Typically a board hommade be roughed in with a scrub plane, one designed to remove a lot of material quickly, before the final surface was achieved and the board face is flattened with a joiner plane. Hence the latter is not level, but has, in places, steps homemade jointer plane meaning have been worn to an inclined plane. Two clicks install ». Attach both these plywood pieces using of screws. Origin of jointer plane First recorded homrmade — Close Menu.

The blades are adjusted to match the height and pitch of the outfeed table. The work piece to be planed flat is placed on the infeed table and passed over the cutter blade head to the outfeed table, with care taken to maintain a constant feed speed and downward pressure. The cutter head contains two or more knives blades which are honed to a very sharp edge.

The blades are arranged radially in the cylindrical cutter head such that their cutting edges protrude from the cutter head so that they will come into contact with the workpiece board being cut as the cutter head spins.

The cutter blades cut into the board in the direction opposite to the feed. Here, I make a benchtop Bailey No 8 Jointer Plane Meaning jointer from electric planner and plywood. This benchtop jointer is very accurate and very useful for woodworking workshop.

First step is to cut all plywood pieces needed for this benchtop jointer. After that, make slots on two plywood pieces two sides for planer support by using of jigsaw machine as shown in the image.

Drill 64mm holes on both these plywood pieces using of 64mm hole saw cutter. Attach both these plywood pieces using of screws. Attach 2 nos. Make slots on two plywood pieces two sides of the jointer using of drill bit and square file. Attach infeed and outfeed plywood pieces using of 6 nos. A jointer plane may also be used to flatten the face of a board.

Its long length is designed to 'ride over' the undulations of an uneven surface, skimming off the peaks, gradually creating a flat surface.

In thicknessing or preparing rough stock, the jointer plane is usually preceded by the jack plane and followed by the smoothing plane. Jointer planes are typically 20 to 24 inches to mm long. There is also a shorter version of the jointer plane known as the fore plane which is around 18 inches mm long.

This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors see full disclaimer. Donate to Wikimedia. All translations of jointer plane. A windows pop-into of information full-content of Sensagent triggered by double-clicking any word on your webpage.

Give contextual explanation and translation from your sites! Try here or get the code. With a SensagentBox , visitors to your site can access reliable information on over 5 million pages provided by Sensagent. Choose the design that fits your site. Please, email us to describe your idea. Lettris is a curious tetris-clone game where all the bricks have the same square shape but different content. A workbench is preferred , but any flat table that you are able to use clamps with will work.

A woodworking vise is the preferred option to clamping the piece from the sides so that the entire top surface is free to plane. An important part of using a jointer plane is the motion used to run the tool over the wood board you are flattening. Two hands are used with the tool, so the natural thought is that you can simply move the tool back and forth or side to side.

This could work, but will not be very efficient. Be sure to note the direction of the grain, and plan to plane as much as possible along that same line. Grip the back handle with your rear hand, making sure that your index finger does not try to find a place to rest on the iron or chip breaker. Pressing against these can knock the lateral adjustment out of whack. Make sure your forearm is in a straight line behind the jointer plane following the direction of the sole.

With the front hand, hold onto the tote, or front handle, with a comfortable strong grip. Lean forward, putting the strength and stability of your body behind it. Push from the back hand while pressing down with the front hand, keeping the sole as flat on the surface as possible. Forward strokes should be straight, while bringing the jointing plane back to its original position is often easier to do in a half-arc. On a wide, long surface, you can perform this action in a rapid, but smooth, motion.

For narrow edges and ends of planks, use a slow, steady motion. Since there is very little material surface to keep the sole flat, it is easy to tilt to the sides if moving too quickly.

Carpentry Shop Tools Trading Co Ltd Emmert Woodworking Vise Line