Wow, this is quite a heated debate. To detension or not to detension timberwolf saw blades llc your saw is idle… That is the question! The set in the teeth comes along with the milling, not by bending the teeth—providing a more uniform set. Log In. When you see the band start to flutter, you have hit ground "ZERO".

Start the machine, engage the clutch into the high speed cutting mode. NOTE: You will not be cutting any wood. Stand at the head of the machine, with your hand on the turn screw tensioner and your eyes on the band saw blade.

Very slowly start detensioning by half turns at a time, keeping your eyes on the band saw blade. The object is to bring the tension of the blade down to a point that the blade starts to flutter. When you see the band start to flutter, you have hit ground "ZERO". At this point ADD one-eight to one-quarter turn of tension. You have now tensioned our blade correctly. Shut off the machine and put your guides back in place. You are now ready to start sawing.

Since you do not know exactly where the proper tension is, it will be easier to remember if you take off 8, 9, or 10 full turns of tension until the band is completely relaxed. The next time you use our bands, add the same amount of turns of tension that were taken off. At this point, you will only have to run the flutter test one time.

Quick View. Add to Cart. You must be logged in to write a comment. Log In. Find a Store. My Account. My Cart. Go to Home Page. Mobile Navigation. Same Day Shipping Find a Store. Search Go.

Topics Cabinetry. A perfect balance of superior steel, blade width and thickness plus precision set teeth produce a superior cutting blade with exceptional overall life. Our PC Series of blades is our claim to fame. It is, in its design, everything a wood cutting blade was meant to be. By incorporating a "hook" style geometry in our gullet, we have given our blade the ability for fast chip removal.

Due to its round design we have eliminated any work hardening zones in the gullet. Couple all this with our unique 6. They are. They also utilize the unique geometry of our PC gullet. These bands are primarily used in furniture industry. They Timberwolf Saw Blades 900 have been designed to cut both fast and accurately in very thick wood such as stacked lumber. Woodturners use these blades to cut turnings out of large burls.

Their applications are endless. Their performance is excellent if the thickness of your material exceeds 6 to 8 inches. These blades are not meant to be used on any 3-wheel saw or for that matter any saws with less than a 90" blade length or wheel diameter less than 14".

The total overall set is less than. When you are resawing very expensive woods that are thick and you want as thin a kerf as possible, a super finish, and you are not concerned with speed, this is the blade for you.

The variable tooth design reduces resonance throughout the blade; this combined with different size teeth produces a very clean finish almost polishing the wood as it is cut. It is only. They are also very effective in plywood, particle-board and other similar products where tear-out is a concern. These blades can also be used to cut soft metals. Copyright PS Wood Machines. All Rights Reserved.

C J Wood Plant Hire Co 935 Wood Bandsaw Blades 30x40 Wood Shop Layout