I have soft closing drawers in my kitchen. A drawer started making a sort of ping or click when I open it and I noticed it wasn't closing all the way   I figured out how to take the drawer out. I found the gas pistons at the rear of the gliders and discovered that the left piston is working properly but the right one is not. It is not relatching at the top when you open the drawer. Ie, you close the drawer and the piston draws back and then when you open the drawer there is a little catch that attaches to the piston and draws it back forward to reset it in place, but right before it recatches, it springs back. This is obviously the ping I've been hearing. I've tried several times moving the slider very slowly to see if I can get it. Installing soft-close drawer slides is a simple DIY project that only requires a few tools. You will need to clear out the drawer and remove any existing hardware first. New slides are made up of 2   Screw 1 piece onto the drawer and the other piece onto the cabinet to set up the slide. Then, put your drawer in place to enjoy a safer, quieter home. Steps. Part 1 of 3: Clearing and Measuring the Drawer. {"smallUrl":"https:\/\/www.- \/images\/thumb\/0\/02\/Install-Soft-Close-Drawer-Slides-StepVersionjpg\/vpx-Install-Soft-Close-Drawer-Slides-StepVersionjpg","bigUrl":"\/images\/thumb\/0\/. How to install Blum Tandem plus Blumotion drawer tracks on older face frame cabinets. View all posts by Cathy Rabeler. Hettich makes high quality cabinetry hardware - a bit more up market than Blum as I understand it. When you invest money in kitchen equipment or furniture with drawers, you expect them to last a long time and operate as they should. The best part, it offers you, like I said while mentioning the sizes, a full-extension opening. However, if a drawer is on its slides properly but is not moving smoothly or soft close drawer slides hard to open jpg stuck, you likely need to lubricate both it and soides slides. The most unique part?

I had to basically tug at the drawer the entire time to get it to open and push extremely hard to close. It almost felt there there was a resistance band on it when I try to open and then something resisting me closing it.

I thought I was being wimpy so I had my husband try - he has found that it was really, really hard to open AND close. Does your cabinetmaker have any displays in his shop that you can go check out to compare with what you have? Any "references" he can give for you to check out to make sure that they're "supposed" to be like that? I doubt it. There's a problem with the glides most likely and he doesn't want to waste his time fixing it.

But thats just my opinion. Look for the 'made in china' stamp. Please post photos so that we can debunk the cabinet maker's claim of 'resistance'.

This is becoming a recurring problem. One more comment- our blum self close, soft close with 50 lbs worth of stuff inside can be opened with the pull of a finger. Travisalfrey, could you share with us some of the other brands that are as good as, or better than blum?

That doesn't sound like they're working correctly at all. I have Kraftmaid cabinets, so I don't have Blum brand glides - but my drawers open and close fine. Perhaps not as nicely as Blums I've never used Blums, so I can't compare , but they open easily, and close themselves after I give them a reasonable "push".

Now, this is only after my cabinets were replaced. The carpenter had originally installed the cabinets badly, putting the boxes out of square - then the drawers didn't work well at all. Once the cabs were replaced we had to reorder them! That makes no sense. When you test out cabinets at a store or display, there is nothing in them!

The soft-close drawers I've seen are still soft-close when there's nothing in them. Cabinet maker has agreed to replace all the drawer slides to blum.

He said he will need to remake all the drawer boxes to accommodate the new slides. Does this sound right? Can anyone tell me if the blum slides are bottom mounted or side mounted? The current crappy slides are side mounted and they take up alot of space, therefore making my drawer boxes smaller.

BTW, thanks for everyones support on this. All the information that was provided in response to my post helped my case when I had to talk to my cabinet maker today.

My newly installed cabinets have bottom-mounted Blum glides. There is an initial resistance when opening the drawer, but my 6 and 8 year old daughters can do it without a problem. You do have to give them a little tug, so it feels a little strange never having had this kind of glide before , but not difficult.

Hettich makes high quality cabinetry hardware - a bit more up market than Blum as I understand it. Side mount full extension and soft close are different than Blumotion which are undermounted ball bearing glides if I have my terminology right.

With undermounted ball bearing glides your drawers will be wider and it will have a very different feel. How deep are your cabinets? I think hettich is the best made. I also like the motion of the Accuride but Accuride has a difference clearance than blum or hettich so they are not interchangable.

I use the accurides on inset jobs because they are the most adjustable. How can I tell if the Blum soft close, self close will fit? This is the wrong question to be asking.

You simply TELL the custom cabinetry maker what you want an he goes and makes it in the size necessary to fit your space. This should be part of the specifications that are given to the cabinet shop. This is the glide that's mounted inside the cabinet. They are the only kind I use and work get when installed properly.

The drawers have to be made to specific specifications. You can't change out cheap side-mounted slides without making all new drawers. May I join in on this discussion with my dilemma? My cabinets were installed this week and Accuride slides are totally dis-functional!

If you push the drawers softly, they don't close; if you push them with enough force to close completely they bounce open. IMO, they are unacceptable.

They are really easy to open, and pretty much close themselves without banging if I get them close enough they kind of "suck themselves in". The side-mount glides on the Rev A Shelf? One more voice in the discussion.

We are building out our kitchen and have many Blum Tandem soft close units. They work smooth and correctly. BUT, we have had 3 of the catches as pictured above but with a small white plastic tab for bottom screw install break. They have all broken in the same spot, on the plastic that I described My vendor did replace 2 so far, waiting on the third.

Here is a link that might be useful: our kitchen project. I just renovated my Kitchen and got the same story from my cabinet maker. My drawer slides are Hardware Concept Inc from Florida. I am in Jupiter FL. I contacted the company and they said that I should not be having these issues with the drawers and that it was my cabinet maker who has installed the product incorrectly.

The company has done nothing to help correct the problem and my cabinet maker insists that people in Florida don't use soft close because they are hard to open and need to be loaded in order to work properly. I never have heard such crap before. I asked the cabinet maker to use Blumotion because it is a fabulous product I have in my other home. All drawer sizes work beautifully and have for 4 years. He said the Hardware Concept product was as good if not better so I agreed to go with the product he wanted.

Little did I know he had no idea how to install the product. They have been installed twice and still do not work properly. I am left with with drawers that do not work the way they are suppose to work.

Your cabinet maker is giving you the run-around! I am in the Jupiter area also and have had soft close drawers and cabinets for 5 plus years and they work perfectly. We just renovated our kitchen and my new Blumotion work flawlessly also. If the cabinet maker has tried to install your glides correctly twice, and they still don't work properly, I would call the manufacturer and have them recommend a competent installer to fix them for you.

I just picked up a coffee table that I Soft Close Drawer Slides Hard To Open List had made from a customer to fix this very problem- I had used self closing side mount slides due to the fact that the drawers are so small in height Blumotion wouldn't work. It is being used by an older person and I agree that it is hard to pull the drawer open. The work great the other way. This is the first time this has happened to my in over 35 years and thousands of drawer installs.

No one should have to fight to get their drawer open. Yes and it is our responsibility as pros to communicate and do a great show and tell with the customer. Note: Although the home owner is the final customer--I did this for a designer here in Scottsdale Arizona-she being a pro has given me time to fix before the home owner sees it and moves in.

That is a great designer to plan in her project management risks and small fixes in her timeline. I have just had them installed came from Lowes and have the same issue.

But I DO have a solution for you. In the very back of the mounted guide rail on each side of the drawer you will see a gray plastic mechanism. Do this on both guide rails both sides.

Now, with the gray mechanisms released, the drawers will slide smoothly and easily back and forth on the rails. BUT, do not push the drawer back hard enough to make then re-engage with the gray mechanisms - just let them come to rest at the back.

If you push too hard, you will re-engage the gray mechanisms. This solves the hard pulling problem, but you lose the soft-close feature. Try it and see! But maybe your advice will help someone else finding the thread I just got new drawers and some feel a little hard to open.

How exactly should I clean the tracks? Damp cloth? Sign In. Join as a Pro. Send a Houzz Gift Card! Outdoor Rugs. Spring Front Door Decor.

Outdoor Lounge Furniture. Alfresco Dining Sale. Free Shipping. Outdoor Storage and Organizers. Home Office Furniture and Storage. Storage Furniture. Email Save Comment Featured Answer. Like 3 Save. Sort by: Oldest. Newest Oldest. Like 1 Save. Like Save. Related Discussions We need help deciding on inset cabinets vs. We renovated a house and put in inset drawers, cabinets. I had no idea of the vast amount of cabinet space I would lose doing Soft Close Drawer Slides Hard To Open Example this.

My cabinet workroom talked me into it, largely because this is what most magazines are showcasing. I was totally shocked when they were installed. While I have a lot of drawers and doors, I have to puzzle piece my cookware and containers in order for the drawer to close. I wish I had known what I was giving up. Visually, it isn't worth it. I vote for function over form in this case. Lift upward when the drawer is pulled out nearly all the way in order to completely detach it from the slides.

Examine the wood runners to determine the cause of the problem. If the runners or tracks are overly worn down or broken, they might need to be replaced. However, if they are only slightly rough but in good shape, use fine-grit sandpaper to smooth them out. If there is anything stuck in the tracks or obstructing the area, remove the debris.

Apply lubrication. You can use spray-dry lubricant, which is the preferred method, or wax. Simply rubbing a candle on the runners should be enough to get things working smoothly again. Open and close it a few times to see if your repair job was successful. When you invest money in kitchen equipment or furniture with drawers, you expect them to last a long time and operate as they should. Keeping your drawers opening smoothly can be a challenge, but with the right knowledge and products, you can easily fix stuck or stiff drawers by greasing drawer slides properly.

Broadly speaking, there are friction slides and ones on rails. Wooden drawer slides tend to be either grooved at the sides or on the bottom of a drawer frame. For the rail-based drawer slides, there are a variety available and a few you would probably recognize.

Check out more drawer- Soft Close Drawer Slides Hard To Open Kit slide terms and definitions here, or just review our drawer-slide guide. Undermount slides: Undermount slide drawers attach to the sides of the cabinet, while the underside of the drawer body has the locking devices.

The slides are not visible, and because there are slides on both sides, weight is distributed evenly. Center-mount slides: Center-mount drawers have slides that attach directly under the center of the drawer. There is only one slide, which makes them easy to install, but this can also restrict the height of the drawer as well as the weight it can hold.

Side-mount slides: Side-mount drawer slides are attached horizontally to the drawer and the cabinet body. This type of slide is ideal where there is limited horizontal space, as they only require less than a fourth of an inch of area to install. Side-mount slides are often used on high-quality cabinetry because they are located out of sight.

Hettich Drawer Slides Hinges. Sticky Drawer? Lubricating metal and ball-bearing drawer slides Materials needed: lubricant white lithium grease is the optimal choice and a damp cloth Remove the drawer. Clean up any excess lubricant.

Wooden drawer-slide lubricants If you are experiencing friction caused by wood-on-wood contact between the drawer and the wood drawer slide—a problem that arises often in older furniture and kitchen cabinets—there are a number Soft Close Drawer Slides Hard To Open Zero of different products you can use for lubrication to remedy the problem. Plastic or metal drawer-slide lubricants If the drawer slides are plastic or metal, you can still use the recommended lubricants for wood drawers like wax or tape , but your best bet would be to purchase and apply white lithium grease.

Lubricating wooden drawer slides Materials needed: lubricant spray-dry lubricant, wax, or tape , fine-grit sandpaper optional Remove the drawer by sliding it straight out. Drawer types Broadly speaking, there are friction slides and ones on rails. Comment on Sticky Drawer? Blog Articles.

Wood Carving Kit Near Me Kr Jet Planes Of The Third Reich Meaning Woodworking Projects With Hand Tools Under Washer Drawer 20