Next video is make a shooting board & test cutSteel: 3/16 (T) steelThe blade is skewed at 20 degrees to the www.- angle: 45 degreesThis Plane 15". I made a shooting board for my hand plane that can easily hold attachments for all different types of projects.  I have been meaning to make a shooting board for a while, but I wanted to make it versatile and adaptable for more than one situation. So I came up with this shooting board that can hold different attachments just by making a simple dado in a block of wood. In case you don’t know what a shooting board is, it’s a way to easily clean up and square up a cut with your hand planes. It is most typically used with hand saws chances are you will not cut a piece square and flat with your hand saw, so the shooting board fixes any wonky cut. It’s not only for hand tool users though, it could also be use. A state-of-the-art shooting board plane. An excellent choice for squaring end grain boards. Includes a lapped blade of your choice. View full description.  A bevel-up plane, it has a blade skewed 20° to reduce cutting resistance, producing a shearing cut that leaves a neat, crisp finish on end grain. Combined with the 12° bed angle and 25° blade bevel, this yields an effective cutting angle of 35°. The tool includes a lapped blade of either O1 or PM-V11™ tool steel.
Length has little to offer a shooting board plane. The Stanley #51 is 15" long, the same as a #5 1/2. A shooting board plane is not like a jointer. A jointer benefits from a long sole for registration. The shooting board plane obtains its registration from the side of the shooting board’s runway. You will find it easier to hand joint stock using a shooting board or jointer fence. If your plane’s wings are not square to the sole, use the lateral adjustment of the blade to set the cutting edge at right angles to the board or jointer fence first. Left: After locating and marking the high side, position the plane so the blade cuts only. Jun 27,  · I do not use a jointer plane for long-grain shooting, even if the workpiece is 36″ long, the maximum capacity of my new long-grain shooting board, or about as long as I’m likely to shoot even if I didn’t have the new jig. The principal advantage of any jointer plane is, of course, its long length.

Long Drawer Slides Nz 5g Free Plan Wood Project Name