Guild member Gary takes us through the techniques he uses to turn green wood into a bowl. The Grand River Woodturners Guild holds monthly meetings at the. Using green or Storing Green Wood For Turning Value part seasoned wood from hedges, woodland, gardens etc for your woodturning projects. Stable Wood Does not exist! Many visitors to our wood store come looking for nice seasoned discs or chunks of wood 3" thick or more, preferably with the face machine-planed to show the grain. They ask "is it dry?". What they want is wood which can be turned straight away and delivered to the user immediately, without any risk of warping or splitting. You might think this a reasonable request but as you progress with your woodturning, you will learn one extremely important fact of. The advantages of turning green wood are that it’s easier, less dust is created, its cooler on your tools (meaning less sharpening) and just plain fun. Let's hear it for turning green wood! When you receive your wood turning bowl blank, you can rough turn your item to speed the drying process. I use the 10% rule for wall thickness, but always leave it at least 3/4” thick when turning green wood. For example, when I am turning a 10 inch bowl, I will leave it one inch thick. A 20 inch bowl will be 2 inches thick. Mount the blank to your lathe between centers using a proper size spur drive i.
The best storage areas will have three things: light to moderate air flow, temperatures of degrees, and a moderate amount of humidity. Air flow is important to control the rate of moisture loss. Storing wood near fans, a/c or heating ducts is not recommended. Aug 28,  · A refrigerator or freezer can do the same. Save room by getting rid of some bulk from the piece first. In fact, if you remove enough wood and do all of the green carving stage, you can just let the piece dry and revisit it to do the finish carving weeks, or years, later. I’ve used green wood that had been stored for several months. To be safe, you should store wood blanks, before turning them, for as long as possible in an atmosphere close to the intended final environment of the finished turning. This will ensure the minimum movement or warping in the finished piece and prevent splits. You should allow about 4 weeks for 1" thick timber.

Woodworking Websites Furniture Number Wood Turning Wood Sealer Pocket Hole Jig Chennai