Rout the drawer front 1. Insert the bit securely in a table-mounted router and set the bit height so the top cutting edge is 3/8" above the table. Note: Use only in a table-mounted router at reduced RPMs. 2. To machine the door front, set the fence 3/8" back from the outermost cutting edge of the bit. Fig. 1. Note: As with other joinery bits, we recommend making testFile Size: KB. Minimum material thicknesses for the Drawer Lock Joint Router Bit are 3/4" for the drawer front and from 1/2" to 3/4"-thick for the sides. When making a box-type drawer use the same thickness material for the rear face as used for the front. The material must be flat and square with accurate degree end cuts for the joints to be straight and. Jun 04,  · Product Description. Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is integrated/5().
Jun 04,  · Product Description. Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts Locking Drawer Router Bit 70 fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is integrated/5(). Nov 27,  · 2) Mount the drawer-lock bit in your Locking Drawer Router Bit Model table-mounted router, and set the top of the cutter so that it's 15 ⁄ 32" above the tabletop. 3) Calculate the fence position by adding your drawer front's intended overlap (if any) and the thickness of your drawer side. Position your router table fence that distance back from the upper cutting edge of the bit. Minimum material thicknesses for the Drawer Lock Joint Router Bit are 3/4" for the drawer front and from 1/2" to 3/4"-thick for the sides. When making a box-type drawer use the same thickness material for the rear face as used Locking Drawer Router Bit 64 Bit for the front. The material must be flat and square with accurate degree end cuts for the joints to be straight and.

Power Carving Burs Up Wood River Planes Canada Zip Code