Минвакс Tung Oil Finish тунговое масло. Фасовка: мл. Бафус.  Watco Tung Oil Finish тунговое масло. Возможное применение: прекрасное решение для защиты и преображения мебели, дверей, шкафов, барных стоек, деревянных панелей, плинтусов, молдингов, деревянного декора, деревянных элементов оружия, рукояток ножей и многого другого Краски в Москве. Тунговое масло MINWAX® Tung Oil Finish – профессиональная финишная отделка для деревянных поверхностей, делает текстуру древесины насыщенной за счет глубокого проникновения, придает поверхности блеск, а также обеспечивает прочный слой защиты. Рекомендуется для деревянной мебели, антиквариата, изделий из дерева, шкафов, дверей, панелей, молдингов и т.д. только внутри помещений. Технические характеристики масла Minwax мл. Вид тары металлическая банка. Объем, л 0, Время высыхания, ч Отзывы о тунговом масле Minwax мл Оставить свой отзыв. Расходные материалы для масла Minwax Minwax Tung Oil Finish Ingredients Review На данный момент для этого товара нет расходных материалов. Обсуждения. If its not shiny, just keep putting coats on. For a great sheen, durable finish, great results, order Waterlox original finish Tung Oil. I've had better luck with Boiled Linseed Oil, I must have done something wrong when I tried tung oil, it never really dried. Once I had what I wanted, I used Steel wool with pure paste wax and buffed it with the wool and wax. Do not transfer contents to other containers for storage. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection NIOSH approved or leave the area. Thread starter Minwax tung oil review 51 Fritz Start date Jun minwax tung oil review 51,

If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection NIOSH approved or leave the area. Avoid contact with eyes and skin. Wash hands after using.

Keep container closed when not in use. Do not transfer contents to other containers for storage. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.

Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. While Tung Oil offers a soft, hand-rubbed finish, additional gloss can be achieved by applying multiple coats. The better the wood preparation, the better the final result. Looking for speed and convenience?

Minwax Design Series washes, wood effects and waxes offer new options for bare wood and wood that's already stained. Combine the Minwax Design Series with other Minwax stains to produce on-trend looks, finishes and special effects. For superior durability and long-lasting beauty, the choice is clear — protective clear finishes from Minwax!

Where to Buy. Easy to maintain, it is the ideal protective finish for woods that have been refinished because it penetrates wood pores to restore vitality to dry, thirsty wood. Directions Sand wood to obtain a smooth, uniform surface. Remove all dust with a cloth dampened with mineral spirits. Be Minwax Tung Oil Review Zeal sure the stain has completely dried before applying the finish.

Apply in the direction of the grain. Let sit on wood for approximately minutes, then buff evenly with a clean, lint-free cloth.

Wait 24 hours and apply a second coat. Two coats are recommended. For additional gloss, repeat after 24 hours. I'll keep trying a few more coats for now but is there something I should be doing as a final step? I love the stuff but never went for a high gloss finish so I'm not sure if it will do it nor not. Here's what I would try. Then do the last 2 coats.

If you don't Minwax Tung Oil Review 01 like the gloss after that wait a few days for it to get good and hard then try automotive polishing compound. Not wax, but the super fine abrasive paste. Click to expand I've had better luck with Boiled Linseed Oil, I must have done something wrong when I tried tung oil, it never really dried. Harvey T. Joined Nov 30, Messages 79 Likes 8. Tung Oil I have tung oil on furniture and a stair railing.

I used two thin coats, applying steel wool between coats. It takes a while between coats The results are a soft sheen which, in my opinion, gets better over time. I don't think that you will achieve a significant gloss using just tung oil. I have never used minwax. In any case, a mature coating of tung oil protects the surface very well, and again, in my opinion, is handsome.

Harvey T said:. I have tung oil on furniture and a stair railing. Just curious, how many coats do you typically apply? Spanz NES Member. Joined Feb 25, Messages 40, Likes 36, Spontaneous combustion. Joined Dec 11, Messages Likes Some good tips above. Unless the label says "pure" tung oil, it's a concoction containing a fairly small amount of actual tung oil.

Which is okay. I've done three or four guns with tung oil finishes. I generally give them upwards of a dozen coats, buffing gently with steel wool followed by a tack cloth between coats. Also looks much better - again, IMHO. Most of the tung oil finishes come in low- and high-gloss variants so you can pick the one you prefer. Joined Jul 9, Messages 48 Likes 3. Tung oil is a product of the Tung Nut, from China.

There have been wooden boxes found in the ground in China, two to three thousand years old, still preserved by tung oil. Problem is, some have as many as. You can get pure tung oil but, the buildup takes forever.

Tung Oil penetrates to the bottom most pores of the wood and, builds from there. Quicker buildup! For a great sheen, durable finish, great results, order Waterlox original finish Tung Oil.

Google it and, order directly from them. Brush it on and, rag guide your finish. Do not rag it off, simply smooth it with a good cotton lint free rag Tee Shirt. Joined Jan 23, Messages Likes To the OP. I've refinished stocks with Minwax Tung Oil. Whatever is in it, it has always turned out well. I like the fact that the build up is slow. It allows me to get just the level of sheen I want.

If its not shiny, just keep putting coats on. I wet sanded with mineral spirits between coats. Once I had what I wanted, I used Steel wool with pure paste wax and buffed it with the wool and wax.

I've done gun stocks this way as well as furniture. It always comes out gorgeous. I've since switched to Minwax Wipe On Poly. It won a recent shoot out in Fine Woodworking Magazine. It was a blind test. The testers were given unmarked bottles and used the stuff. There were several BLO and raw linseed variants as well as esoteric stuff and tung oil. Wipe on Poly won the shoot out.

I use it a lot. It works just the tung oil. I do wonder if its not just regular poly cut down so each coat builds less.

Fine Woodworking Tool Cabinet 84 Wood Floor Sanding Machine For Sale In