Q: Where should I store green turning stock? A: Properly sealed green turning stock can be stored in a variety of locations. The best storage areas will have three things: light to moderate air flow, temperatures of degrees, and a moderate amount of humidity. Air flow is important to control the rate of moisture loss. Aug 28,  · Storing Green Wood for Carving A reader asks, "What’s the best way to store the log before working it, and how long do I have to wait for it to be ready for carving?" By David Fisher Aug 28, I really enjoyed Dave Fisher’s video workshop on carving a greenwood bowl. In the video, Dave makes his creation from a cherry log. To be safe, you should store wood blanks, before turning them, for as long as possible in an atmosphere close to the intended final environment of the finished turning. This will ensure the minimum movement or warping in the finished piece and prevent splits. You should allow about 4 weeks for 1" thick timber.
The rule Drying Green Wood For Turning Zone of thumb is to turn to a thickness 1/10th of the finished diameter. So a 10" bowl would be rough turned to 1" wall thickness. Then pack the rough turned bowl in shavings in a paper bag, and set it aside to dry in a controlled fashion. Every couple of weeks, check for . Latex paint is a cheap effective sealer. Pick a location with good airflow; you want the wood to dry and not rot. Outside is fine but you will need to protect it from the weather. Sticker and stack. upon a base that will keep the bottom layer off the ground by 6 inches and support the boards every inches. Q: Where should I store green turning stock? A: Properly sealed green turning stock can be stored in a variety of locations. The best storage areas will have three things: light to moderate air flow, temperatures of degrees, and a moderate amount of humidity. Air flow is important to control the rate of moisture loss.

Jet Planes Waiting In The Air To Be Refuelled Youtube What Is Jointer Machine New Woodworking Tools For 2021 30