JET VS Wood Lathe Review. The product is from Jet, a brand that any woodworker will be extremely familiar with. Because when it comes to woodworking tools, the jet is a reliable manufacturer. And you should expect nothing less than from this one as well. Now, the JWLVS has a powerful motor meaning it can rotate the workpiece with sufficient speed. No matter how big the task is, you’ll find it up to the standard. You’ll be pleased to learn that this one has variable speeds up to RPM. Jet VS Lathe Review Midi Wood Turning.  JET Variable Speed Midi Lathe Overview (by JET TOOLS USA). Craft Supplies USA. The Jet VS wood lathe ordered from Amazon is evidently not a quality machine. After receiving my first lathe, I immediately discovered a loud noise in the headstock which increased with the rpm's, suggesting a defective bearing. Jet tech support could not help with this problem, so I returned the lathe to Amazon. Thinking I merely had "bad luck" with the first one, I re-ordered the same lathe in hopes of receiving one that was not defective. Upon arrival, the second lathe had the same presumed defective headstock bearing, performing in a manner identical to the first one. I.

Please read the new sticky announcement HERE for full details. Forums New posts. Photo Gallery New media New comments. What's new New posts New media New media comments Latest activity.

Members Registered members Current visitors. AAW Main Site. Log in Register. What's new. New posts. Log in. Install the app. We just finished a major forum upgrade. Hope you enjoy the refreshed site!

Welcome new registering member. Your username must be your real First and Last name for example: John Doe. Also, do not use all caps nor all lower case. JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding. You are using an out of date browser.

It may not display this jet 1221 wood lathe network other websites correctly. You should upgrade or use an alternative browser. JET vs Alignment.

Thread starter David Gilliland Start date Aug 24, David Gilliland. Hi all, first jet 1221 wood lathe network here.

I'm a relatively new wood turner. I started on an old grizzly mini lathe handed down to me, and recently upgraded to a JET vs. Out of the box, the headstock and tail stock of the JET are not perfectly aligned horizontally please see attached pic.

I've reached out to JET and they've told me to "shim the bolts" or file down the tail stock. I'm not really comfortable filing a brand Jet 1221 Wood Lathe Pro new piece of equipment with my limited experience, and I'm still working on getting shims so haven't tried that yet.

I'm wondering if: a Should I expect perfect alignment out of the box, and if so, should I be pushing JET to fix the issue rather than trying to implement their recommendations? I'm definitely getting a lot more vibration on this machine compared to the Grizzly, which is making it hard to get a smooth finish on my cuts, but I don't know if the alignment or another issue with my setup is causing this.

Thanks for any wisdom you can impart on this newbie! Regis Galbach. I think the vibration would bother me more than that aliignment. If you are doing spindle work that alignment may cause a problem. For bowls, platters, and hollow forms I don't see that as an issue. Hopefully someone has tips on the vibration. Bill Boehme Administrator Staff jet 1221 wood lathe network. Beta Tester. Welcome to the AAW forum, David. I wouldn't be too concerned about something that small.

It looks pretty good to me. Besides, matching points only tells you half the story For turning between centers, perfect alignment is meaningless because the spindle is rotating about its own axis I don't understand Jet's response since you said that the misalignment was horizontal and not vertical. There is generally enough lateral play in the tailstock to zero out misalignment if you haven't tried that yet.

As Regis said, the vibration is a much greater concern. Could you describe the vibration in a little more detail? With the lathe running and nothing mounted on the spindle, is it something that is audible or is jet 1221 wood lathe network that is felt? How is it affected by speed? Remove the belt to see if it is still a problem with only the motor running. Use a dial indicator to measure the runout on the spindle to see if it might be bent Owen Lowe.

A thought on vibration and misalignment… when you take firm hold of the spindle and the hand wheel, can you feel any movement whatsoever jet 1221 wood lathe network twisting in opposing directions? I noticed in pics of the lathe that the headstock appears bolted to the bed. It may be ever-so-slightly loose. The misalignment could be the result of the headstock sitting canted a touch.

Hopefully this one check will solve both issues. Thanks for the quick reply guys! I will look in to the other items RE: vibration and hope to get back to you guys soon with some updates. I do not have a bench I jet 1221 wood lathe network bolt the lathe to, so I have it bolted to a piece of plywood which I then have clamped to the bench.

This is not ideal I know, but it's my best option at this point. So far it sounds like the group consensus is that the jet 1221 wood lathe network misalignment is not a big enough deal for me to raise a stink with JET, and I will focus on looking in to these other issues that may be causing the vibration.

Thanks again! Gerald Lawrence. If after looking at the items Bill suggested. Also tighten all bolts. Then if no results is the piece you are turning very unbalanced, if so that is something you can partly get by doing jet 1221 wood lathe network better job of centering the workpiece.

Bill Boehme said:. Click to expand Mine is not quite that loud but mine is also on wood cabinet although it is bolted solid. Jet 1221 wood lathe network can't tell if there is vibration in yours but, I do hear the bearings. Mike Johnson. The random noise you are getting may be from the bearings or the thin ribbed belt. Depending on the Jet 1221 wood lathe network of the individual components turning you could be getting vibrations and noise that resonate at those speeds.

You might check the set screws on the motor drive pulley and the spindle pulley to make sure they are secured. Many of the off shore bearings being made jet 1221 wood lathe network days are of questionable quality.

Most jet 1221 wood lathe network the imported industrial equipment our company commissions require the bearings to be replaced before we can get them running to specs. Jet 1221 wood lathe network could use a dial indicator to check the run out on a straight piece of round stock chucked up on your lathe. There are a number of video's on YouTube that explain the process of checking run out on a lathe.

Another simple solution for aligning the center points is to jet 1221 wood lathe network the 4 mounting bolts of the head stock and align the 2 points and then tighten the mounting bolts as you watch the alignment of the two points. But this can also throw the alignment off of the head stock and the lathe ways.

On a precision machine you would level and align the head stock first using shims so that the spindle is centered and aligned on the lathe ways and then address any alignment issues with the tail stock. On the two videos that are titled "spindle in" and "spindle out" actually the spindle is the rotating element of the headstock, the piece that plugs into the Morse taper socket of the spindle is the the drive spurI hear a lot of bearing noise.

With the belt removed, grab the spindle nose or at the handwheel and see if there's any radial or axial free play. If I'm not mistaken, the axial play can be taken out by adjusting how far the handwheel is screwed on. You can check the bearings by turning the spindle by hand belt removed, of course and carefully listening for any slight ticking or other noise. Bearings in good condition ought to be quiet.

Next, give the spindle a quick spin by hand to see if there is any noise such as a rattle or growl. David, I just did the test procedures listed above and learned something about my and really didn't finds any problem that I could hear. BUT, I did quiet mine down. Every time I have moved the belt, I had put lot of pressure on the lever to put tension on the belt. Well, I tried with just light-to-moderate pressure and it quieted down a LOT.

Mine was not as loud as yours but, it still jet 1221 wood lathe network bearing noise. Thanks, Regis.

Regis Galbach said:. I'll record mine. Thanks for mentioning that, Regis.

JET JWLVS Inch by Inch Variable Speed Wood Lathe is a personal choice among the many options available because it is versatile with optimally designed speed that ranges from 60 to RPM to use for any type of wood and various jobs. It is also convenient to use and operate with its quick belt change www.- ted Reading Time: 8 mins. JET JWL more than fills the void between traditional mini and full-sized lathes. Add the JWLBE 28” bed extension and the JET JWL between centers capacity expands to nearly 50”, rivaling that of much larger and substantially more expensive woodturning lathes. In its standard form, (left) the JWL is a very capable lathe. The Jet SP is a special step pulley Lathe targeting novice wood turners at a great value price point. This SP Lathe shares all of the quality and durability of the popular VS Lathe with the exception of the drive mechanism which is a one directional, 6 speed step pulley/5(54).

Cool Wood Fence Designs University Mitre Saw And Table Group Best Bench Vise Under 200 Use