Related Items. Shopping Cart Toggle navigation. Spot the difference Details Use Tool Care No. Langganan: Posting Komentar Atom.

It is capable of precise joints and perfect flatness of large areas. Click here to download a PDF copy of the instructions for this tool. Lie-Nielsen Bench Planes except for the No. In addition, the construction of the frog is unique — it features a fully machined fit between frog and body, adjustable from the rear without having to remove the blade and cap.

This allows you to easily change the mouth setting from a coarse to fine cut for difficult woods or fine smoothing passes. To advance the blade, turn the adjuster nut clockwise. It is always a good idea to finish adjusting the blade by a forward adjustment to take up backlash and to prevent the blade from moving. In order to be able to adjust the blade easily, do not overtighten the lever cap screw.

To adjust the mouth opening, loosen the two locking screws at the back of the frog; then turn the middle adjuster screw. Observe the opening in front of the blade. When it is correct, set the locking screws again. You should never need to dress this surface, but if you do, use a very fine stone and be sure to maintain the angle. Iron tools are cast from Ductile Iron, a very strong alloy that will take a lot of abuse. These castings are fully stress relieved, a process that removes inherent stresses and ensures that the tool will remain flat and true.

The blade is A-2 cryogenically treated Tool Steel, hardened to Rockwell and double tempered. Our heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very quickly.

The thick blade provides solid chatter-free cutting. The cap is Manganese Bronze. All Bench Plane bodies are surface ground flat and square to a tolerance of. Tools with Iron bodies should be kept lightly oiled or waxed to prevent rust.

We recommend Jojoba Oil , a plant based oil product that is non-toxic, odor-free and easy to use. Also, in our shop, we use a fine abrasive handblock to remove any light surface oxide from tool bodies and blades. Jojoba Oil and abrasive handblocks are available from us. A light oiling on the threaded rod, the Brass adjuster nut and the lateral blade adjustment lever will keep them moving freely. Many people like the patina that Bronze gets with age and use, but if you wish to keep the finish bright, a little brass polish is in order.

To adjust the mouth opening, loosen the two locking screws at the back of the frog; then turn the middle adjuster screw. Observe the opening in front of the blade. When it is correct, set the locking screws again. You should never need to dress this surface, but if you do, use a very fine stone and be sure to maintain the angle. Iron tools are cast from Ductile Iron, a very strong alloy that will take a lot of abuse.

These castings are fully stress relieved, a process that removes inherent stresses and ensures that the tool will remain flat and true. The blade is A2 cryogenically treated Tool Steel, hardened to Rockwell and double tempered.

Our heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very quickly.

The Lie Nielsen Jointer Plane Review App thick blade provides solid chatter-free cutting. The cap is Manganese Bronze. This plane comes with a new and improved Stainless Steel yoke installed in the Frog. The Steel is stronger than Bronze and will be more resistant to wear over time. All Bench Plane bodies are surface ground flat and square to a tolerance of.

Tools with Iron bodies should be kept lightly oiled or waxed to prevent rust. We recommend Jojoba Oil , a plant based oil product that is non-toxic, odor-free and easy to use. Also, in our shop, we use a fine abrasive handblock to remove any light surface oxide from tool bodies and blades. Jojoba Oil and abrasive handblocks are available from us. A light oiling on the threaded rod, the Brass adjuster nut and the lateral blade adjustment lever will keep them moving freely. Many people like the patina that Bronze gets with age and use, but if you wish to keep the finish bright, a little brass polish is in order.

The Cherry knob and handle are oiled and buffed with wax to produce a natural finish. Wipe with oil as desired to refresh. Find everything you need for tool care. Materials and workmanship are guaranteed for the life of your tool. Call for repairs or replacement parts. We are available for advice if you ever have a problem using your tool.

Plan Wood Quotes Used Wood Turning Lathe For Sale Near Me Us Pocket Hole Jig Jula Lyrics Hardwood Products Leander Tx Keyboard