Welcome visitor you can Log in botrom Create an account. Using a straight, parallel motion, push the center stabilizer track in, along with both side suspension tracks. Wood Glides Wood-drawer slides are often found on older furniture like armoires or dressers. Even so, these drawers soft close bottom drawer slides line screws come out relatively easily. These adapters provide your cabinets with the soft-close experience with less hassle. Self-close hinges are a type of hinge that has a spring built into it so when you start to close a cabinet door, the spring, at some point, takes over and pulls the cabinet door closed with a tap. Home Search Advanced Search.

Self-close hinges are a type of hinge that has a spring built into it so when you start to close a cabinet door, the spring, at some point, takes over and pulls the cabinet door closed with a tap. Soft-close hinges, on the other hand, have hydraulics built into them so when you close the cabinet door, the hydraulics take over and ease the door closed silently.

The cabinet door appears to glide closed. Most hinges that are soft-closing are also self-closing, but not all self-closing hinges are soft-closing as the "thump" sound demonstrates. In the video below, Blum gives us a demonstration of first a Self-Closing hinge and then a Soft-Close hinge:. Note: An alternative to the soft-close hinge is a Soft-Close Adapter. Soft-close adapters are small devices that are installed into an existing cabinet without replacing the hinges. These adapters provide your cabinets with the soft-close experience with less hassle.

See Soft-Close Adapters. Welcome visitor you can Log in or Create an account. The final cost of the order will be calculated at the checkout page. Enter keyword This site requires JavaScript to function properly.

Please enable JavaScript in your web browser. If your furniture uses one center wooden track, it will take a bit more effort to remove the drawer, while wood-glide furniture with two side tracks will be a bit easier to work with. Either way, pull with enough force to overcome the resistance. It will eventually pop out. In some cases, the drawers in your furniture will have stabilizer screws, which add an extra step to the drawer-removal process. Even so, these drawers and screws come out relatively easily.

Just follow the steps below:. Be sure to work on the drawers in the proper order, by starting at the top and moving down drawer by drawer. This can result in an unstable piece of furniture that can wobble or tip over. Stand in front of the furniture, and leave enough space for the drawer to fully extend.

Pull the drawer out as far as possible. Pull all the way until you feel the drawer hit its built-in stopping point. Find the stabilizer screws inside the body of the drawer. There should be two screws. Once you locate them, remove them with the proper screwdriver. Typically, drawers use 8 stabilizer screws, which will require a Phillips-head screwdriver. Find the catch tabs, which should be on both sides of the drawer.

Release the catch while pulling upward on both catch-tab mechanisms. You will probably need to pinch the catch tab with your thumb and index finger; this will release the drawer from both side tracks. Be careful because even if you emptied the drawer ahead of time, it can still be pretty heavy. Also, once the drawer is removed, take a quick peek at the side of the drawer to see if there is any sort of number on it. This number will often be on a sticker or decal, and it indicates which opening in the furniture the drawer goes in.

Number 1 is typically the top drawer, with subsequent numbers on each of the lower drawers. Push the tracks back in before continuing to work on the piece of furniture.

Using a straight, parallel motion, push the center stabilizer track in, along with both side suspension tracks. The drawers in anti-tip furniture have cables attached to them that prevent multiple drawers from being opened at the same time.

This helps to keep the furniture from falling over or becoming unsteady—if multiple drawers are open, especially at the top, the piece can become top heavy and tip. The anti-tip cables help remedy that but also add an extra step in the drawer-removal process. However, following these steps can make removing anti-tip drawers easy:. This helps to keep the weight at the bottom of the furniture. Always remove the top drawer first; it is the safest and easiest way to work on a piece of furniture.

Stand in front of the furniture and make sure there is enough space for the drawer to fully slide out. Grab the front handle of the drawer, and extend it outward. Pull out on the drawer until you feel resistance. Open the drawer completely, and you will be able to easily see the anti-tip cable, which will be attached to the rear exterior of the drawer.

Use a screwdriver to unscrew it. Usually, the cable will be affixed to the drawer with a Phillips-head screw, so be sure you have a Phillips-head screwdriver handy.

Find and press the disconnect tabs. They will be near the back of the metal tracks, on both the left and right sides. Press down on both tabs at the same time. Be sure to press down fully and continue to press inward as you remove the drawer. Pull the drawer out with the tabs pressed down.

As you pull toward you, tilt the drawer upward. It should pull free from the furniture. Be careful because the drawer will likely be heavy. Make note of it because that number indicates which slot in the furniture the drawer goes in. Usually, the drawers are numbered from top to bottom, with smaller to larger numbers.

For example, the drawer marked with a 1 will likely be the top drawer. Remove the drawer. The tracks will likely be protruding from the furniture slightly. Push the metal tracks back into the piece of furniture before proceeding with working on the piece.

Woodworking Online Test Questions Hand Carved Wedding Candles For Sale Woodworking Projects Side Table 51 Cnc Wood Design Cutting Machine Worksheet