44 Best attic eaves storage ideas | eaves storage, attic rooms, loft room

I eventually got the bits to fit an underseat storage drawer on my SE it's standard on the Elegance. I only fitted one drawer on the passenger UK side. The frame came ready fitted with rubber buffers 6Q and drawer guidepieces 5N and the metal clip, see Photo 4. I needed a bolt N for the carrier metal clip and already had a clip and bolt as per Photo 6.

It was very fiddly trying to work upside down in the passenger footwell. It looks drawer storage under eaves 40 it would be easier if you could swivel the seat up by undoing the front pair of hinge bolts that are part of the raising and lowering system. I did not have a large enough Torx bit so I did it with the seat in place.

The drawer unit consist of two main items, the drawer itself and its carrier. Once the carrier is fitted the drawer just slides into it.

Fitting the carrier is the fiddly bit. I found the screw that holds the plastic side of the seat base in place and undid that. It made it marginally easier, although it was a pig to put back and tighten up when it was all done. The two plastic tabs at the bottom of the picture just slide into slots in the seat base at the back. There is a plastic mount seen top right of picture where it is screwed to the seat base. I ignored the similar plastic mount to the left as the left side of the Carrier is held in place by the metal clip fitting see next.

The metal clip top left in theory sits on top of this tab under the seat, the screw going through the tab and into the clip. I just couldn't get the carrier to sit on this metal tab as the angle needed to get the rear plastic tabs into the seat base precluded sitting the front plastic tab on its metal tab.

I eventually took the metal clip off of the Carrier and put it on the metal tab, screwing the carrier up to it. The seat side panel doesn't quite line up with the drawer, and I have not worked out what to do to get it perfect, however, as drawer storage under eaves 40 need to be nearly upside down in the seat well to notice, I'm not too worried!!! It's seemed a lot of effort for a small drawer but it is perfect for those mobile phone chargeing cables that always seem to get tangled up with everything else in the glove box.

I am totally exhausted just reading that account, never mind being on my head in the well Well done you for persisting with it - just make sure that you use it every single day that you're out in drawer storage under eaves 40 Yeti from now on.

Thank you for producing this guide. I have moved it to the Yeti Technical Guides sub- forum and left a link to it in the original forum. Sorry, I have no idea. You need to develop a good rapport with the parts man at your local dealer. Read about and saw the pic's of the Pucker underseat storage retrofit and Heath Robinson Poundshop basket.

My version is inspired by the latter but adapted to prevent it sliding out on braking or bumpy roads. Using a 2litre ice cream tub contents drawer storage under eaves 40 at an earlier date Cut to shape and stuck anti -slip mat to top of lid using double sided tape.

Hidden from prying eyes of passing villains, makes the most of the available space and can be removed leaving no trace etc. My Yeti has underseat tray on passenger side fitted as standard, that's why my home made is for driver's side but I assume space is the same both drawer storage under eaves 40 so Ice drawer storage under eaves 40 doo dah would work either side and cost noughtplus VAT of course!

I've done something similar, but simply stuck it down to the carpet using the hook side of sticky backed Velcro tape. I've just finished fitting the underseat drawer following your instructions and using the clip and screw you kindly sent me.

I can't add anything to the instructions but agree with you that it would be much easier if the seat pivot bolts were removed so that the seat could tilt back a bit. It would make all the difference when fitting the clip to the seat base. Excellent instructions. Well Done. To make things easier I removed the front seat runner bolts and loosened rear seat runner bolts.

Slid the seats all the way back and this naturally caused the seats to tip back giving a few more inches of clearance.

The wiring is not strained nor does it need to be disconnected. The slots for the prongs of the drawers are more in the middle of the seat rather than at the back. The drawers are only about half the seat depth. I noted that Sanqhar had drawer storage under eaves 40 attaching the drawer frame to the seat and swapped the clip from the frame to the seat bracket.

In fact the bracket is only held to the seat frame with a single bolt hidden by the side seat plastic moulding, which you have to detach anyway. I removed the bracket, bolted drawer storage under eaves 40 to the drawer frame and then bolted the whole assembly to the seat frame. I am well pleased with the drawer storage under eaves 40. They operate and fit perfectly and give a more finished look.

I did the drivers side first Drawer Storage Under Eaves Kit and it took about 90 minutes. The passenger side was dispatched in 40 minutes. Practice makes perfect i guess!! I suspect not. The drawer fills The space forward of the central bar. I guess the seat motors have already staked their claim to the same area.

Thanks to Sanqhar for the photographs, they were a great help once I had worked out which bit was which, and then visualised them 'swapped' left to right!! The suggestion of removing the seat fastenings 33q's made a fantastic difference, I could actually see what I was doing almost though I have the same LED light as Sanqhar!!

I was able to do it without removing the seat side cover, just removing the screw at the front, this then meant that I could disconnect the bracket to bolt the side clip to.

Drawer storage under eaves 40 agree that you don't need to fasten both the top screws, just the one on the outside of the frame, and the side bracket. You will also need a 'Captive U nut' as per Sanqhar's photo above - my dealer found one in the 'gash box' - one drawer storage under eaves 40 the two slots where they fit under drawer storage under eaves 40 seat base are different sizes, drawer storage under eaves 40 I was only able to get one in, but as I said that's drawer storage under eaves 40 you need'.

Roscoe - I kept the draws from my Touran, hoping one day they would be useful I paid extra for them so I drawer storage under eaves 40 they were mine regretfully they won't fit the Yeti - so if you know anybody who want's a drawer storage under eaves 40 I've under-seat storage on the passenger side of my Roomster, but could never understand the preference Drawer Storage Under Eaves Kitchen for passenger-side is it just more room there?

However, in real life, I find that I'd love secure Drawer Storage Under Eaves Example storage under the driver's seat the safety fairy says you shouldn't put anything there unless it's secured as it's a great place to store charging cables, sat nav, etc, etc.

The under-seat space without the added kit gives ample space for anything from kittens to handbags; camera bags to lunch boxes; life jackets to parachutes; Oops, I'm rambling. Up-shot is, I've a simple question: "Is the under-seat storage drawer for the driver's side of sufficient capacity to persuade me to prise my wallet open? They are the same size. They are handed left and right. Only you can decide if they are worth the cost and effort.

I have fitted booth sides on my SE Plus. They do look neat. Think I'll be going for driver's side then - I prefer to leave the gaping chasm on the wom passenger's side. Haven't fitted the drawer yet, but hope to get it done in the next day or two. I'll post back if I discover any hints or tips not already covered. Fitted the drawer today.

As OP says, there's a slight misalignment doing it this way but I couldn't remove the side trim because:.

I was a bit OK, loads lazy by just tackling it with a torx screwdriver set. My local Skoda dealership 2 mins drive away from me are fitting mine for me tomorrow afternoon I tilted the seat backs to almost touching the rear seats, which allowed me to remove the 2 front seat Torx bolts. That gave a lot of working space to see how things fit. You can adjust how far the seat tilts without straining the wires under the drawer storage under eaves 40. I am thinking about fitting these.

I have had a look under my Yeti seats and then had another look at the pictures above. Am I right in thinking the drawer inner dimensions are approx. What is an approximate depth please? Bless this forum. Thanks to all the tips above I managed to fit the drawer within half an hour.

Additional tips: I used an allen bolt and an old fashioned cross-headed self tapping screw to fit the drawer. They are much easier to 'steer' into the right place and direction than torx-headed bolts and screws.

By the way: Superskoda do complete sets of the drawer, bracket and hardware, at Remember they are left and right handed. Does anyone know if the drawers will fit in if you have the umbrella holder and Hi Viz holders already fitted under the front seats?

You need to be a member in order to leave a comment. Sign up for a new account in our community. It's easy! Already have an account? Sign in here. By tow By OctyEstatevRS. By golf2.

May 22,  · 8 Under-eaves Storage Ideas for Your Loft Conversion you’ll be left with an angled area beneath the eaves. This low space is perfect for storage, but it can be tricky to decide how best to use the area. Here, the designers have built a dressing table with drawers beneath the lowest part of the sloping ceiling. It’s an ideal way to. Aug 5, - Explore mterre's board "attic eaves storage" on Pinterest. See more ideas about eaves storage, attic rooms, loft room pins. Oct 19,  · If you want 1mm gaps around the drawers, no problems. If you want mm gaps around the drawers, no problems. The only problem was the price $6,! Our IKEA hack option: Under-eaves wardrobe from IKEA kitchen cabinets. IKEA to the rescue. What we needed was a modular set of cheap cabinets which have high-quality sets of drawers.

Woodturning Tools For Sale On Ebay 4k Router Bits For Baseboard Trim Version Hand Plane Jointer Fence Upgrade Cnc Wood Carving Machine Ebay 5g