Pure tung oil Pure tung oil is easy to identify because it contains no solvents. The better the wood Minwax Tung Oil Finish Food Safe Games preparation, the better the final result. View all Stains. Blends consist of an oil or oils mixed in with a varnish. Keep container closed when not in use.

Brush it on and, rag guide your finish. Do not rag it off, simply smooth it with a good cotton lint free rag Tee Shirt. Joined Jan 23, Messages Likes To the OP. I've refinished stocks with Minwax Tung Oil.

Whatever is in it, it has always turned out well. I like the fact that the build up is slow. It allows me to get just the level of sheen I want. If its not shiny, just keep putting coats Minwax Tung Oil Finish Food Safe 05 on. I wet sanded with mineral spirits between coats. Once I had what I wanted, I used Steel wool with pure paste wax and buffed it with the wool and wax. I've done gun stocks this way as well as furniture.

It always comes out gorgeous. I've since switched to Minwax Wipe On Poly. It won a recent shoot out in Fine Woodworking Magazine. It was a blind test. The testers were given unmarked bottles and used the stuff. There were several BLO and raw linseed variants as well as esoteric stuff and tung oil. Wipe on Poly won the shoot out. I use it a lot. It works just the tung oil. I do wonder if its not just regular poly cut down so each coat builds less.

Either way, it works great. The purists will hate me but I worked great on an M1 Carbine I did. Its worked on the three stocks I've refinished.

NES Member. Birchwood Casey Tru Oil can be made quite glossy if you sand between coats. I knocked down the finish coat with steel wool. Last edited: Dec 16, If I remember my history correctly, when these rifles were made, it wasn't even applied in coats. I believe the stocks were submerged in hot tanks of the stuff for some length of time.

So they were still stickey and gooey when issued. Knicks NES Member. I used formbys tung oil finish. The furniture on my ak came out a little glossier than I wanted but I'm happy with it. Took several coats over a course of 10 days. Sanded with steel wool between coats. I don't know what hikerlit uses to buff, but the combination of steel wool and Simoniz original paste wax works fantastic. Post reply. Insert quotes…. Share: Twitter Reddit Share Link. You have to wait at least two to three days for each coat to harden.

And it takes five to seven coats to get a protective film. Rushing the process, or applying too thick a coat, causes wrinkling, which has to be sanded off. The results can be gorgeous, as long as you have the necessary patience.

Both types do this by adding man-made resins and solvents to keep those resins in solution. The difference between these two is subtle. Blends consist of an oil or oils mixed in with a varnish. A varnish is made by cooking resins in a hot oil until resin and oil form a chemical bond. Wiping varnishes are just what the name implies—straight varnishes that have been thinned enough to be wiped on with a cloth. All the oils in a varnish are bound up in the resin.

Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator NIOSH approved and proper containment and cleanup. DANGER: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded.

Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.

If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection NIOSH approved or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage.

For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. Contains solvents which can cause permanent brain and nervous system damage.

705 Band Saw Blade For Metal Best Old Lathes