The-pocket-Hole Jig features 2 drill guides, a removable spacer and thickness stops for 1/2 in., 3/4 in. and /2 in. material that give the versatility you need to /5(). May 16,  · Set the correct pocket depth. For strongest joints, set the stop collar according to your jig's instructions. The pilot point should stop 1⁄8 " from the workpiece's end or edge, as shown below. Check this each time you use the jig to avoid accidentally drilling too deep. Pocket-hole Jig for do-it-yourselves. Positioning sliders allow you to easily adjust within 9 depth settings. Two hardened-steel Kreg drill bit guides feature a lifetime warranty. Depth-collar gauge is molded into the case for handy reference. Durable Jig body /5(). May 12,  · You could Pocket Hole Jig Depth Js offer additional support by drilling a third hole at the correct setting and using the 2 1/2" screw. The 1 1/2" and the 1 1/4" share the same marking due to the additional 1/2" of screw when you jump up from 1 3/8". In order to compensate for this additional 1/2", the pocket hole has to . Jan 19,  · Adjust the jig setting on your jig Pocket Hole Jig Drill Bit Depth In and the depth collar on the drill Trend Pocket Hole Jig Drill Bit Rate bit to the “jig setting” indicated by the chart. In the same box you will find the screw length. Just make sure not to place the pocket hole too close to the outside corner or the screw/pocket hole could go outside the edge of the frame. Reply. Wooster The-pocket-Hole Jig features 2 drill guides, a removable spacer and thickness stops for 1/2 in., 3/4 in. and /2 in. material that give the versatility you need to /5().

Japanese Pull Saw Melbourne Beginner Outdoor Woodworking Projects