Veritas Custom #7 Jointer Plane - Lee Valley Tools

It's nice. The only complaint I have is not really a complaint, but I don't know what category to put it in.

The iron came in a separate package, and stated on it, and in jointer plane lee valley quotes instructions that came with the plane that it was sharp to start with. In my book, it wasn't. Leee would barely shave hair on my arm. I got the O1 valkey, so thankfully jointer plane lee valley quotes was easy to finish sharpening it.

The iron looks like it was cut on a shear, and one side is rough with some rust on it. It is joinger and flat on both faces. I vallej or may not get around to cleaning up the sides, but I guess jointer plane lee valley quotes really doesn't matter. For a long time, I've used a Lion Trimmer for jobs that you would do with a shooting plane.

I stuck a board together out of scraps, and the first advantage I noticed over the Lion Trimmer is that you can more accurately gauge how much you are taking off. For instance, jointer plane lee valley quotes you have the plane set to take a. I have some Corian ordered to make a board out of.

When I get around to making the board, I'll post some pictures. I knew I could use one of my other planes, but none of them are that comfortable sideways, and I have all of them set up for a specific use.

After getting this one, I'm glad I did. It's very comfortable valleg use, and works like a charm. The bad thing is now that I have the right handed one, I also want a left handed one, which they offer.

I agree about the out of the box sharp. It is acceptable in the industry but not to my standards. Both my lie nielsen and vertias blades went through my sharpening regiment to get them to my standards. I am eager to know ur thoughts on the o1 blade, i am waiting for mine to arrive for my ln jointsr. I bought it to test the steel and form my own opinion as quotee to repeating online reviews.

The steel is fine. I didn't see any difference in it and any other Jointer plane lee valley quotes iron, other than it being really thick. I don't have any problem taking transparent shavings with stock irons, so I don't really expect that this one will be superior any kind of way as far as sharpness goes.

The nice thing is that the plane doesn't require any kind of tuning to be able to take advantage of a sharp edge. Do you guys remember the article that PWW did a while back on the lapping process that LV plane blades go through? I did and I had same expectation as you. My experience has been mixed. Sharpened my new skewed rabbiting block plane last night, flattening the back only took about 20 min. Both were the new PM-V So when tuning up a new quores blade, jointer plane lee valley quotes YMMV.

I played with one today at the show and I really enjoyed it. I think the major advantage is the skewed blade And it was very comfortable to use. Joinyer IMO if you already have a low angle jack or jointer plane, the purchase probably isn't worth it unless you got money to burn I agree that it costs more than it's worth for normal usage. We have several hundred small pieces to fit together, as well as long edges to joint that are too fragile to do it any other way without a whole lot of jointer plane lee valley quotes setting up.

Sample tests show that this works like a dream for iointer we need. The time saved, and the quality level it should raise the finished pieces too will make it a very worthwhile deduction. I got around to making the Shooting Board out of Corian on Friday, but I forgot to carry the camera that day.

It turns out it jojnter a good bit of luck to get the one from LV because we are going to need the left-handed one too, and LN doesn't make a lefty of theirs.

Heart Pine absolutely has to be backed up, and a fixed fence is easier than moving some backup piece for every cut in that direction. It should be a nice pair. Having the track for the plane to run in makes it Vlaley easier than having to hold something else on edge against the fence for many any repetitions.

My biggest complaint is the movable tote mount. I wish they had just picked the standard lse and made a strong, fixed mount. I'm used to grabbing a plane and toting it by the tote. With this one, I'm a little shy of doing that because of the adjustment thing.

Other than that, it works fantastically. I also recently purchased a veritas shooting plane. Still need to make a shooting board though. I have multiple veritas planes, all with the pm-v11 steel as well as a pm-v11 chisel. I have to flatten the back of all the plane blades and my chisel before they're ready for use. I think that may be true for every manufacturer.

I think it may just depend on how much time you have to spend getting the blade ready for use is what makes the difference between the different manufacturers. That and steel quality. I do wish that lee valley wouldn't put that coating on the back of their plane blades though.

It is annoying getting that off the first few strokes on my sharpening stones cause it has a lot more friction than just the bare steel. At least it comes off easily.

We had a job come up inlaying a bunch of pieces into an oak floor, and the shooting board has been used a LOT. I like the plane a LOT jointer plane lee valley quotes. I found myself holding it on the metal body instead of using the tote jointer plane lee valley quotes the first 50 or so pieces.

You might see the smudge where my thumb rests in mointer picture. I haven't bought the left handed mate to it yet, but intend to when we get on another job where both will jointer plane lee valley quotes useful.

It's a great benefit having one that runs in a track, rather than using another plane that you have to hold against the edge.

This plane has been sitting le in the shop since I first got it. Bare metal condition is thanks to CRC 3. Today when we left for the week, I rubbed it down since it had been used a lot this week, and the thumb smudge came right off.

The 01 iron hasn't been sharpened since it first came but one time. Another happy owner. Having more positions for the handle could benefit some users but, he two they jointer plane lee valley quotes suit me well. I would strongly recommend this to anyone jointer plane lee valley quotes a plane of this type.

The paperwork that came with mine stated that the iron is lapped and ground to a certain bevel and microbevel but, I didn't jointer plane lee valley quotes anything about it being ready to go right out of the box.

The back of the blade is lapped flat to 0. Maybe they've refreshed the wording since it would be hard to economically provide a blade that was as sharp as many of us like our edges. Mine took a fw swipes to bring into readiness vallsy is a lot less than some other cutters Jointer plane lee valley quotes have received. I hope my wife heard my suttle hints that I would love one of these for fathers day this year.

He will absolutely love it. Oh, and all the other kids have one and will be making fun of him starting the day after father's day if he doesn't have one.

That looks like a sweet setup gee-dub. Can you give me some detail on your board? Right now I have two seperate boards, one for miters and one for Jointer plane lee valley quotes you have threaded inserts to screw into to change the fence from 90 to 45?

The design kind of followed the length of the track 24". This meant that the far end was pretty far away. While I do shoot things a foot wide or so now and then, mostly it is narrower stock.

As long as I was going to have multiple positions I put one close for real small stuff as well. The fences are held with carriage bolts from below, no threaded inserts. I had the 16" on my wishlist. Seems like the 24" capacity would rarely be used. Have you ever needed the 24" capacity?

I went through the same internal discussion and decided that for the small increase in price I would rather cut a too-long track jointer plane lee valley quotes than try to make a too-short one longer. The questions are "how wide do I want to be able to shoot? I thought I might cut the track down to about 20" but, in fact this saved me very little room and made no difference in where I stored it so, I left it.

As long as I now had the "extra" length I went ahead and added another fence position. This lets me leave the fence in the middle for jointer plane lee valley quotes of my work. In the event that I will be doing a lot of small close work I can use the closer fence position and if I am shooting things over 8" wide or so I can use the rear position.

Our jointer/edger can be used on cabinet scrapers, scraper plane blades, handsaws and ski edges. It has a 45° jointing capability as well as the standard 90°. The handle has a comfortable, ergonomic shape and the screws are designed so they can be tightened with a 25¢ piece (to accommodate skiers).Brand: Veritas. To initially set the blade, open the mouth fully and place the plane on a fl at wood surface (e.g., a scrap of stock). Lightly clamp the blade with the lever cap knob and advance the blade until it just touches the wood. Flip the plane to a sole-up position, then sight along the sole to ensure the bladeMissing: quotes. The #5 1/2 is a large jack plane at 15" long and 3" wide. The wider 2 3/8" blade lets you remove more wood with each pass, making rough flattening and dimensioning work more efficient. Its 6 lb 9 oz weight provides more inertia when planing. It can also serve as a jointer for smaller work; lighter than the #7 jointer plane, it is less tiring to Missing: quotes.

Elmers E7010 Carpenters Wood Glue Twitter Easy Woodworking To Sell 50 Diy Desk With Scrap Wood 2019 Things To Make Out Of Wood Scraps Pdf