Dopr Put the pulls in. After 30 years, Rudi Pfeiffer decided it was time for a new kitchen! Once the faceframe is installed, the plastic tracks can be inserted into the grooves. About Blum. I was wondering why you had to actually add hardware for your solution. The bottom glides have red markings and the uppers have black.

Have you ever looked? In my workshop, I made sliding doors using bypass closet door hardware. Those wheels are exposed and not right for my kitchen. I needed something sleek. After doing a ton of searching I found something that would work! The Hafele hardware includes: plastic guide track with 35mm upper and bottom glides. It definitely takes some planning to use this hardware.

The plastic tracks require a groove sized at 7mm wide x 9mm tall. Once the faceframe is installed, the plastic tracks can be inserted into the grooves. I used my Blum Eco Drill hinge jig to drill the holes for the glides. Of course I had to make some modifications to get the holes in the right spot. The jig had to be pushed away from the cabinet door in order to cut the hole in the right spot.

To push the jig away from the cabinet, I used a strip of MDF. Then I tried different strips until I got just the right spacing. I actually forgot to use the strips on one hole. Then I had to fill and repaint that mess and redrill — properly.

Each door gets a set of upper and bottom glides. The bottom glides have red markings and the uppers have black. Each glide has a tab that sits inside the plastic track, which keeps the doors centered.

The bottom glides have a wheel, in addition to the tab. This wheel rolls on top of lip of the plastic tracks. If you need to raise the door, the tab and wheel can be extended.

The top glides just have the tab that inserts into the track. After you set the bottom glide into the track, you tilt the door up and then extend the top tab into the top track. These Lock For Kitchen Cabinet Door Air are not the easiest things to get in place. A couple of them I was able to push in with my thumbs but some of them required — more force. You can see that in my video below. The doors are bypass, so either one can be closed on either side of the cabinet.

The wider one meant to be the back door, which would recess behind the faceframe stile on either side of the cabinet. I like how the doors look without them. What do you think? Do I need to bother taking the doors down and routing in a hole for the recessed pulls? Would it matter to you if you walked into this kitchen as a potential buyer?

What would you do? No promises that I will do what you say. I think it would be better to add them. The doors will surely get dirty where people are handling them in order to open and close them, and it will make them easier to open and close. Thanks Sandy. Not emotionally invested in this house any more. As for the handles, I was going to drill small round holes for a Hinges For Kitchen Cabinets Doors Model finger- sized cup recessed pull- if you can picture that.

I love the idea of repurposing antique glass doors. Bet that will be super cool. I can picture the finger holes and think that can work fine. Madison said the pulls are just ugly. Which surprised me. Speaking of aesthetics, what paint did you use on your cabinets?? Thanks for weighing in on the big decision. Semi gloss. The color is a custom white.

Your work is awesome- I am totally impressed by what you do- and that you even take time to write about it only adds to my amazement! The cabinet doors need the hardware. Rocker has the slides. Looks similar, but seems to be a different brand.

I never, never get tired of your genius. I think this is probably the hardest working and most inventive DIY blog out there.

I like it, and wood is easy to clean. Sliding cabinets are a whole nother story! LOL Really. What made you decide you want to sell after spending so long customizing your home? Are you going to finish the craft room space?

Hettich Knape and Vogt US Futaba Sugatsune Accuride International Fulterer USA Inc. Grass America Inc. Hafele America Co. Rev-A-Shelf 3. Woodfold - Marco Mfg Inc 1. Mechanical opening system 2. USA Bottom Center 9. Euro Side

Best Tape Measure For Woodworking 3d Build Your Own Twin Bed Frame Nz Dust Collection System For Garage Floor Number Wood Craft Company Name Ideas Now