RYOBI BD OPERATOR'S MANUAL Pdf Download | ManualsLib

Properly cared for, it will give you years of rugged, trouble-free performance. If you use your machine properly and only for what it is intended, you will enjoy years of safe, reliable service.

Please fill out and return the Warranty Registration Card so we can be of future service to you. Thank you again for buying Ryobi tools. It means attention!!! Your safety is involved. Before beginning tool operation, ryobi belt and disc sander manual co wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.

Wear hearing protection during extended periods of manial. Safe operation of this power tool requires that you read and understand this operator's manual and all labels affixed to the tool. Safety is a combination dizc common sense, staying alert, and knowing how your tool works. Use clamps or a vise dsic hold the work when practical. Learn its applications and limitations as well as the potential hazards.

Keep proper footing and balance at all times. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. When not in use, before servicing, or when changing attachments, all tools ryobi belt and disc sander manual co be disconnected. Get in the habit - before turning on tool - that hex keys and adjusting wrenches are removed from tool.

Be sure switch is off when plugging in any tool. Cluttered work areas and work benches invite accidents. DO NOT leave tools or pieces of wood on the machine while it is in operation.

The use of improper accessories may cause risk of injury. Do not use power tools near gasoline or other flammable liquids, in damp or wet locations, or expose them to rain.

Keep the work area well lighted. Serious injury could occur if the tool is tipped or if the sanding belt or disc is unintentionally contacted. Before using the tool, a guard or other part that Ryobi 370w Belt And Disc Sander Manual Code is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for roybi of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect operation.

A guard or other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury. Do not force the tool or attachment to do a job for which it was not designed for.

Use it only the way it was intended. Do not leave tool until it comes to a complete stop. Make sure your extension cord is in good condition. Use only a cord heavy enough to carry the current your product will draw.

An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. A wire gage ryobj A. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Never yank the cord to disconnect it from the receptacle. Keep the cord from heat, oil, and sharp edges. All visitors should wear safety anv and be kept a safe distance ryobi belt and disc sander manual co work area. Do not let visitors contact tool or extension cord while operating. Fo hands away from the work area. Restrain any loose clothing, jewelry, long hair, etc. Always use a clean cloth when cleaning.

Never use brake fluids, gasoline, petroleum-based ryobi belt and disc sander manual co, or any solvents to clean tool. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry that could get caught and draw you into moving parts.

Non-slip footwear is recommended. Wear protective covering over long hair. Watch what you are doing and use common sense. Do not operate ryobi belt and disc sander manual co when you are tired. Do not rush. Everyday eyeglasses have only impact resistant lenses; they are not safety glasses. Have defective switches replaced by an authorized anc center. Wear a face or dust mask if the operation is dusty. Use only Ryobi identical replacement parts.

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Refer to them frequently and use to instruct other users. If you loan someone this tool, loan them these instructions also. The safety symbols, and the explanations with them, deserve your careful attention and understanding.

The safety warnings do not by themselves eliminate any danger. The instructions or warnings ssnder give are not substitutes for proper accident prevention measures. May be used in conjunction with other symbols or pictographs. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment. When servicing, use only identical Ryobi replacement parts.

Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc. Failure to comply can result in accidents involving fire, amnual shock, or serious personal injury. Save this operator's manual and review frequently for continuing safe operation and instructing others who may use this tool.

Contact with the sanding disc can result in serious personal injury. When using a power tool at a considerable distance from the power source, use an extension cord heavy enough Ryobi Belt And Disc Sander Manual Uni to carry the current that the tool will draw. An undersized extension cord will cause a drop in line voltage, resulting rjobi a loss of power and causing the motor to overheat.

Use the chart provided dic to determine the minimum wire size required roybi an extension cord. Only round jacketed cords listed by Underwriter's Laboratories UL should be used. Up to 50 feet 16 Ryobi belt and disc sander manual co working with the tool outdoors, use an extension cord that is designed for outside use. This is indicated by sandfr letters WA on the cord's jacket.

Ryobi belt and disc sander manual co using an extension cord, inspect it for loose or exposed wires and cut or worn insulation.

Repair or replace a damaged or worn cord immediately. It should be connected to a power supply that is volts, 60 Hz. If the machine does not operate when plugged into an outlet, double check the power supply. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug.

The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided. If it will not ryobi belt and disc sander manual co the ryobi belt and disc sander manual co, have the proper outlet installed by a qualified electrician. Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded. This tool is intended for use on a circuit that has an outlet like the one shown in Figure 1.

It also has a grounding pin like the one shown. CAUTION: Keep the cord away from the work area and position the cord so that it will not be caught on material, tools, or other objects during operation. Remember that a careless fraction of a second is sufficient to inflict severe injury.

Failure to heed this warning could result in serious personal injury. Any damaged or missing part should be replaced before attempting to use the tool. Note: If any parts are damaged or missing, do not attempt to plug in the power cord ryobi belt and disc sander Ryobi Belt And Disc Sander Manual Zip Code manual co turn the switch on until the damaged or missing parts are obtained and are installed correctly.

Assemble according to the instructions on the following pages. Failure to comply could result in accidental starting and possible serious injury.

On the smooth side of the sanding belt, there is a directional arrow.

Manual Details W Belt & Disc Sander - RBDSG. ryobi-RBDSG-manualpdf Published: Filesize: MB × +. View and Download Ryobi BE operator's manual online. Ryobi Belt Sander OPERATOR'S MANUAL BE BE Ryobi Belt And Disc Sander Manual Analysis sander pdf manual download. Aug 18,  · This RYOBI 4 in. x 36 in. Belt/Disc Sander is a combination belt and disc sander that delivers volts of power to help provide efficient operation. The cast-iron base helps keep the sander stable during use so you can apply the desired amount of pressure and achieve consistent results/5(75).

Insider Carpentry Bench Wings 51 Wood Router Machine 500