For the beach house or aquatic-themed room, this beautiful, simple and easy-to-make driftwood frame is perfect. View in gallery Of course, sometimes the best design option is also the easiest one to make and the most common so check out these DIY rustic mirrors from shantychic. Reply Sarah Loeffler August 27, at pm Love this!! In order for our frame to lay flat on the mirror you will need to cut out a small space for those clamps. You may also like. From there, simply measure, change to the opposite mitre angle, and cut again. The tutorial specifies pipes of the same size, but for some added fun, you may want diy wood mirror frame ideas 03 pick a few different circumference sizes of PVC pipes to make them a little more unique.

Ok so there are about a thousand different tutorials online for DIY mirror frames so naturally, I decided to write a quick Instructable for mine. My house had the standard builder mirrors and I wanted to jazz them up a bit without spending a fortune. You do need a few supplies Dremel with sanding attachment Optional - as pictured I used this to route out a small space for the mirror clamps. You know the old adage If you do it right, most standard bathroom mirrors can be entirely framed with just two pieces of 8' trim including the one I linked in the previous step.

Measure from the outside to the outside of the mirror and then cut the outside of the angle to that length. My standard mirror size was 30" wide by 36" tall. The first cut will be simply to mitre the trim. Naturally, when making a square frame, the easiest way is to set the mitre cut to 45 degrees. This also gives you straight seems straight with respect to the corners of the mirror.

There is one thing to remember when cutting the trim Unlike a 2x4 or similar piece of wood, the trim is thinner on one side than the other, meaning you cannot simply flip the piece of trim over. See the pictures demonstrating this with a power mitre saw.

Once you make the first, cut you will have the 45 degree edge. Measure from the very point of that edge and mark where the point on the other side would be.

Rotate your direction of cut, and mitre the opposite side. Then we measured down the board, and marked it at 5. We then used a straight edge to draw a line through the corner of the board. We knew if sides a and b were the same length, it would ensure that angles A and B would be 45 degrees. Next we cut 45 degree angles on the shorter side to line up with with the longer sides while measuring the width of the mirror. Then we cut the other shorter side with the exact same measurements.

Finally, cut the bottoms off on the longer sides to match the length of their mirror. Add a generous strip of Liquid Nails glue to the edge of each side one at a time. After you glue the side, immediately use the staple gun on the back side of the frame to pop in about 10 staples. Any color stain will do. I used Minwax Special Walnut which is a darker stain, because I wanted to pull out the knots in the wood. I applied using a foam brush, then I let the color sit for about a minute.

Then I wiped off the excess stain using a rag. To seal the wood, use a polycrylic finish. The good news is that it also dries fairly quickly. Flip the frame over on the reverse side and using the Liquid Nails, place glue on the outer edge of the wooden frame. Once you place the mirror on top of the wooden frame, use your weights to place on top once again. This will hold down the mirror to the frame to make sure it dries securely.

Rather than a plain old mirror, I now feel like our bedroom has a statement piece which totally transforms the look of the entire room. While this DIY project took a few days to complete, the overall process was pretty simple. If you have any questions about the process, please ask. This post may contain affiliate links. Please read my disclosure policy here.

Lauren I love it! The results are stunning, and the process is easier than you think. With marbling being all the rage, in many colors, this DIY project fits the bill. No one will ever guess that these mirror frames are actually metal placemats.

You may think making a mosaic mirror like this one is a lot of work. Give a small mirror some extra pizzaz by surrounding it with colorful beads. Check your jewelry box for unwanted beaded goods to use. Update a plain mirror frame with colorful fabric scraps and some mod podge. Turn a plastic mirror into a luxe room feature with paint. This method will give you a faux patina look.

Are you as inspired as I am to update some mirrors with these fun DIY mirror frame techniques? Use wood, paint, fabric scraps, or thrifted goods to create a unique mirror frame that makes a statement. Your email address will not be published. Save my name, email, and website in this browser for the next time I comment.

Learn How. Basket to Mirror Frame Turn a basket into a dimensional mirror frame in just minutes. DIY Sunburst Mirror Make a sunburst mirror frame using an embroidery hoop, a hula hoop, and some twine.

Wooden Sunburst Mirror Use wooden paint stir sticks to create a stunning sunburst mirror frame. Lamp to Mirror Frame Transformation Learn how a Tiffany lampshade was turned into a one-of-a-kind mirror frame.

Inset Cabinet Door Soft Close Hinge Install Modern Woodworking Chapter 12 Answers Dvd Best Rap Hip Hop Songs 1990s Woodworking Combination Square Review Tool