Colors The colors shown are for reference purposes only. Get Inspired Take hold of inspiration. Nate and Jeremiah: Save My House 11pm 10c. See application instructions above. After you have reached your desired look, apply a coat of water-based polyurethane to protect the finished surface. How to Use Gel Stain: Apply Tempersture After you have reached your desired look, apply a coat of water-based polyurethane to protect the finished surface.

Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator NIOSH approved and proper containment and cleanup.

For ease of staining and finishing, it is recommended that you finish the door before installation. Helpful Hints: On metal doors, use masking tape to mask off areas where sections meet.

Let the section dry to the touch before working on a section next to it. This ensures a clean, straight edge where panels meet. DANGER: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.

If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection NIOSH approved or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. For skin contact, wash thoroughly with soap and water.

In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. You might encounter two problems with using gel stains. When wiping off the gel stain, it is very difficult to get the stain out of any nooks or crannies that might exist on your project. For instance, when applying to a table, you may have difficulty getting the stain out of the junction where the legs or rails meet the tabletop.

If the stain is allowed to remain and dry at this junction, it will be noticeable and more difficult to deal with later. As such, be careful not to over-apply the stain to such intersections. Additionally, if there are any defects in the stock that haven't been filled before staining, the gel stain will be difficult to wipe out of the defect and will appear a different, likely unwelcome, color than the rest of the project after it dries. Be sure to have adequate ventilation when working with gel stains, as they contain materials that give off toxic fumes.

Also make certain to discard the cloth that Gel Stain Application Temperature 10 you use properly, as the gel stain is quite flammable. Gel stain works on most surfaces from wooden to metal, and even painted surfaces can be gel stained. Unlike traditional oil-and-water-based stains, gel stain is very easy to apply by wiping it on with a brush versus having to rub it in like most stains.

On the downside, gel stain is not available in as many color options as traditional stains. As with all stains, test it on a piece of scrap wood or in an inconspicuous area before you start.

Unfinished furniture is ready to go, while furniture with an existing finish will need to be lightly sanded. If staining kitchen cabinets, degrease them with rinse-free, tri-sodium phosphate. To prep the surface, give it a quick wipe down with a fine-grit sandpaper. Then, wipe the surface with a damp cloth Gel Stain Application Temperature Use to remove any dust.

First, protect your work area Minwax Gel Stain Application 10 with a plastic tarp or drop cloth. Remove any knobs or drawers from the piece you'll be staining. Next, use a screwdriver to easily open the container. Put on your gloves, and dip the foam brush into the stain. Wipe the stain evenly across the surface Image 1. The first coat should be thick. Then, apply the stain to any drawers or knobs using the same method Image 2. Jalynn Baker. Wipe the stain evenly across the surface.

Photo By: Jalynn Baker. Remove any excess or globs, especially from crevices, with a rag. This step is very important to ensure an even finish. The stain will retain a thick, pudding-like consistency and dry on the top of the surface. In dry environments, let the first coat cure for 24 hours. This step is very important to ensure an even finished outcome.

Unlike traditional stains, the thick product sits atop the surface being stained like paint. The gel stain will absorb slightly into unfinished wood but not into non-porous surfaces.

Ideally, according to most manufacturer's guidelines, you should wait 24 hours between each coat. Expect to have to apply coats until the finish is even or opaque. After you have reached your desired Gel Stain Application Temperature In Python look, apply a coat of water-based polyurethane to protect the finished surface.

Privacy Policy.

Log Joinery Tools Build Your Own Climbing Frame Kit Solution Best Combination Square Woodworking Ltd