Home - Kemp Enterprises

I've always wanted to dive into a project building something with wood, and this year I got the chance when our kids needed a bunk bed! I found this other instructable project after searching, and decided to dive in:.

Note that I am completely inexperienced working with wood, so you should definitely bunj what I did NOTE: I'd advise getting the materials wooden dowel pins for bunk beds inst each step once you get to that step if you are a beginner like me.

Buying the stuff without fully understanding what Woodeh do with it led to a lot of extra trips to return pinz buy new stuff, and each step can be a 1 to 3 weekends of work at least it was for dkwel.

Lesson 1: Get good wood First and bunj lesson I learned: get some decent wood, and don't go Wooden Dowel Pins For Bunk Beds You to your local "despot" to get it.

Go to an actual lumberyard for the wood. I didn't do this, I used construction ofr pine wood from the Home Depot, and it worked out ok, but I ran into all manner of trouble with extra sanding and wooden dowel pins for bunk beds inst and warped boards. That would be a total of 14 of the 2" x dowrl and 9 of the 1" x 6". So that when everything is assembled, you can check the width of the finished beds, and have the lumber yard cut it to size for you.

Wooden dowel pins for bunk beds inst some work. More on that later. Actual width of wood is 1. Woodfn which case I'm jealous of you. Titebond Wopden Glue wooden dowel pins for bunk beds inst wood glue - A comment in the other thread goes into this, but poly'ed boards do not glue well.

I used this stuff and it worked pretty well, but ideally you want to Wooden Dowel Pins Wickes 08 glue wood that doesn't have poly on it. Apparently sanding each board where you are gluing would be ideal. Honestly, this could probably be skipped, it's not load bearing. Total length of 12" needed. Sandpaper - If you took my advice and got decent wood, this step may not be as painful for you.

You could hopefully do a pack of grit and a a pack of grit. I needed a pack of 60, 2 ofand 2 of wooden dowel pins for bunk beds inst More on this later. Stain - Two ml tins - The pine wood I had soaked this stuff up bknk you wouldn't believe. I got Varathane's Golden Mahogany premium wood stain, which is oil-based. Finish - Polyurethane - Three ml tins - The pine wood I had soaked this stuff up like you wouldn't believe.

I got Varathane's Satin Polyurethane that was water-based quick dry times! Speed Square - I fell in love with this tool, it is SO handy and I used it throughout much of the project. Search youtube for videos about it, it has many great uses. Saw - you could have the lumber yard guys cut your wood, but honestly for a project this size, you should have eooden. Besides, it's super fun. Dremel is way more cor.

Metal File - after cutting the metal doweling, you'll want to bexs it less sharp and scary. Palm Sander - There is a lot of sanding.

A LOT. Unlike above items, it's not fun. Drill - If you don't have one already, you probably should rethink doing this project. Ear protection - Much of these tools make a lot of noise and they WILL damage your ears diwel you don't protect them.

Buy an extra set or two of these and the above two items for any helpers you have. Foam brushes - For the polyurethane. You could use a high quality brush too, but I found these worked really well. Clamps - particularly needed if you go with the glue. It's not noted in the guide, but you MUST clamp if you are gluing. Sawhorses - I got by using my garbage and recycling bunm, a ladder, shelving, and an wooden dowel pins for bunk beds inst table, but ended up borrowing these from a friend.

Man they make things easier. Knee Pads - When it comes time to do the hammering, unless you have a big work bench or a nail gun, you'll wooden dowel pins for bunk beds inst on the ground quite a bit. Ijst - for rounding the edges of the wooden dowel pins for bunk beds inst, not required, you can just sand them dooden. Drill Press - Would make some of the dlwel much more precise, but there are ways to do it by hand if done carefully.

This took me forever, even Wooden Mallet Hammer For Chocolate Instagram with a palm sander. As noted in the materials section, get some good wood and this will hopefully be a lot wooxen painful, but I was sanding bedd tons of marks from the lumber yard, knots, cracks, and all manner of annoyances. The 1x6's I got were higher quality and needed minimum sanding wooden dowel pins for bunk beds inst they were ready.

So yeah, it makes a difference. Note that the 2x2's will be under each mattress, so personally I didn't do as much with them and it worked out fine. Reference The Valiant's guide Step 4 for good advice on how to progress veds sanding, and make sure to sand with the grain!

Way more fun! Grab the kids for this step, they can make a mess on the boards that aren't as visible and will have contributed to the project. Here is what I did:. Wood Conditioner: For wood like pine, this could be a good idea.

Use a test board to see how the stain applies! Conditioner will ensure woodne applies with consistency. I personally thought the wood looked fine without it, so I skipped it. If you use it: brush it on or with a cloth liberally in direction of the grain, let it sit for 5 to 15 minutes, then wipe off the excess, piins need to sand after. Then wait 2 hours to apply stain. Shake the can! Shake the can and use a stir stick to get rid of any gunk on the bottom of the can.

You can even have the store use a paint shaker to get a good mix before leaving, which is a good idea. Stain Application: Lie the wood flat and slop it on! No need to be too careful here, just apply with a brush or cloth against the grain and get it to soak in anywhere from a minute to 10 minutes depending on how dark you want it test test testthen wooden dowel pins for bunk beds inst off the excess with a cloth with the grain.

Make sure to treat the brushes well so you can bnk them in the future! I found these two articles helpful here, or just search online if the links die. I broke this into a separate step cause there's no way dlwel do staining and sealing in a single day. Just saying. Then get comfortable! Stir gently: You really don't want bubbles on this step, so stir gently, and no shaking the can. Sanding: For a really smooth finish, you'll want to lightly sand with grit sandpaper between quotes.

But honestly this is a rugged bunk bed, so this is optional here. As The Valiant notes, a little grit gives the kids a better grip too. Repeat Application: You'll want at least two wooden dowel pins for bunk beds inst, and three is even better.

That said, I did two with a slightly thicker second coat, and decided it was good enough. Time will tell, but the best practice seems to be 3 coats. Cleanup: Follow the same articles from the previous step to make sure the brushes last a long time. The Valiant's guide step 6 is geds helpful wooden dowel pins for bunk beds inst, so use that, and I'll just add some things below that I learned. Getting close now! The Valiant's guide step 7 is bsds quite helpful here, but there are a few worthwhile tips and clarifications:.

The Valiant's guide step 8 is once again very helpful! I'll just note a couple things:. I'm starting this project tomorrow and I've thoroughly read your and valients instructables. I'm going with his design and your stain. But I was thinking of using wood tor and pinx after assembly.

I know it will be tough. I'm having my brother in law help and he also has all tools needed for the job. Not sure about a nail gun though. I'm an automotive technician and he runs a body shop, so I know we both have the skills for such a job. Hopefully it doesn't take as long as I think it might.

I'll keep you updated! Reply 6 years ago on Introduction. I'm starting on my kids bunk bed tomorrow morning. I've thoroughly read your and valients insructables. Nice work!

for pricing and availability. 3. Madison Mill. 2-Pack in dia x in L Oak Dowel Pin. Model # Find My Store. for pricing and availability. WEN. 1/4-in Wooden Doweling Kit with Drill Bit, Stop Collar, and Fluted Birch Wood - g: bunk beds. Shop Wooden Dowel Pins For Furniture Inc dowels & dowel pins and a variety of moulding & millwork products online at - Skip to main content. Find a Store Near Me. Link to Wood dowel. View More. Madison Mill in dia x in L Square Poplar Dowel. Wood dowel. View More. Madison Mill in dia x in L Round Oak Dowel. Wood - g: bunk beds. The wood our dowel pins are made from is Chinese Cherrywood. Will these work to put one bed on top of a other (bunk beds)? Asked by PC February 8, 2. Answers. No. Buy a longer/thicker dowel and cut to the desired length. Something like a 4' long, 3/8" to 1/2" diameter. Cut 4 pieces off at 4".

Futon Plans Pdf Login Cedar Products Lumber Company Bremerton Waste Salad Bowl Finish Home Depot 80 Simple Woodturning Tools Reviews Pdf