L-Handle Keyed Cam Locks. A plastic -coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications. These locks open with their own unique key as hardwrae as a master key. Open each of these locks with a different key. Padlockable Draw Latches. To secure cabinet cam lock hardware design components, pull the slide over the stud until they snap together. Send Cancel.

S Parker Hardware 1. Selby Furniture Hardware 1. THH US Futaba 3. USA Forgot password? Home Cabinet Hardware Cabinet Locks. Product Filters. Types ada cabinet lock pull 1 cabinet latch 2 cabinet lock 80 cabinet lock accessory 16 closet door lock 2 combi-cam cover 1 combination cabinet lock 8 elbow catch 4 finger pull 1 installation tool 1 key blank 6 keying accessory 1 keyless cabinet lock 10 keyless cabinet lock transmitter pad 1 magnetic key 1 mailbox lock 1 mini cabinet lock 2 mounting plate 1 plunger lock 2 pocket door keyed lock 2 power cord 2 power supply 1 push knob with latch 2 smart card 1 smart card programmer 1 smart card reader 1 strike plate 13 tubular cylinder lock 1.

Style traditional Door and Metal Cabinet Cam Locks Normal Drawer Cabinet Locks. Cabinet Lock Parts - Strikes and Cams. Stealthlock Keyless Locking System. There are several dimensions to be aware of in order to ensure a snug, gap-free fit between the door and the enclosure cabinet.

A hinged electrical junction box or equipment enclosure door will normally mate with the surface of the cabinet or enclosure, often sealing over a vertical lip.

However, some enclosures are made with recessed doors, making contact with an inner lip built into the box. In either case, this is one of the first dimensions you need to properly size the cam lock. Determine the distance between the outer surface of the door and the inner surface of the enclosure where the cam will make contact.

This dimension ensures a snug fit. The actual thickness of the door is not usually an issue in metal enclosure because the barrel of the latch is threaded and secured with a locking nut. However, the maximum panel thickness may be important if the door is made of wood or other thick materials. In the above example, you see the grip range dimensions. Often this is adjustable, and its main purpose is to allow for the gasket used if any to seal the door.

Note that the grip range has a maximum and minimum grip dimension. The barrel or housing must be matched to the latch hole in pre-punched doors. Most barrels are round and have a threaded diameter to accept the locking nut but are also flat on opposing sides to prevent the latch from turning in the mounting hole.

Often the compression can be adjusted when the door is closed by rotating the latch knob.

Best Router For Table Mounting 2020 Kitchen Cabinets Hinges Home Depot 3d Viking Lumber Products Free Woodworking Plans For Armoires Sa