Wooden Rebound Game : 11 Steps - Instructables

There are lots of commercial rebounders out there we own this onebut all of them remove a lot of pace from the ball.

This is fine and quite appropriate for many drills, but to work on catching fast throws the best target is one that sends the ball back sharply i. For that, you need a hard, diy wood volleyball rebounder keys, angled surface and serious mass, reboundfr can be achieved if you have a huge tree handy.

We were lucky enough to salvage two rounds from such a colossus when our neighbors had their year old Douglas Fir felled by the city it had signs of rot. Here's how I turned one into a lacrosse rebounder. Bonus: it's almost totally silent in use. Get yourself the biggest chunk of wood you can find. It needs to be massive and roughly flat. You'll get it properly flat in a later step.

Diy wood volleyball rebounder keys trunk was over 3' in diameter. I have lots of stuff in my garage, including some caster wheels, and I used these along with some recycled wood to make a trolley rebounderr my router.

The idea was to have the router at a fixed height that I could move around over the wwood, skimming a small amount off all the high bits until eventually the whole thing was perfectly flat.

If diy wood volleyball rebounder keys ball is coming rocketing back off the stump, you want the bounce to be true. It's easy to mount a router into a temporary surface - just remove the screws on the face, and use it as a template to cut holes into whatever surface you want the router in. The frame was joined together with deck screws for easy dismantling.

Mine was a fair bit bigger than it needed to be, but I was disinclined diy wood volleyball rebounder keys cut any of volleybwll wood for a one-use purpose like this. Once I finished the routing I disassembled it all and put the wood back in my lumber rack OK, with the exception of the short end-pieces. For a diy wood volleyball rebounder keys levelling jig for logs, check out seamster's excellent instructable on the subject.

This part is messy and will take a while, and you really want the log to be as flat as possible before you begin. The two faces don't need to be oeys, so use wedges volleybalo make it level. Use the plunge feature on the router to progressively lower the bit. If your log is sufficiently un-flat that the travel of your router doesn't get the whole thing, you will have to lower the frame you did assemble it with screws, didn't you?

I did three passes removing about 2 mm at a time. The first pass just removed the highest peaks, the second removed material from about one third of riy surface, and the final pass covered nearly the whole thing. I then ran over the ksys surface again with the hand planer set to remove about the smallest amount of material I could set it to, and it was pretty smooth after that.

I forgot to take any photos during the routing process, I got distracted by the volleybal process of making so diy wood volleyball rebounder keys sawdust. I just used a square bit in my router, but ideally for this sort of task you should use a surfacing bit instead. This makes woov angle of attack adjustable. I plan to slap some clear coat on the front. Also be conscious Diy Wood Volleyball Rebounder Rebounderz of the fact the ball is being returned at high speed, so be aware also of what is behind the thrower.

Hits on edges can rebound erratically. You should probably wear protective gear volleybzll practicing and don't throw while other people are aroundso volleybalk diy wood volleyball rebounder keys above is not setting a great example By makendo Instagram makend0 Follow. More by the author:. About: Analog maker dabbling in digital manufacture More About makendo ».

Did you make this erbounder Share it with us! I Made It! Reply Upvote.

Rear Mount Socket For Drawer Slides File Lie Nielsen Jointer Plane Review Error Wood Designing Curving 3d Machine You Wood Whisperer Salad Bowl Finish Off