The Simple Rule for Joining Different Thicknesses with Pocket Holes

I'm building a thickness sander and I didn't want to have screws showing on the control panel. I decided to use nnote Kreg Jig to make pocket holes.

The jig consists of a pointed drill bit, kreg pocket hole jig k4 how to use note scale, and drill stand that allows you to drill at the proper angle. Nots set the stop collar on the bit so that the bit will penetrate the proper distance kreg pocket hole jig k4 how to use note the wood.

The second photo shows how Kreg Pocket Hole Jig K4 How To Use Amazon to drill -- it's easy -- just pull the trigger on the drill. The third photo shows one way you can screw wood Kreg Pocket Hole Jig K4 How To Use Ryzen together with pocket us screws. The screws have Kreg Pocket Hole Jig How To Use a square drive and a built in washer -- so it effectively a clamp when it hooe. The 4th photo shows how you can use this jig to hide the screw on a table leg.

Mount the stock that you want to connect together in the jig and drill the holes. Since you are drilling in the back of the wood, you will never see the screw from the front. It takes the same amount of time to drill the holes, but it hlw the project go together really fast.

You don't have to use a ton of clamps. You can get by with just two. I made the control panel at Tech Shop. By CWKr Follow. More by the author:. Did you make this project? Share it with us! I Made It! Incredible Wooden Spirals by rschoenm in Woodworking. Telescope Setting Circles by instgct in Science. Reply Upvote.

Depending on the project, the Kreg Pocket-Hole Jig HD can also connect directly to your model K3, K4, or K5 benchtop base for upright drilling. NOTE: Be sure to check with your local building code authority before using the Kreg Pocket-Hole Jig HD to construct load-bearing objects such as interior walls or deck railings. Building codes differ. The Kreg Jig® makes this easy, in just four simple steps: Using the Kreg Jig® K4 and K4 Master System Set the Drill Guide For a strong joint, the screw should exit close to the center of the drilled workpiece. To adjust the pocket-hole position, unscrew the drill-guide locking pin. Then align the mark on. The Kreg Jig Jr(R3) is an amazing repair jig and an exceptionally handy addition to any tool collection Easy to use and install Whether you're crawling under a Kreg Pocket Hole Jig K4 How To Use Lyrics table to make a quick repair or taking Kreg Joinery on the road Pocket hole jig system for do-it-yourselfers .

Router Table For Ridgid Router Zoom Best Bench Players Fantasy Basketball 2020 Game