Wally is a current customer and you are an ex-employee? As for my purchasing a Laguna product, Laguna suv bandsaw review pdf though it was a hands down decision…now I am considering alternatives even if it means spending more in the short term… Thanks again to all contributors, we do make a difference when we voice our experiences! Just in looking at the Jet it doesn't look like you are gaining much, if reiew for the extra money. I allow a few days to set up new machinery. That's a nice cut.

We got the 14SUV a couple of years ago and it is one fine saw. It will resaw about Our saw has the 1" Resaw King blade and it tensions just fine but it is a thin blade.

If you want to see it in action on that particular cut here's a short video I've posted this before but I like the video - LOL! That's a nice cut. What was the actual time of making the resaw cut though? That's why I was saying either would be a fine saw for making an occasional piece of furniture, but not really for producing a lot of resawn lumber. I tried to find a youtube video of someone using a large bandsaw with a 1" Woodmaster CT 1.

I'll try to remember to make one the next time I use mine. I tried every good blade there was on my 14" bandsaw, and when I bought the 24", that really could tension the Woodmaster blade, I sold all the carbide tipped resaw blades for the 14".

The same cut that took 20 seconds or maybe it was not remembering clearly , took 2 seconds on the big saw, with no loss of cut quality. I don't remember the tooth count on the Resaw King I had for the 14", but the Woodmaster is 1.

I'm not trying to run down the smaller saws, but there is much more to it than simply size and hp. When people say it can't really tension a 1" blade, I think they are thinking Woodmaster, rather than Resaw King.

I don't remember the thicknesses of the Resaw King, and the Woodmaster CT, but the difference is significant. I don't see significant difference between a 14 and 15 inch saw. The 24" has about a 4 hp, and it never gets warm, even pushing it hard for a couple of hours. Thanks, Tom. I went back and looked at the original video and both cuts took right at I could have cut it faster but there were several factors involved - this was the first time I had cut anything that wide, it wasn't my piece of wood someone sent it to me to cut , and it was expensive and there were no backup pieces if I messed this up.

But, this is just our little home shop and not a production facility so 90 seconds is fully acceptable to me. For us in our little setup that represented some cuts that demanded our attention. It's a good saw that I only use for resawing so the 1" Resaw King blade never comes off; I don't even have other blades other than a backup for this one. I have a King-Seeley 12" that I use for everything else. In my particular situation, there are two issues that lead me away from a bandsaw mill and to one of the bandsaws I listed.

The second is that you can't always have everything at least at once , and given the choice between a bandsaw mill with one primary purpose and a bandsaw that can perform routine bandsaw work and additionally do some mill work within it's capabilities , the later option seems like the best place to start.

My personal log milling will generally be the occasional fallen or dying tree as well as any cull trees trees harvested to allow more valuable nearby growing timber to prosper and consist of logs less than 14" in diameter and typically cut into a 4'-6' section for easy handling. Back at the shop, they will likely turn into 1" maybe up to 2" thick boards and Laguna Lt14 Suv Bandsaw Review 201 stickered perhaps in a homemade solar kiln until dry and ready for use in whichever projects that happen to develop.

Larger logs and more valuable timber that are not part of a scheduled harvest would be taken to the nearby commercial hardwood sawmill less than 4 miles away and sold, or perhaps a local Amish or similar mill for sale or processing.

I'm not looking at a lot of dedicated home milling and am basically focusing on utilizing what I have readily available and preventing it from simply becoming a piece of firewood or left to rot as forest debris. Being retired, time isn't a huge factor and thus I can deal with a slower speed of cut as well as a longer drying time for thicker stock before being resawn at a later date.

The additional shop-time and intricacies involved in home-harvested wood and processing can be rewarding in itself and my goal is to continue enjoying my retirement status and not become overly involved in a high production operation.

From what I've been able to find online videos, forums, etc. I truly DO appreciate all of the feedback and the other posts on this forum and the insight presented. The brain cells have kicked in to weigh each point and I am continuing to refine and further my research with the hope that the end result will bring many years of pleasure.

Check Craigslist near you to see if you can find a used, big bandsaw. We used it to resaw 10, lineal feet of Cypress shingles with it, as fast as the wood could be pushed through the saw-boards to a heaping pickup load of shingles in 2 hours.

I've used it for resawing other stuff with it multiple times since that job, and am still using the same blade. A saw like that would have an easy time with what you want one to do. I'm afraid you will be dissapointed with the new saws you are looking at, as far as their capability goes.

I also have a 14" Delta, that belonged to my Dad, that has every available upgrade, so I am pretty familiar with what a 14" saw will do. I sold all the little used resaw blades I bought to try after the first day of use with the big guy. I leave the 24" set up for resawing. Your shop has plenty of room for one. Whats that like You was moving Tom Cancelleri. It didn't take 10, lineal feet to fill up a pickup.

I didn't count how many truck loads we got out of it. First we ripped it on a tablesaw without a fence to get rid of sapwood, and put a cut in the center of the arc of growth rings.

The next step was to cut the 8' boards into 2' lengths. I tied the switch on a chop miter saw. One helper pushed the board to the stop. I chopped the cut as fast as I could slam the saw down with my left hand, and handed the cutoff to the other helper who stacked them next to the bandsaw. All tools were stationed so fewest footsteps possible were made.

I made a sled that the 2" board rode on to cut two tapered shingles out of it. I pulled the sled back, first helper put a 2' board on, I pushed it through maybe 2 seconds-took 20 to 30 seconds on the 14" saw , and other helper took the two shingles off the sled, and stacked them in the truck, that was backed up close to the saw. The sled has safety stops on it, so no hand was every anywhere near the blade.

Jet JWB 10" bandsaw on stand. Rikon 10" benchtop bandsaw. Ryobi BSG 9" benchtop bandsaw. Grizzly G 9" Benchtop Bandsaw. For more related content, subscribe to our newsletter! Skil 2-hp Plunge Router. Tip of the Day. Find Those Hidden Biscuits.

I wonder if anyone else had any issues, and if they have improved things. It seems that while Laguna can put out a good machine, the overlook and ignore small but sometimes critical details such as the belt in your case or the dust collection flange or trunnion in my case. Chris, Since I had not paid for the saw, I felt very awkward and did not want to call and complain.

Had I had to pony up the initial several thousand dollars, I am sure I would have been extremely irritated. All things considered, the saw is a real gem in every other respect. I use it in the shop regularly, and it is a great resaw, and very accurate as well for cutting tenons, etc. Although I have to say I often wonder if anyone else had or is having the same issue.

Lucky for me, the lower wheel casting is very beefy and had more than enough room for a second V belt groove. I have looked at other Laguna tools in the past several years — but have always opted to go with something that is more easily obtained here in Ontario, and has some easier recourse if a problem occurs. I, too, always prefer to buy machinery locally. Besides supporting local businesses, it means being able to examine things first hand and go pick up parts instead of waiting for them to arrive by mail.

Hi, Andrew.. I was nominated by a friend, and it was a complete surprise. Pretty cool, I have to admit! Good for you! Hey guys, check out the dirt on Laguna on LumberJocks. More or less the same disasterous Customer Service you describe here but more grist for the mill. I have purchased the Laguna Fusion Table saw from Rockler. Rockler will not even talk to me about the saw, but instead passes you on to Laguna.

I have been assembling it for 2 weeks so far. It looks like it was written by someone who knows about table saws in general, but never saw mine!! Spare yourself the frustration that I went through. Not one thing precise. Worth it to get rid of that pile. I am in the camp that believes that when you buy machinery, regardless of the cost,, your going to be pulling some wrenches and fixing things. I have a Felder RL Dust collector that has burned up 2 x run capacitors.

I could go on and on about the troubles I have had with new machinery.. You make the adjustments, pull some wrenches..

Hi all, I am enlightened by this forum and thank everyone that has made a contribution. I am certainly better educated on purchasing a Laguna bandsaw or any product for that matter. It would appear that my own intuition has perhaps failed me in assuming the Laguna name meant the highest quality. As for my purchasing a Laguna product, I though it was a hands down decision…now I am considering alternatives even if it means spending more in the short term… Thanks again to all contributors, we do make a difference when we voice our experiences!

As for Torben… Hope your paying attention. Since you must not have done your homework, Or really spoken with anyone credible I must disassociate from you. I have found my Laguna saw a mixture of bad thinking and inferior part manufacture. If you recommend them, then you must have some sort of repayment or alliance.

But you surely cannot be trusted. I am guessing that, based on the content of your comment, you meant to direct it at me, not Cal. If so, I can assure you that I have no alliance with Laguna nor did I receive any compensation for writing the review. Your judgement of me is completely inaccurate. While looking at new band saws at my local tool merchant, I was approached by another customer. I have been using my Laguna SE14 powered by a 3HP Baldor for about ten years now and it has been a good saw for resawing and tenon cutting.

When I first received it I had to spend some time tuning it up. The fence rail holes needed to be elongated so the fence would slide parallel to the table.

I also had to shim the throat plate. No big deal. It was originally wired for V and I installed a V line to the shop. I called Laguna and the rep said I needed a new switch. When I opened up the original switch, it was already capable for V. I ended up sending the new switch back to them. IMO Laguna makes tools that are capable with a little bit of work. Castings are rough but the parts are beefy.

In contrast, my Swiss made Inca machines and Sawstop are precise and ready to go right out of the box. I know if I ever buy a Laguna tool again, it will take some work and time to get things running right. Just wondering if your LT 16 is still working good for you as I see you mentioned earlier of a update with Laguna and Canadian Woodworker. I am looking at a lightly used LT saw in Winnipeg that apparently came from there store in BC. What flaws do you think need remedying? I have a Minimax SP and want to use this saw for everything but resawing.

So nothing to really be concerned about then in your opinion? As it sounds like this is your old saw. OK Wayne, Let us know the problems you are having. I have spoken to Wayne and his partner. They claim that we have mislead them on how fast the machine can cut. They took this to mean that they would be able to cut at inches per minute. I explained thoroughly that it is the material and the bit that ultimately determines the cut speed.

They purchased the IQ to primarily cut acrylic. Acrylic is typically cut at no more that inches per minute. Any faster and cut quality is diminished. This limitation applies to any CNC regardless of size, cost or horsepower. They also mentioned that they could not cut a circle when the machine arrived. This machine shipped from California to St.

Lucia in the Caribbean. Every machine is tested and the test board sent with the machine. They called customer service and we were able to trouble shoot the machine and fix any issues due to shipping. Finally, Laguna Tools has offered Wayne a full refund on his machine purchase.

We kindly declined and the offer for the full refund still stands. Must be three years ago now I bought a Laguna bandsaw from Woodwerks online, great company, and have used it extensively to rewaw with the resaw king blade I bought with it.

I have to lean into it to make it bog down but it will. Well hey, just my take. The service guy even drops by the shop when in the area you just cant beat that, If any of us guys out there had customer service like laguna we would have No business. My biggest challenge has been how incredibly frustrating it is to get the fence-to-blade runout dead on. It has taken me three different episodes with other experienced machinists and woodworkers, armed with several hundred dollars of measuring tools to get close.

I also sent off my fence extrusion to have it milled flat it was convex and take. Also, what is with the cheesy stick on logos and panel fronts that start to peel and fall off?

I think someone would have to talk a pretty good line to convince me to buy another Laguna-anything. I just bought and returneda laguna ut was an unbelievable bad experience the tires were so badly out of alignment u couldnt turn tire more than a quarter turn without bladecoming off called laguna whick was a nightmare they wouldnt stand behind there product at all customer service is really bad buyer beware. I am so glad to read your post for what new tortures are in store for me when the damn thing actually begins to run.

To avoid this I have decided to stop wasting time and return to the dealer. No sense trying to resuscitate something dead on arrival. About a month ago I purchased a used Italian Resaw Master bandsaw.

The price was fantastic. Got it to my shop and ordered some replacement ceramic guide blocks as the saw guides were missing the ceramic pieces. I called Laguna and after blaming me for ordering the wrong parts after some pictures they admitted they were mistaken. Then the negotiations on how I was going to get the parts. They initially wanted me to send the parts back before they would send me anything. They finally agreed to send me the correct parts.

In the meantime I also contacted a company called Space Age Ceramics. I told them what I needed the sizes and they sent me the parts in 2 days. I had the saw up and running and a day later the correct Laguna parts arrived after almost 3 weeks total. I stowed the Laguna parts for spares and have been happily resawing since then. Laguna did offer to send me one of their Pro Force blades for the inconvenience.

The saw was awesome for ripping, cutting bowl blanks, and doing small resawing jobs. Laser machines are not what I hoped. The pics and posted cutting parameters are impressive up front but the SmartShop EC watt tube just does not cut through wood I thought it would even with sharp alignment.

Not even close! Hello Tom, it would be nice to know a few more details. I have a Laguna laser and get great results. Perhaps I could help you get better results. Also, what were your power and speed settings? Are you sure you have the laser focused correctly through the mirrors etc.

Still no laser!!!!!! All of the misinformation along with out and out lies. But back to the saw.

Milescraft Router Sign Maker Kit Github Jet Air Filtration Remote Zoom Miter Gauge Picture Frames Jackson