Architectural details are kept sp Grab the full project tutorial and step-by-step instructions from here instructables. You can ajd disassemble and rebuild projects made with these materials. Complete project instructions here rkblack. January 17, at pm. The home is located above a small secluded rocky cove and has been designed so that it almost completely blends in with its surroundings.

The thatched roof is contrasted by wood with a black finish. Inside the home, the furnishings have been The home, which has a concrete structure, is softened by the use of lianas or climbing vines. The vines hide the concrete, creating a tropical paradise, and a fresh green filter. Living spaces, which hover above the mini-garden, provide the feeling of walking on bridges.

A roller shutter system has been included to create the separation between outside and ins Located in Beverly Hills, the Gardenhouse seamlessly blends indoors and outdoors through balconies, paved courtyards, planted areas, and a large external 6,square-foot living wall.

The building includes a total of 16 residences, made up of five Sky Villas, three Row Houses, and eight Garden Flats, while the living wall was designed by landscape architect Scott Hut The existing house didn't provide enough rooms, nor the quality of spaces that the clients needed.

The proposed design sought to improve the flow between spaces and bring coherency to house. Construction works included the demolition of the existing single-storey rear extension and its replacement with a two-storey extension to open up the ground floor living area and cr A curved double-height atrium runs lengthwise from front to back doors, creating an interior courtyard that vertically connects the common areas on the first and second floors.

Defined by a large picture window and a curving wall, the courtyard offers an informal multi-purpose area where residents can relax and their children can play.

The design of the home balances They decided to leave the heart and center of Tel Aviv, along with their cat and two dogs, in favor of one of the quieter northern neighborhoods of the city.

Before the renovation, the apartment was extremely old fashioned and the interior needed to be adjusted to the lifestyle of the young family, which requested an easy-going and warm atmosphere and a modern space fill We approached the design by reinterpreting classic Cape Cod architecture, including asymmetrical pitched roofs, shingle siding, and shed dormers, while expressing more modern interiors, essentially threading the needle between old and new.

The interior lets the outdoors in with large expanses of frameless windows and sliding glass doors. Architectural details are kept sp Revealed in an interview on Sunday with Le Journal du Dimanche, Hidalgo said that the makeover will transform the entire thoroughfare into "an extraordinary garden" by Using a proposal drawn up by French studio PCA-Stream, this will be achieved by closing off half of the avenue's eight-lane highway to traffic and introducing pockets of greenery. The aim is to The 1,metre-long park was built on the site of the runway of Longhua Airport, which was Shanghai's only civilian airport until and closed in The square-metre cafe, which nestles amongst offices and apartment buildings, was commissioned by a group of young locals to offer the community respite from fast-paced city life.

Shenzhen studio Various Associates used wood as the primary material for the cafe to contrast with its concrete surroundings, helping to establish the cafe as a sanctuary.

Search amongst 8, projects. Brand, model, keywords Architecture and design projects. More information. New apartments bring sustainable architecture to the Upper West Side.

Studio Novas Architecture has designed the renovation of a penthouse in Beer-sheva, Israel, that includes custom-designed elements throughout. Five years later, Kadeau called upon OEO Studio again to update the space, integrating new tactile materials and warm color palettes around some of the original elements.

Amazon has unveiled proposed development plans for the second phase of its Arlington, Virginia headquarters. The client of Wall House procured a parcel of land across the street from his home as a parking lot for his vehicles. ADS was approached to provide for a garage structure with staff quarters above. Given its simple program, ADS convinced the client to use this opportunity for doing a lot more and think of how it could give back to the community.

Aedas has recently completed the iconic metres Hengqin International Financial Centre tower, which stands at the estuary of the Pearl River and overlooking Macau just across the waters. The spirally rising volume invokes the Chinese myth of flood dragons emerging from the sea — a perfect metaphor for the strength and power of the region. The windows being super high-tech and modern in their presence were meant to disappear against the verdant view.

The project, called Chalet Blanc, was born from the idea of a young couple who decided to build a small sustainable chalet at the foot of the Cervino. Text description provided by the architects.

Moynihan Train Hall expands the Pennsylvania Station complex with a ,square-foot rail hub in the landmark James A. A DIY pull up bar is a great addition to a home gym. You just need an afternoon and a few basic materials to construct a pull up bar.

Plus, you can save a lot of money by building your own. We will look at a few DIY pull up bar projects for inspiration before diving into the step-by-step instructions. Most of these projects incorporate galvanized pipe and Kee Klamp fittings into the design, which helps reduce the overall cost of the project. Charles created this free-standing pull up bar as he was training for a World Record Chin Up competition.

A crossfit gym in Saint Augustine, Florida constructed this multi-person pull up bar with galvanized pipe and Kee Klamp fittings. This bar is mounted to the wall with Flange fittings for additional support. We did some research and found Simplified Building and decided to go with the Kee Klamp system.

Simplified Building offered great support and tech advice and the system was up in less than two days and is working great! Brian built this pull up station for the rehab room at his physical therapy office.

Brain consulted with our design team before ordering the materials for this project. There are no leftover pieces, and everything fits as it should. This door-frame pull-up bar fits perfectly into the space without needing to be mounted. This is a great option for dorm rooms or apartments. You will need to measure your door frame before designing your pull up bar to know what amount of space you are working with. Our design team can help you figure out the exact pipe and Kee Klamp fittings you will need to create a similar door-frame project.

Chris built this four-position ceiling-mounted pull up bar for his garage. The variety of hand-grips allows Chris to perform a few different exercises. Use this bar as inspiration when you are creating your own pull up bar. Feel free to browse our selection of Kee Klamp fittings for some additional inspiration for the unique elements you can add to your own pull up bar.

As you can see from the projects above, galvanized pipe and Kee Klamp fittings are some of the best materials for a DIY pull up bar. In a few cases, including the ceiling-mounted pull up bar, you might also need wood planks for the design.

Overall, galvanized pipe and Kee Kamp fittings are great options because they are affordable and easy to use.

The two hooks are looped together. To install the hooks the directions recommend using a pair of pliers as shown above. The hook is pushed into the hole and stays in place with a friction fit on the hook barbs. I found it difficult to do and ultimately Easy Wood Projects To Build And Sell You the shutters are a bit difficult to operate with this design.

For my shutters I chose to hang them from the window jamb using 3 simple hinges per shutter. The shutters look amazing and they work just like I had hoped. As you can see the shutters look amazing and they match my shop really well. When I want some light I can easily open the louvers to let it in. They look great, the blue prints were spot on and the entire process of ordering the materials was very easy. It took about 6 hours to build the pair and the costs were substantially less than buying custom wood shutters.

This cost includes the investment of the jigs and bits. I'm full time builder for a large construction company in New Hampshire. I run their design-build division that specializes in custom homes, commercial design-build projects and sub-divisions. I'm also a licensed civil and structural engineer with extensive experience in civil and structural design and home construction. My hope is that I can share my experience in the home construction, home improvement and home renovation profession with other builders and home owners.

Please feel free to contact me if you have any questions, suggestions or you'd like to inquire about advertising on this site. All posts by Todd ». Search for more articles here.

Enter keywords like, 'insulation' or 'kitchens' etc to find your topic. I like this article, but I have 29 windows that I want to build plantation blinds for instead of buying them.

I know my way around the house and tools diy. Iam needing to know what are the proper tools that I need to build some nice shutters. I have time on my hands. Good luck. Todd thanks for your input. Can you recommend any brands of tools,table saw,router and router bits. I know that there is a wide range of prices and brands. I already have drills and miter saw,drill press and band saw. Thanks for your time. This is the main one I use in my shop. With that info I can make a few recommendations.

What material did you use for the control arm? My preference would not be to install a middle rail and have one long control arm. The software specs out all the pieces for fitting the control arm but nothing on the arm itself. Curious on how you approached it. I Easy Wood Projects To Build And Sell Apk built my frames from pine including the control arm. Frank, I was just wondering if you could tell me the exact width of your stiles and rails. Lowes and other hardware stores only sell.

Just wanted to know if this was what you used? Thank you! Todd, thanks for the article and video. I am curious about how much time in hours it took to build the shutters? John — It took me about 4 hours to build a pair. After doing it once, I could probably reduce that in half or more, especially if I had things set up to mass cut all the materials. Like anything, the original setup and figuring out all the details takes some time.

Great how to article. I am tempted to buy the jig set but, I am hesitant because I wNt to know if the jigs are built to last or for a single use. Definitely quality stuff that will last. Todd, I just built my 1st pair of shutters. They fit into the window opening, when dry fit. However, when glued they are too wide in the middle. My stiles are 52 inches. Gluing the rails to the stiles seems to have made the stiles bow in the middle.

Maybe this is why a middle rail is recommended beyond 48 inches. Todd, have attempted plantation shutters on 4 of my windows using damaged shutters that were being replaced.

All had to be resized and reframed. Came out better than I anticipated.

Build A Frame For Canvas Art Kit Makita Rp2301fcx Test Intarsia Woodworking Projects Pdf Free Images