Memberships Newsletter Sign Up. Then, Install European Cabinet Door Hinges Chord measure from the bottom edge of the door and mark a line. A concealed hinge will be hidden from view but will require you install european cabinet door hinges email bore a hole in the cabinet door. Hinge Brand. Mark a line with a pencil that fmail from the top of the cabinet down to the bottom so you can intersect it with your hinge measurements.

Facebook Twitter Pinterest Email. Tools required: Pencil Ruler Power drill mm Forstner Bit 2 Pozidriv screwdriver Hand-tighten only when using a screwdriver Hinges, including hardware and template Directions: Use the template included with your purchase to mark holes in your cabinet door. If you do not have a template, you can use the AlignRight Mounting Kit in the link above.

Do not drill through your cabinet door! Test to make sure that the flanges of your hinge touch the surface of the door.

Insert the hinge cup into the holes. Use a ruler to ensure that the hinge is aligned, and drill pilot holes through the screw holes.

Then, use a screwdriver to hand-tighten the screws to anchor the hinge cups. Align the cabinet door with the cabinet. If you are using the included template, follow the guidelines to align the cabinet door. Install the mounting plate to the door by aligning the screw holes with the cross you have just drawn on the inside of the cabinet.

Drill pilot holes first, and then use your screwdriver to insert the screws. With a Clip-top Blumotion hinge, all you need to fine-tune the position of a cabinet door is a 2 Pozidriv screwdriver.

A 2 Phillips-head can strip the hinge's screws. By Steve Roca. Pinterest Email Pocket Flipboard. Steve Roca adjusts a soft-close inset hinge to even up the gap around the door. Concealed Cabinet Hinges in 9 Steps 1. The point where the lines intersect marks the center of the hole for the hinge cup, the part that recesses into the door.

Blow out the shavings and test-fit the cup to make sure the hinge flanges touch the door surface. Drill the remaining cup holes.

Position a rafter square, as shown, to keep the hinge aligned.

Dresser Hardware Pulls Gold 01 Finger Joint Jig Router King Cnc Wood Design Cutting Machine Research Best Raps Of 2020 Us