When solid wood furniture is exposed to extreme atmospheric conditions, it will expand or contract and may split along the grain of the wood. Business and Management. But it will be easier and less expensive than veneer furniture. Product Directory General. Finger Jointers Finishing Equip.

This designation refers to the process of attaching the laminate to the substrate core. With HPL products, the laminate is adhered using 1, to 1, pounds of pressure per square inch psi. In addition, the product is heated to temperatures between to degrees Fahrenheit and adhesives are used to secure everything in place. On the other hand, LPL products do not use adhesives and are heated to a higher temperature of to degrees Fahrenheit.

Also, as the name implies, only to psi are used. Both processes produce a durable product, but low-pressure laminates tend to cost less because they are less expensive to manufacture. Ultimately, laminate furniture offers a more affordable alternative to veneer and solid wood options. While there are some trade-offs when it comes to durability, these products may be the best choice for your office and your budget.

Creating veneer furniture is actually a centuries-old woodworking technique been used to create unique surfaces that can include complicated inlays of different types of wood. Some of the biggest names in furniture have used different versions of veneering techniques to produce museum-quality pieces that can come with impressive price tags.

Today, these same techniques are used to produce a wide variety of office furniture and upscale decorative pieces. For consumers looking for cheaper alternatives to solid wood, veneer furniture can also offer an attractive price point.

When it comes to office furniture that is manufactured on a larger scale, veneer products are typically constructed by gluing thin strips of wood that are about 3mm thick onto a substrate. Core materials range from particleboard and MDF to plywood and wood.

Less expensive furniture options will use a less resilient core material. When it comes to office furniture, solid wood is the most expensive and often desirable option. Wood furniture conveys a sense of sophistication and authority that can be used to send a message to visiting clients.

If you have a flexible budget and are looking for office solutions that will last for years to come, wood may be the best material for your needs. There tend to be a lot of assumptions and myths floating around about the quality of different laminate and veneer products. The truth is that they offer many benefits that may make them a more attractive alternative to expensive pieces of wood furniture.

It all depends on your priorities and your budget. Your email address will not be published. Help Get help from our experts Chat Live. Contact Us. Shop BTOD. Veneer vs. Solid Wood. Surface Comparison: Laminate vs. Laminate vs. Solid Wood What is Laminate? High Pressure vs.

High-Pressure Vs. Pros of Laminate Products Laminate furniture is a popular choice for offices and for good reason. Laminate products are flame retardant and some have antibacterial properties. This makes them a great choice for high traffic areas like waiting rooms. They are easy to clean. All you have to do is dust the furniture with a damp, microfiber cloth on a regular basis in order to maintain your furniture. Compared to solid wood options, laminate furniture is much more stain and scratch-resistant.

The manufacturing process creates an incredibly durable product that can withstand a demanding work environment. When it comes to affordability, laminate furniture offers great value. You can get more for your money and enjoy stylish pieces that will make a statement.

What is Wood Veneer? How is Veneer Office Furniture Constructed? Pros of Veneer Furniture A cost-effective option that provides the look and feel of wood. Can be sanded and refinished. While you have to be careful about removing too much material, you can give your veneer furniture an updated look.

Whether you want to buff out some scratches and stains or completely change the color of the piece, veneer offers a versatile option. While there is no way to match the durability of solid wood, veneer furniture can certainly hold its own and is more resistant to warping than wood. For this reason, veneer panels are often incorporated into pieces that also include solid wood components. Unique designs. Using veneer allows a craftsman to match grains and create an entire surface from one tree.

This is virtually impossible with solid wood. In addition, veneers offer the opportunity to use rare specimens and types of wood for truly unique furniture. Easy maintenance. All you have to do is regularly dust your furniture with a damp microfiber cloth and use furniture polish on occasion to maintain luster.

Ultimately, veneer products can be beautiful, affordable and durable, but they will never be solid wood. However, veneers are often used for high-end furniture pieces and can be more costly than solid wood. Veneering is actually an ancient art that dates back to ancient Egyptian times when veneers were used on their furniture and sarcophagi. In woodworking, veneer refers to thin slices of wood that are glued and pressed onto core panels which can be used for a variety of purposes, such as doors, tops and side panels for cabinets, wood flooring and more.

Veneer is created either by "peeling" the trunk of a tree or by slicing large rectangular blocks of wood. The appearance of the grain and figure in wood comes from slicing through the growth rings of a tree and its appearance varies depending on the angle at which the wood is sliced. In solid wood furniture, all exposed parts are made of the same species of all-natural wood — the exposed pieces will not contain plywood or particle board.

Solid wood furniture is durable and easy to repair. Water marks? Obviously, the worse the damage, the more expensive it will be to repair. But it will be easier and less expensive than veneer furniture. It might split. When solid wood furniture is exposed to extreme atmospheric conditions, it will expand or contract and may split along the grain of the wood. Sometimes furniture is constructed using a floating case system, in which table and case-piece surfaces are attached using brackets or elongated holes for screws to slide.

This enables furniture to respond to environmental changes without damage. To prevent splitting, it is important to avoid exposing solid wood furniture to strong sunlight or direct heat sources. Veneer furniture is constructed by gluing thin layers of wood veneers together with the grain at right layers over a thick core.

With this crisscross design, the chances of splitting or cracking is reduced. The glue used in the process is the same strong, waterproof adhesive used in aircraft and marine construction, so the end result creates a product that is stronger than the natural wood.

The best and most interesting logs are cut into veneer — typically this is an economic decision. Sellers and veneer makers can make more money from a high quality log that is sliced into veneer than they can from sawing it into boards. And certain cuts, such as burls, are structurally unsound as a solid piece of wood. These beautiful woods can rarely be utilized unless they're sliced into veneer. With solid wood, timber is typically sawn into Wood Veneer Supplies Canada News 1" thick boards. This process produces 32 veneer surfaces for every 1 that is made into a board and, with no wood wasted as sawdust, another 8 sheets are gained where the saw blade would have gone.

That's 40 surfaces of wood veneer for every 1 board of solid wood. It creates new design possibilities. Since veneer is so thin and is glued to a stable substrate, it allows designs and arrangements of the wood that would fail in solid wood.

Solid wood, even kiln-dried, expands and contracts as the seasons change from summer to winter and back to summer again. For example, a radiant table top would be impossible to create with solid lumber because the seams would open in the winter and swell tightly shut in the summer. Since veneer is glued to a stable substrate, it produces surfaces that are not prone to warp, splitting or seasonal movement. It uses substrates. Plywood and medium density fiberboard are the substrates used in with veneers.

The use of these lower quality trees creates a market for landowners with these trees and contributes to better forests over time because the trees remaining grow better and faster with less competition for resources.

This is more of a challenge for the builder than the buyer. During construction, if you sand through a layer of veneer in preparation for finishing it is impossible to repair and frequently involves a redesign or making a difficult repair which could be difficult to hide. However, once the piece is completed the thinness of the veneer is of no concern. It can blister, delaminate or peel back at the edges.

To prevent this, the furniture must be created with proper construction materials and techniques. Early in the 20th century, much mass-produced, low quality veneer furniture was made that haunts furniture makers to this day. Construction techniques and materials have improved considerably in the past few decades to the point where blistering, delaminating and peeling is no longer a legitimate concern when purchasing high quality furniture.

If you would like to learn more and view our selection of solid wood and high-end wood veneer furniture, visit our showroom or pick a product and click on the revolve live chat button to speak with one of our fabulous designers!

Free Woodworking Plans Cremation Urn Group Modern Furniture Build Plans Database Hand Saw For Sale Olx 3d