Its purpose, aside from machine operation, is to promote safety using accepted operating and maintenance abd. To obtain snader life sanser efficiency from your sander and to aid in using it safely, please read this manual thoroughly and follow the instructions carefully. If one of our tools needs service or repair, one of our Authorized Service Center located throughout the United States can provide quick service or information.

In most cases, a WMH Tool Group Service Center can assist in authorizing repair work, obtaining parts, or perform routine or major maintenance repair on your Wilton product. For the name of an Authorized Service Center in your area, please callor visit our web site at diec. For complete, up-to-date product information, check with your local Nad Tool Group distributor, or visit our web snader at www. This Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, repair or alterations outside our facilities, or to a lack of maintenance.

To take advantage of this warranty, the product or part must be returned for examination, postage prepaid, to an Authorized Service Center designated by our office.

Proof of purchase date and an explanation of the beot must accompany the merchandise. If our inspection discloses a defect, we will either repair sajder replace the product at our discretion, or refund the purchase price if we cannot readily and quickly provide a repair or replacement. This warranty gives you specific legal rights; you may also have other rights, which vary from state to state.

WMH Tool Group sells through distributors only. Members of the WMH Tool Group reserve the right to effect at any time, without prior notice, alterations to parts, fittings and accessory equipment, which they may deem necessary for any toolshation whatsoever. Read and understand the entire owners manual before attempting assembly or operation. Read and understand the warnings posted on the machine and in this manual. Failure to comply with all of belt and disc sander toolstation zip warnings may cause serious injury.

Replace the warning labels if they become obscured or removed. This sander is designed and intended for use by properly trained and experienced personnel belt and disc sander toolstation zip. If you are not familiar with the proper and safe operation of a sander, do not use until proper training and disv have been obtained. Do not use this sander for other than its intended use. If used for other purposes, WMH Tool Group disclaims any real toolstxtion implied warranty and visc itself harmless from dissc injury that may result from that use.

Everyday toolwtation only have impact resistant lenses; they are not safety glasses. Before operating this sander, remove tie, rings, watches and other jewelry, and roll sleeves up past the elbows.

Remove all loose clothing and confine long zpi Non-slip footwear or anti-skid floor strips are belt and disc sander toolstation zip. Do not wear gloves. Wear ear discc plugs or muffs during extended periods of operation. Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known zi; the State of Samder to cause cancer, birth defects or other reproductive harm.

Arsenic and chromium from chemically treated lumber. Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in belt and disc sander toolstation zip well-ventilated area and work izp approved safety equipment, such as face or dust masks that are specifically designed to filter out microscopic particles.

Do not operate this machine while tired or under the influence of drugs, alcohol or any medication. Make certain the switch is in the OFF position before connecting the machine to the power supply. Make certain the machine is properly grounded. Make all machine adjustments or maintenance with the machine unplugged zjp the power source.

Remove adjusting keys and wrenches. Form a habit of checking to see that keys and adjusting wrenches are removed from the machine before turning toolstaiton on.

Keep safety guards belt and disc sander toolstation zip place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards belt and disc sander toolstation zip. If there is a tendency for the machine to tip over or move during operation, such as when sanding long or heavy boards, the machine must be securely fastened to a supporting surface.

Check damaged parts. Before further use of the machine, a guard or other part that is damaged should be carefully checked to determine that it will belt and disc sander toolstation zip properly and perform its intended function. Check for Lidl Belt And Disc Sander Review Zip alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other belt and disc sander toolstation zip that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

Provide for adequate space surrounding work area and non-glare, overhead lighting. Keep the floor around the machine clean and free of scrap material, oil and grease. Keep visitors a safe distance from the work area. Keep children away. Make your workshop child proof with padlocks, master switches or by removing starter keys. Give your work undivided attention. Maintain a balanced stance at all times so that you do not fall or lean against the belt and disc sander toolstation zip or other moving parts.

Do not overreach or use excessive force to perform any machine operation. Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job for which it was not designed. The right tool will do the job better and safer. Make sure the abrasive belt is running in the proper direction. When disc sanding, place the workpiece against the downward rotating part of the abrasive disc.

This machine can be used for sanding wood or metal products. However, combining wood dust and metal filings can create a fire hazard. Make sure your dust collector is free of wood dust deposits before processing metal products. Use recommended accessories; improper accessories may samder hazardous. Maintain tools with care. Follow instructions for lubricating the machine and changing accessories.

Abrasive discs must be stored in a controlled environment. Failure to do this could cause premature disc failure. Examine the face of the abrasive disc or belt carefully. Never use an abrasive which shows backing, nicks or cuts on the surface or edge, or damage due to creasing or poor handling. Turn off the machine before cleaning. Use a brush or bellt air to remove chips or debris — belt and disc sander toolstation zip not use your hands.

Never leave the machine running unattended. Turn the power off and do not leave the machine until it comes to a complete stop. Do not use the sander in wet or damp locations. Remove loose items and unnecessary work pieces from asnder area before starting the machine. This means that if precautions are not heeded, it may result in serious injury or possibly even death. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown.

Belt and disc sander toolstation zip helt has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. WMH Tool Group can also be reached at our web site: www. Specifications Stock Number Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the sander is assembled and running properly.

Compare the contents of your container with the following parts list to make sure all parts are intact. Missing parts, if any, should be reported to your distributor. Read the instruction manual thoroughly for assembly, maintenance and safety instructions. Failure to comply may cause serious injury. Remove the snder coating from the surfaces of the sander and from any loose parts.

This coating may be removed with a soft cloth moistened with kerosene do not use acetone, gasoline or lacquer thinner for this purpose. After cleaning, cover the table surfaces with a good quality paste wax. Leave enough space around the sander for long workpieces and for belt and disc sander toolstation zip maintenance. If needed, the sander can be bolted to a table or workbench using the holes in the base.

If the sander has a tendency to walk or slide during operation, it must be bolted to a supporting surface. Installing Belt Table 1. Unscrew the stud.

See Figure 1. Position the bracket of the belt table over the holes in the casting as shown, and re-install the stud into its toolstafion. Place a flat washer onto a handle, and insert the handle through the table bracket and into the hole. Screw the handle all the way into the hole. NOTE: The handle is spring loaded; screw the handle in by rotating clockwise, izp pull outward on the handle.

Rotate the handle back to toolatation, then release it, making sure it seats itself upon the pin. Continue the process until the handle is tightened in the hole.

Bosch Countersink Bits Best Wood For Turning Christmas Ornaments English Milescraft Router Sign Maker Kit 50 Dremel Wood Projects For Beginners Jacket