APPLICATION Use adequate ventilation at all times. Stir thoroughly Apply when temperatures are between °F (°C) and the relative humidity less than 85%. Apply Varathane Premium Gel Stain liberally to the surface using a brush or lint-free cloth. First apply stain going against the grain to fill in pores. Then work with the. Jun 02,  · Gel Stain Drawbacks. Of course, no stain is perfect. One area in which gel stain is tied neck and neck with its traditional counterparts its drying time: although it’s easier to prep and apply. Stain Application: Apply a liberal amount of stain evenly with a brush or clean cloth. Wait 3 Gel Stain Application Temperature Errors minutes and remove the excess stain with a clean cloth, wiping in the direction of the grain. Allow to dry hours. To darken the color, apply additional coats of Minwax® Gel Stain repeating directions for application of first coat.
Although the surface temperature range on the labels of our finishes is between 40°F and 90°F, the most Gel Stain Application Temperature Not Working favorable temperatures for easiest application is between 50°F and 80°F. The finish most sensitive to cold weather application is Log End Seal™. Stain Application: Apply a liberal amount of stain evenly with a brush or clean cloth. Wait 3 minutes and remove the excess stain with a clean cloth, wiping in the direction of the grain. Allow to dry hours. To darken the color, apply additional coats of Minwax® Gel Stain repeating directions for application of first coat. Ideal Conditions are 70 degrees F and % humidity. Refinishing furniture in a space that is below or above the degrees F range can lead to problems, and a space below 55 degrees F is definitely too cold. WATER-BASED TOPCOATS One issue caused by cold temperatures with water-based topcoats is the development of dimples in the finish called Orange Peel.

Pocket Hole Jig As Seen On Tv File Cheap Dremel Wood Carving Tools Hvlp Finishing Sprayer Github