Apr 20,  · Scrapers are one of the most misunderstood but useful tools in a woodshop. A scraper in its basic form is simply a piece of hardened steel with a small hook that is created by pressing on the tool’s edge with an even harder rod Wood Scraper Sharpening Oil of steel. This tool is capable of making tear-out free cuts in hardwoods that no plane can manage. A clean, sharp mill bastard file 6" to 10" long is an ideal sharpening tool. It's easy to file the scraper's edges straight and square. Mar 30,  · If your scraper has been sharpened properly, it will produce fine shavings rather than dust. Bend it slightly and lean it forward so the edge of the hook makes contact with the timber. This angle should be no more than 45°—if you need to lean it more than this, the hook is is probably too acute, and has been applied with too much pressure.
Mar 30,  · If your scraper has been sharpened properly, it will produce fine shavings rather than dust. Bend it slightly and lean it forward so the edge of the hook makes contact with the timber. This angle should be no more than 45°—if you need to lean it more than this, the hook is is probably too acute, and has been applied with too much pressure. Apr 20,  · Scrapers are one of the most misunderstood but useful tools in a woodshop. A scraper in its basic form is simply a piece of hardened steel with a small hook that is created by pressing on the tool’s edge with an even harder rod of steel. This tool is capable of making tear-out free cuts in hardwoods that no plane can manage. Dec 15,  · Hold the scraper in both hands, angled toward you, and flex it to create a slight belly in the center as you pull it along the wood. Press down firmly—if the edge is sharp, you’ll cut thin curls like a plane. When the scraper starts creating dust or begins to chatter, it needs reburnishing.

Carpentry Shop Requisition Slip Query Woodworking Square Hole Drill Bit Mortising Chisel Set Flash