Seems Kreg don't provide much useful information on this little jig. Glue the edges of the joint together for added security. Thank you! I like to glue my joints as well as screw them, so now is the time to add glue. Change the placement of the jig.
First you want to adjust the collar on the 2-set drill bit to control the depth of the pocket hole. Kreg Mini Jig Position Next you want to make sure you clamp down the Kreg-Mini the appropriate distance from the edge of the material based on the thickness of the wood you are joining. You have to make sure that while working on Kreg jig mini, the drill bit must stop How To Set Kreg Jig Mini Quiz at ⅛” or less while poking into the board, otherwise it might create a fragment. Then you have to clamp the jig in its position. Then you have to drill the hole according to the measurements. Repeat the drilling process as many times as required. To set the jig for working with 1/2" (13mm) material position the edge of the jig 1/4" (6mm) beyond the edge of the workpiece and clamp. To center a screw in /2" (38mm) The Mini Kreg Jig incorporates a plug setting feature into the bottom of the tool that helps you complete this process. To use, simply place a plug into the profile on File Size: 67KB.

Best Rap Documentaries On Netflix 90 Setting Up A Kreg Jig 500 Oak Wooden Curtain Rods Wikipedia