Band Saw Guards Osha 2019,Diy Wood Countertops Over Laminate,Free Wooden Music Box Plans Key - Downloads 2021
19.07.2020They protect your sight in case pieces of stock fly off or the saw blade breaks and injures your eye. Tie back your hair, remove jewelry, and wear fitted clothing so that you do not get caught by or pulled into the moving blade.
Before you do any maintenance work, turn the band saw off and wait for it to come to complete stop. If the band saw needs repair, unplug it and take it out of service until it is safe to use. During inspection and maintenance work, ensure that the blocks and wheels are adjusted properly and the blade is in good condition.
Set blade tension within manufacturer standards. Ensure the blade is positioned properly on track. All guards should be in place before use. A wider gap will place tension on the blade and increase the risk of breaking. Start up the band saw and let it come to full speed before you begin cutting. Keep the stock flat on the work surface; do not try to hold it in your hands.
Keep hands at least 3 inches from the blade. Use stock pushers, miter gauges, jigs, and fences when you can for accuracy and safety.
When you cut curves in material, move the pieces slowly to avoid placing too much tension on the blade. Wait for the blade to stop completely to remove the piece. The guard on the part of the blade between the upper saw and the sliding guide should be self-adjusting, raising and lowering whenever the guide moves.
The pulleys and feed rolls should have guards or enclosures as well. The saw should feature a tension control to show the tension of the blade. A brake minimizes coasting, or the continued rotation of the blade after turning off the saw. Brakes should be installed on at least one wheel. Operators should ensure that the blade is the appropriate type and size for the material.
Never attempt to cut material while the blade is coasting. Operators should use a stick to push the material when cutting close to the blade. Inspect the blade before operation and replace if worn or cracked. Wear safety goggles to protect the eyes from flying splinters or chips.
Restrain long hair and do not wear loose-fitting clothing to avoid hair or clothing becoming caught in the pulleys or feed rolls. Decibel levels should be checked and hearing protection worn if needed, particularly at high speeds.
Wood Carving Machine Manufacturers In Bangalore Make A Frame At Home Depot Homemade Cnc Wood Carving Machine Watch |
19.07.2020 at 11:49:49 Rail inset far enought to get the saw.
19.07.2020 at 17:39:20 Free woodworking projects, plans, tips, ideas & more something out of nothing get them for.
19.07.2020 at 19:44:24 Proficient at doing board or panel at a right angle, forming a rabbet joint the Craft. Interested.