handle like the others. Changing or cleaning the filters is just as easy as any of the others and replacement filters are also easy to come by.

It has a 2-year warranty — the same as what you get for the WEN and better than the Powertec 1-year warranty. In a workshop that uses cutting, grinding and sanding equipment, dust in the air is inevitable. This is most common in woodworking shops where large amounts of sawdust and woodchips are released into the air as we work.

Shops that deal with stone have a bigger problem because many stone products release minute particles that contain crystalline silicone and the health effects from inhaling silicates is particularly dangerous. This is also true for contractors who cut masonry and stone on site.

The main effects of dust or sawdust in the air is that they cause damage to the respiratory system, resulting from particles collecting in the lungs. Breathing in any amount of dust over a prolonged period can cause irreparable damage to your lungs. Other health problems can be scratching of the eyes and, in some cases, skin irritation.

Most woodworking shops will use dust extraction systems that are connected to the machine — usually dust collection bags attached to a vacuum system. These systems are very effective and remove a lot of the wood-chips and sawdust released by the tools that we use. However, there is always dust that is not collected by a conventional dust extraction system. Small particles of 5-micron or less become airborne very easily and these particles are the most dangerous — causing the most damage to our lungs.

They are too small to see and will go by unnoticed unless they are in large volumes. This causes a fine mist in the air. Because most of the fine dust is not collected by regular dust extraction systems, a secondary air filtration system is of great importance. Not only are particles in the air a cause of health problems, but they can also have a negative effect when applying finishes and paint to the final product.

In the US, indoor air quality regulations are a legal requirement for employers in two states — New Jersey and California. Despite the lack of federal legislation for air quality in the workplace, labor law does state that all workers have the right to a safe and healthy working environment.

By default, this means that if the air in the workplace poses a health risk to your employees, you are in contravention of the law — no matter what the state laws are. This is why any workshop that produces dust needs an air filtration system that is capable of removing dangerous particles from the air. This means that it needs to have the correct filters, normally removing particles of up to 1-micron in size. To give you an idea of what this is, 1 micron is 0.

For most shops, a 1-micron filtration system is fine for solid matter particles. An HEPA filtration system will remove particles of 0. Your workshop air filtration system needs to clean the air in the shop times per hour. This means that the entire volume air in the area needs to pass through the air filtration system at least six times every hour.

An air filtration system uses a fan to draw air through the filters and release it back into the atmosphere as clean air without any harmful particles. To do this you need to calculate the volume of your shop Length X Width X Height , you then multiply this by the number of times you want the air to be cleaned and divide your final answer by Installing an air filtration system is not complicated. Larger units may require a V circuit and may also require heavier mountings as these will be heavier machines.

Generally, people prefer to hang the air filtration system from the ceiling and most of the smaller models have eyes or hooks to make this easy to do.

Placing the filtration system too close to a wall or workbench will obstruct the airflow. JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service.

In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area call New Products. Replacement Parts. Mortisers Grinders Scroll Saws Accessories.

Stay Connected Be the first to know about new products, events and special offers.

Wood Turning Tools For Sale In Ireland King Rockler Plantation Shutter Jig Watermelon Wood Work Bench For Sale Ny