MAKITA - Build your Dust Management System / Solution
1 Determine the air volume, in m3/h, needed to entrain the dust. 2 Estimate pressure drop through connected system − i.e. between point of entrainment and collector inlet. 3 Assess pressure drop over dust collector, prior to replacing filter cartridges, usually daPa. 4 The sum Jet Dust Collector Remote Network of Magnetic Dust Collector Fittings Kit 2 and 3 = static pressure at inlet. 2. Local dust collectors (VP-series) DESCRIPTION - box-shaped dust collector for dedusting of storage silos, belt conveyor transfer points, telescopic loading spouts, welding and cutting machines etc. OPERATION QUALITIES - flow rate m3/h - filter area 17,8 m2 - fan: 1,5 kW - residual dust concentration at the output. Data Sheet Donflo ® Oval Dust Collectors Series DFO , and Position of optional explosion relief flange (DFO illustrated) If a vent duct is not connected to the explosion relief flange, then a minimum clearance of mm should be made to the side of the collector to ensure efficient operation Rt0701cx7 Dust Collector Work of the explosion venting process.

Makita Router Kit Rt0700cx3 No All Carpenter Tools 3ds