Jul 27,  · the finish is: First coat 1/2 mineral, 1/2 salad bowl. Second, the same. 3rd, light sand with , then the same. I just did the sanding part with grit, felt that was safe. Now I can see sanding scratches in the final finish. This has happened to me on other pieces also. I don’t get how i could possibly be messing this up. Anyone? Sep 20,  · Pour some oil in the bowl. Use a small rag or paper towel to smear the oil all over the inside and outside until the wood seems saturated. Let it sit for fifteen minutes and then use a dry rag to wipe dry. Fifteen minutes later wipe dry again. Nov 28,  · After the Behlen's I switched to General Finish product. www.- If you want a soft easily replaced finish, this would be an oil or wax. For the wax, I like George's Woodcraft Salad Bowl Finish You Club House Wax. www.-
Sep 20,  · Pour some oil in the bowl. Use a small rag or paper towel to smear the oil all Woodcraft Salad Bowl Finish 100 over the inside and outside until the wood seems saturated. Let it sit for fifteen minutes and then use a dry rag to wipe dry. Fifteen minutes later wipe dry again. Apr 16,  · Apply Salad Bowl Finish very lightly, spread it quickly and plan on 6 to 10 very thin coats sometimes with a light sanding in between coats three and six as needed. A good finish takes time but it is worth it for a great result. I always plan on 12 coats with a 24 hour drying time between coats/5(). Jul 27,  · the finish is: First coat 1/2 mineral, 1/2 salad bowl. Second, the same. 3rd, light sand with , then the same. I just did the sanding part with grit, felt that was safe. Now I can see sanding scratches in the final finish. This has happened to me on other pieces also. I don’t get how i could possibly be messing this up. Anyone?

Pocket Hole Jig Tips Review Belt And Disc Sander Attachment