This tool allows you to work for a long time. It also has the power to last a long time with 3-year warranty. I will say that i do use feather boards when ripping but just to claim straight out it is dangerous, maybe it is on YOUR saw. By continuing to use this website, you agree to their use. This portable radial saw is easily movable from one working place to another.

This has to do with miter saws typically having a smaller blade generally 10 or 12 inches in diameter , and are made for adaptability rather than just raw power. Radial arm saws also have a higher power output than their counterparts, and if you need to get a larger project done, you will need that extra power to get through tough materials.

The miter saw is widely considered to be a great saw for beginner woodworkers, while the radial arm saw is the exact opposite. The radial arm saw does not have the same kind of safety features that its counterpart does. It is also bulkier, which can wear on your arms after continued use. Miter saws are much easier to move around due to their lightweight and compact design. Plus, their smaller blade is easier to move around without much danger involved.

Radial arm saws usually are set in one space and stay there. They are heavier, and their long arm makes it an awkward carry when moving it to its proper spot. Also, they typically require a large base, so you really have to have the right kind of workshop to keep one around. Miter saws are the much cheaper and more-readily available option.

These types of saws are commonly seen in most hardware stores where radial arm saws are a bit more of a rare find. Do not be concern about only the features of the saw but also how to use it safely.

Every tool has its guiding instructions. Step 1: Safety Precautions. You should take all safety precautions before you start. The protection of hearing is essential because these machines are tall and work close up. When working with wood and any other materials, eye protection is essential. Loose hair must be pulled back so that it does not enter the saw or work area.

Step 2: Adjustments. This prevents the blade from getting in contact with the wood before clearing it. Check all keys in the correct place to ensure they are secured. Never use tools for pressing buttons unless the machine is designed to do so. Step 3: Set The Table. Most radial arm saws have a replaceable wooden table. Make sure the table is on the correct height before cutting. If you lower the table low enough to change the reduced cutting angle, you can save yourself a lot of trouble later on.

When the table is low enough for an angle shift, you can return it to the table. Step 4: Measure Materials. This is because you need to take steps before starting to work. To get the angle signals right, make sure to use a square saw or brace. Since your saw is cutting correctly, untested measurements will make you count. Step 5: Start Your Cut. When the blade starts lower, they saw to the starting cutting position. Make the exact cut you need, slowly. Pull the saw through the wood before done cut.

If you need to raise the saw to get the angle back, be sure to raise it with your handle. If you allow the saw to be reinstalled without guidance, it could be damaged and will require more effort to get back to normal. Both radial arm and table saw are excellent in cross cutting, smoother, dodo, rabbit, shape or mold, etc. A table saw must be positioned in the middle of the workplace while the radial hand saw can be mounted on the workplace wall, which can be considered its ideal location.

The radial arm saw can be used by adding certain accessories such as a disc cutter, disk or drum grinder, surface speedboat, router, horizontal drill, and even as a lathe drive unit. More so, the use of a table saw is restricted to the grinder and the disc mill only.

Before buying any product, we must conduct some research to enable us to get the best tools. The same thing that applies to purchase a radial arm saw some features one needs to consider. This determines what type of work can be done using a radial arm saw. Power is typically measured by an amplifier and depends on the size of the blade to be used in operations.

And, amps of power is enough for an average size. The speed at which the blade progresses is important to remember because it will determine the type of wood it can work with. There is no better option for specific carpentry work all in one kit.

But there are various configurations for different kinds. You need to have many angles to work with to get the most out of the saw. This makes the production of various types easier. A radial arm saw can provide multiple cuts, such as cuts to the center, cross sections, angle, etc. And to do that, you have several attachments that can be swapped one by one to accomplish various activities as you wish. Working Table. The table attached to the saw should be of high quality because every work will be placed on it irrespective of the weight of the materials.

So you should especially look for a large table saw to allow you to work with large pieces of wood. It is vital that the right blade is chosen. The blade is a key feature one must consider when buying a radial arm saw. Blade are available in several colors, shapes, and sizes. The effectiveness of the radial arm saw is determined by the sharpness of the teeth and the number of teeth along the blade.

Incidentally, the video does not intend to demonstrate ripping, I was just standing at that camera angle while I was talking. Thanks for the video. I just picked up a DeWalt for free, so it was a helpful introduction.

One item you didn't mention is the ability to see your marks and your cut. That's especially handy when making repetitive cross-cut dadoes. If you dado a lot, the RAS is indispensable. To me the RAS is like sailing and driving a stick — it's not for just anybody.

It's been sitting quietly in the corner and while it runs could use some TLC. It has a belt sander attachment on the back that runs off the motor but it's a nuisance, awkward, etc.

One of these days I'll cobble together a home made version. Great posting. Thanks …. I predict that they will be all but phased out in the near future.

If you are thinking about getting one I suggest you take the first opportunity and get it now. I think Sears still carries them in their inventory but most other big stores are not showing them anymore. I use my radial saw all the time. It delivers a nice face full of sawdust on any rip cut. It's marvelously flat and stable.

Like all tools, it's only as safe as the operator. If you feel that the tool is not safe you are likely using it wrong. I have used my RAS to its full capacity performing compound miter cuts, cross cuts, dado cuts and of course ripping. Now if you use the blade guards, the dust shield, the riving blade and anti kickback pawls as shown in the manual the saw is perfectly safe. The direction of ripping that you demonstrated is backwards and yes I read your note The problem that I find with the RAS is the size of the saw.

It takes up a lot of valuable real estate and it's not portable. If properly educated,this saw is safe. Yes dangerous when used by inexperienced like all power tools. Accuracy is dependent on how much effort used during initial alignment. I love compound mitering.

Also the outboard rip allows sheet goods to easily be ripped in 24" widths. Remove the blade,install drum sanders on aux shaft is pretty handy also. If you use the anti kickback Paul's you won't have any trouble.

I Is A Radial Arm Saw Worth Having Go have also seen experts feed from the wrong direction while ripping,,,yea,,that's not safe. Be safe,good luck. I've been using RAS since I've been 14 yrs. I have a old delta 12" 3 phase commercial and a old Dewalt 10 in my shop. I can' t seem to go to sliding chop saws although I think there very versatile. I just like RAS.

I never ripped on one and never wanted too. If you have the room and can get one reasonably priced I recommend you get one. Negative rake provides that the blade will cut instead of grab the work. A positive rake blade will "crawl" up the work. I do everything on a RAS. I don't even own a table saw. Thanks for your video.

In late , I was looking for an owners manual for my used Craftsman RAS, And discovered there was a recall on them, I went to the recall web site and entered my model and I was shipped at no cost, a safety upgrade kit for my yard sale find..

I have not yet added the up-grade kit, but the shipping weight is around 45lbs. Great tool. My Grandpa was missing two fingers on his left hand courtesy of a radial arm saw. Didn't scare him away from power tools and even still used an RAS, though I'm not sure if it was the one that claimed his digits. That didn't scare me away from power tools either but it did make an impression and I've always had a healthy respect for power tools and a mind towards safety.

His accident was long before I was born, but just the sight of those missing fingers every time I saw him left a pretty good impression. Anyway, any tool can be dangerous, and one must be conscious of where his or her body parts are at all times. Go not ever do this, but, I will show you how to do it? Having used my RAS since , the most dangerous thing to have on one of these saws is a dull, garbage blade.

Appreciate the vid and thanks for sharing but I have to disagree on your comments re: "not accurate" and "not good for ripping". Almost all saws of this type come with adjustment mechanisms to keep it in good form.

Keep the table true and the radial arm and saw contact true all across the work surface. Garbage blade in any saw makes it an accident waiting to happen not to mention the damage it can do to your material!

Hammer Wooden Board Of Education Kreg Miter Saw Station Plans Wood Box Plans Free Download Unity