Maybe they will add it in the future, but currently it is not 66. The quick-set blades of the JET Guidr are similar to the standard classic straight knives found on many jointers — 3 jet 6 inch jointer planer guide knives that need to be set at the same height. New Products. This jet 6 inch jointer planer guide it easier to reach in and comfortably change the height gkide the tables. This is a major downside to the 6-inch models, because you will have to rip the boards down to less than 6 inches, and then glue them back together. Combined with potential cost savings of less frequent replacements, the difference becomes even smaller. We will take a look at each of the four models to determine how they are different, which ones may be better or worse, and which machine may be right for your specific situation.

The jointers have extra long cast iron infeed and outfeed tables. Longer tables help significantly with keeping long workpieces perfectly flat. The Jet 6 Inch Jointer Planer Queue tables are mounted to the frame with a classic dovetail also called wedge-bed system, which means they slide at an angle over a dovetail shaped extrusion. This is a classic design already used for many years throughout the industry. There is a minor disadvantage to this dovetail design, which is that it can start to wear slightly over time, making it harder to set the two tables in one plane.

However, this wear will take a long time and even then it is questionable how big an impact it will have. However, if you do not want to take this risk, take a look at jointers with a parallelogram base design.

For both the infeed and outfeed table there is a chrome handwheel mounted on the front , rather than below the tables. This makes it easier to reach in and comfortably change the height of the tables. On some jointers or jointer planer combos the fence can be a bit flimsy, and manufacturers seem to think of it as an easy component to save costs on. However, if you want to joint accurate degree edges on your boards which is really an essential feature of a jointer you need a solid fence. Luckily JET provides sturdy fences which are secured well in the middle.

The fence has 3 positive stops for 45 degrees left and right, and 90 degrees. This allows you to much quicker get the right setting, whether you want to just create a straight edge or joint miters. The guard used on the machines is a classic American-style spring-loaded pork-chop cutterhead guard that moves out of the way when you push against it with your workpiece.

It will depend on your personal preference whether this is a good or a bad thing compared to a Euro-style blade guard for example.

The machine also has a rabbeting ledge , which is not frequently used by most users, but it is a nice additional feature to have. However, you may find that you need to keep your blades sharp to maintain enough power to joint hard and difficult boards. On to the differences then. How do they Jet 6 Inch Jointer Planer 5g work and is the upgrade worth it? The quick-set blades of the JET JJ-6CSDX are similar to the standard classic straight knives found on many jointers — 3 straight knives that need to be set at the same height.

Because each blade has identical holes, if you swap out the blades it will set itself in exactly the same position as the previous blade. The result is that you only need to set your blades to the right height once. This is a great time and annoyance saver. Each blade has 2 sharp edges, so you can flip it over when one side gets dull. Helical or spiral cutterheads have many different carbide cutter inserts instead of three straight knives.

These cutters are positioned in a spiral shape around the cutterhead. Each cutter can be loosened individually and has four sharp sides. This system has a several useful advantages: Jointing makes less noise, the jointed surface looks better, the cutters are easier to replace when damaged or dull, and last much longer.

Because each cutter can be loosened and replaced individually, if you hit some metal, you only need to replace one cutter instead of the entire blade. Also, because they have four sides, you can just turn them 90 degrees when they get dull. This allows them to last much longer than classic straight knives. Helical Heads are also better at dealing with difficult grain and generally give better results.

We would still recommend the upgrade, because as mentioned before, there are so many advantages to helical cutterheads. The price difference, even if pretty high in percentage terms, in absolute terms is quite small, especially compared to other machines where it can cost times as much to upgrade to a helical head.

Combined with potential cost savings of less frequent replacements, the difference becomes even smaller. This makes the upgrade well worth it in our opinion. JET also makes two 8-inch jointers, which again are identical except for the style of the cutterhead. Unlike the standard 6-inch model, the 8-inch standard model does not have quick-change knives. This means you will have to set up the knives in the classic way every time you change them. The two 8-inch models are very similar to the 6-inch ones and have all the same features.

The only design difference is that the handwheels to raise and lower the tables are located underneath rather than on the front.

Mortisers Grinders Scroll Saws Accessories. Stay Connected Be the first to know about new products, events and special offers. Roll over Image to Zoom. Stock No. Contact An Expert. Description If you are looking for a Jointer that squares your wood, every time; look no further.

Table Height from Floor In. Adjustable Roller Stand

Wooden Carpenters Mallet For Sale Router Bit Profile Match 6 Oak Knoll Road Mendham Nj Apk