metal cabinet handle lock ✅. A small key-less lock for cabinets, drawers, etc. All the 4 parts are to be made separately and then assembled. The handle might need some glue to fix on the rod.  Replacement/improvement on cabinet lock receptacle (have no idea what its actually called, its the part that mounts to the cabinet and the lock arm slides in to) Print Settings Printer: Tronxy PM Rafts: Doesn't Matter Supports: No Resolution.3 Child Safety Cabinet Lock. thingiverse.  I needed more keys to work with the magnetic child safety cabinet locks we got. These are designed to work with this magnet: www.- It was Baby Cabinet Safety Lock. Material of lock tongue: Zinc alloy. Working voltage: DC8V~DC24V(standard:Locked-rotor current: mA@12V. Manner of working: Independently(Push-to-close,electronic release). Response time: less than 20ms. Working temperature: 20℃ ~ +65℃. Working humidity: 10% ~ 90%RH. Working life: times. Sample: Accepted. Nintendo Switch Joycon Replacement - Fix your broken RIGHT Analog Joy-Con Controller.  How to Fix Your Joy-Con Not Locking | Nintendo Switch Metal Buckle Upgrade. Repairing a Broken Filing Cabinet Lock. I acquired an antique secretary desk Popular Articles. Toggle navigation subscribe. Now, you should be able to locate the hexagonal nut that holds the old locking mechanism on place. Filing cabinet lock.

It is advisable to wear protective goggles and gloves when replacing or fixing components. Although this is a quick and simple process, there is a definite risk of swarf flying around when dealing with metal so protection for your eyes and hands is vital. First, take the entire lockable drawer out of the filing cabinet.

If the drawer is locked in position, you may need to unscrew the top of the cabinet Replacement Metal Cabinet Locks Area to access the inside. Now, you should be able to locate the hexagonal nut that holds the old locking mechanism on place. This is usually found at the rear central position of the filing cabinet. Look for an oval indentation in the hexagonal nut.

The indent is the point at which you should position the tip of your punch. Using the punch and hammer, you will need to tap the hexagonal nut firmly to loosen it. You may have to do this quite a few times until the old lock works itself free.

New lock kits always come supplied with keys. Insert a key into your new lock mechanism. Turn the key until the locking tag at the other end of the mechanism faces in an upward direction. With the bolt in the correct position, insert the replacement mechanism into the knocked out hole. Your lock kit will have come with a new hexagonal nut. Slide this over the thread of the barrel to the rear of the cabinet door and screw into place until it is finger tight.

The locking tag should still be facing in either an easterly or westerly direction. Ensure that the new hexagonal nut is screwed into position tightly on the barrel of the new locking mechanism to finish.

This can be achieved by using the punch and hammer on the oval indentation. A few light taps should secure the nut into place. The drawer can be slid back into place and your filing cabinet should have a fully functioning lock. If you had to remove the cabinet top, screw it back on before putting the filing cabinet back into position.

We welcome your comments and suggestions. All information is provided "AS IS. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use.

View our Privacy Policy here. Toggle navigation subscribe. How to Fix the Lock on a Filing Cabinet. Written by Doityourself Staff. What You'll Need. Lock kit and keys. Step 1: Safety First Before getting started, think about your personal safety. Share this article.

This article will show you how to repair a filing cabinet lock as well as how to replace one. When a lock malfunctions it will usually cause the filing cabinet to jam, disallowing you access.

If you cannot open the drawer, you cannot possibly fix the filing cabinet lock. One way to open a filing cabinet lock, assuming the filing cabinet is not too large or too full, is to turn it upside down. Many locks operate on gravity and turning the cabinet upside down and wiggling the drawer can cause the pins to fall and unlocking the drawer.

This can also fix the lock if the cause was a simple jam. You can also open the drawer by sliding a screwdriver between the top of the drawer and the cabinet. Push up on the screwdriver near the center to create leverage to pop the lip of the top of the filing cabinet over the metal latch. This can, however, damage the filing cabinet. The final way to open a locked filing cabinet is to use a drill.

Set the filing cabinet flush against a wall to act as a brace. Place the drill bit in the center of the filing cabinet lock and begin to drill. The power and torque from the drill will cause the lock to pop off from inside. This damages the lock and it will need to be replaced. The metal latch can become bent and cause the filing cabinet lock to not function properly.

Use the screwdriver and remove the screws holding it in place. The lock will easily pop off from the drawer. Place the lock in the vice and use the wrench to bend the metal latch back to position. Place the lock back where it belongs. If pins become bent you will need to remove the lock as well as open the lock casing. Bent pins are easy to spot and are easy to bend back using pliers.

It is important to use gentle pressure in very small increments. Put the casing back together and use the key to try the lock before putting it back on the filing cabinet drawer. When the filing cabinet door is open you can easily remove the filing Replacement Metal Cabinet Locks Python cabinet lock.

Use the old lock as a visual aid to purchase a lock that is the same diameter. Slide it into the hole of the previous lock and screw in place. We welcome your comments and suggestions.

All information is provided "AS IS. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here.

Toggle navigation subscribe. Repairing a Broken Filing Cabinet Lock. Written by Doityourself Staff.

Dust Collection Systems For Woodworking Shops In China Dust Removal System Te Drs 6 A T1 Express Lowes Power Tools Router Do It Yourself Wood Wall Name