Start with a piece of plywood (ours was scrap from our shed roof last summer) about 3×4 feet Screw strips of 2×2 to the underside of each edge with 1 1/2 inch deck screws To build the base, cut a 2×6 into (4) inch squares. Layer each one on top of the other, attaching each one with more screws (he used 3 inch deck screws here). DIY Balance Board Step 1: Materials. I had some 3/4" FSC-certified plywood leftover from another project, and picked up the softball for Step 2: Cutting the Disc. I made the disc as large as the plywood scrap (in). The Tool Library already had the circle Step 3: Cutting a Socket for the.
DIY Balance Board Step 1: Materials. I had some 3/4" FSC-certified plywood leftover from another project, and picked up the softball for Step 2: Cutting the Disc. I made the disc as large as the plywood scrap (in). The Tool Library already had the circle Step 3: Cutting a Socket for the. Start with a piece of plywood (ours was scrap from our shed roof last summer) about 3×4 feet Screw strips of 2×2 to the underside of each edge with 1 1/2 inch deck screws To build the base, cut a 2×6 into (4) inch squares. Layer each one on top of the other, attaching each one with more screws (he used 3 inch deck screws here).

Change Dining Room Table Legs Case Netgear Router Sign Up Js Learn Quran Word By Word App