Any raw wood or backed veneer. Titan DX™. Contact cement. Veneer scraper. Backed veneer only.  I use the X-Press veneer glue in my shop for all of wood to wood joints. The darker color and easier sandability over yellow glue makes it a great choice. Ultra-Cat can be used for wood to wood bonding and is especially useful for bent laminations because it dries rock-hard and minimizes spring back. Applying wood veneer with contact cement is an acceptable method when other methods aren’t available or practical. By following these established practices and recommendations you will have good success using contact cement with paperbacked, wood backed and phenolic resin backed wood veneer. Do not use contact cement to adhere raw or unbacked wood veneers. The contact cement doesn't come off once it is set and will tear up everything if you get the veneer positioned wrong and try to adjust it. Images in this review. 4 people found this helpful.  The pictures show the project in each phase. I used gel contact cement for the veneer application and wood glue and brads for the raised routered pieces. Then they were stained and a clear poly over the top. Images in this review.
Do not use contact cement to adhere raw or unbacked wood veneers. Download a Printable PDF Preparation. When you receive your veneer you must allow time for it to acclimate to your environment prior to use. To accomplish Raw Wood Veneer Contact Cement You this it’s necessary to remove the veneer from the packaging and lay it flat for a minimum of 48 hours up to 4 days. Wood Veneer Application Using Contact Cement. Apply Veneer with Contact Cement There are a number of ways to apply wood veneer to a substrate. If you prefer a fast, convenient method that doesn't require a lot of special equipment, good results can be achieved with contact cement and a few hand tools.

Johnson Lathe Tools 2021 Real Tung Oil 50ml