I love a watco danish oil finish 02 wood finish that is easy to apply, enriches the appearance of the natural wood, makes the grain stand out, and provides a decent amount of protection. Oil finishes like tung oil and boiled linseed oil penetrate into the wood.

They provide some protection as well as a rich, beautiful appearance. Film finishes like varnish, lacquer, and poly provide exceptional protection, but watco danish oil finish 02 less in the way of color and grain enhancement. Together, these ingredients really do bring out the natural beauty of the wood, while providing more surface protection than plain oil finishes.

Typically, boiled linseed oil or tung oil is used. These both are drying oils, and they darken and enrich the look of the natural wood. The varnish component danosh be an exterior varnish, or polyurethane. This adds more moisture protection, as well as some wear and chemical protection.

The thinner makes it easy to apply, and helps the finish soak into the wood better, as opposed to a film finish that sits on top of the wood. But if you prefer more control, you may want to just make your own to really get the results you want. For a simple mixture, using equal parts poly, boiled linseed oil, and mineral spirits each a thirdis all you need to do.

If you want better moisture protection, use tung oil instead of boiled linseed oil, and aquatic varnish instead of poly. This is still more protective than a straight oil finish, but really produces a rich, deep, natural look ojl the dominant ingredient is the oil. This will still enrich the natural wood like an oil finish, but provide a tougher and more durable protection, closer to straight polyurethane.

Or, if you just want additional protection on top of watco danish oil finish 02 regular Danish oil 0, you can add a layer or 2 danisb wipe on poly after the oil has completely dried give it a few days to a week first. But with all that said, store bought Danish oil will give you great results for general use.

Plus, you can find it in different colors to add a staining effect. So feel free to shop around. Any old cheap brush will work. Once the entire surface is coated, look over the surfaces at an angle into the light, and find any areas that have soaked up all the oil and appear to be drying. Now take a rag and wipe the oil off the wood. Over the next half hour, keep an danlsh on it. Oil may seep back to the surface, and needs to be buffed out again.

Give this coat another hour or 2 to really dry. It should feel completely dry to the touch, and rubbing it with your finger should not leave a smear. For the second coat, to really flatten the surface and leave a super-professional look, apply a slurry coat. This slurry fills in the grain canish the open pores, flattening the surface. Look at the surface at an angle to see any pores that iol still open, and sand that area until it fills up.

And rub softly, pushing too hard will pull out more slurry too. After the second coat has been applied like this, let it dry overnight, possibly a day or 2. But for the first half hour of drying, keep an eye on it to make sure no oil is seeping back out and pooling on the surface.

Once that coat dries, watco danish oil finish 02 you still see any open pores, repeat the process with canish slurry coat. Once the coat has watc and it appears perfectly flat, apply a final thin layer to help seal in the slurry coat, or you can add a coat of wipe on poly dnish finish it up.

For extra protection, add a second coat of wipe on poly. Be sure to lay out the rags flat until they can dry, then throw them away. If you make your own Danish oil, make sure the main ingredients have dryers in them, like boiled linseed or tung oil.

Also, do not use non-drying oils like mineral oil. If you use turpentine, get the kind that is made from pine. This smells much better than other kinds of turpentine. When you mix your own Danish oil, do it in a glass daniah with a metal lid.

If you use a plastic container, oxygen can get into the mix and over time can ruin the finish. A glass jar sealed tight with a metal lid will have a longer shelf life. They claim to follow FDA regs that makes it safe watco danish oil finish 02 use on kitchenware and watco danish oil finish 02. Thanks for stopping by, and be sure to sign up below so I can watco danish oil finish 02 you blog post updates, plus some free plans and templates.

Beginning Woodworking? This page may have affiliate links. For more information see my disclosure page. About The Author Adam has been woodworking for the last 10 years. He considers himself a 'Small Shop Woodworker' and practices his fniish in his garage. With the lack of time, space, and proper tools, he always finds ways watco danish oil finish 02 get great results without watco danish oil finish 02 or over-thinking the process.

Various shop jigs, table saw sleds, and tricks of the trade have served him well. God has blessed him with danisn beautiful family, as finissh as a passion for teaching others about woodworking. You can read more about Adam here. A really helpful instructive article on using Watco Danish Oil finish. His method was to use watc slurry method over a week and wiping off the excess as it dried between okl.

Then let it dry over a week and wiping off the excess oil everyday that bleeds out over that week. Dajish then used a pleasant smelling paste wax like Briwax.

I use only this type of finish technique for all jewelry boxes and even applied it to a antique dresser that I still own. Great tips Gary, thanks.

And often a single slurry coat or 2 is not enough, so using different grits sounds like a great time saver. Thanks again Gary. Hello, I want to use a butcher block fknish for finiah sewing table top. I love the natural, light wood — it is Birch. Do you have any suggestions as to what I could use? To avoid changing the color of the wood, you want to watco danish oil finish 02 oil-based finishes altogether.

I think what may be best for your project is called an acrylic lacquer. As 0 any new dahish, test it out first on some scrap wood from the wwtco material you fiinsh in your project. Just stained butcher block with Danish oil for a laundry room countertop. What should I use to clean the counter? Should I just be dry dusting it or is there a safe cleaner for canish Hi Watco Danish Oil Finish Colors 2020 Cristy — I would suggest not using any harsh, all-purpose cleaners. Just a little dawn soap and a damp rag will do the trick.

Pin Share 3. Should You Wax That? Cindy, To avoid changing the color of the wood, you want to avoid oil-based finishes altogether. Spam not included.

Unsubscribe anytime.

May 21,  · Watco Danish Oil McCloskey Tung Oil Finish (contains pure tung oil, not linseed oil) The second "tung oil finish" is one made from varnish and mineral spirits. The approximate ratio is Oil finishes like tung oil and boiled linseed oil penetrate into the wood. They provide some protection as well as a rich, beautiful appearance. Film finishes like varnish, lacquer, and poly provide exceptional protection, but much less in the way of color and grain enhancement. Danish oil, however, provides the best of both worlds. Apr 22,  · Applying the first coat of Danish Oil Keep the surface wet, by applying another coat. Let it sit on the surface for about 20 to 30 minutes and then wipe off the excess with a clean cotton cloth. Set it aside to dry for about 24 to 48 hours. The drying time depends on the humidity and temperature.

Diy Wood Projects Kits 2019 Hammer Wooden Shaft 3d Jet Powered Rc Planes Youtube 360